Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
查找文件 普通视图历史永久链接Permalink
defBF532.h 60.5 KB
Newer Older
B
blackfin architecture  
Bryan Wu 已提交
1 
/*
R
Blackfin: mass clean up of copyright/licensing info  
Robin Getz 已提交
2 
 * System & MMR bit and Address definitions for ADSP-BF532
B
blackfin architecture  
Bryan Wu 已提交
3 
 *
R
Blackfin: mass clean up of copyright/licensing info  
Robin Getz 已提交
4 
 * Copyright 2005-2008 Analog Devices Inc.
B
blackfin architecture  
Bryan Wu 已提交
5 
 *
R
Blackfin: mass clean up of copyright/licensing info  
Robin Getz 已提交
6 
 * Licensed under the ADI BSD license or the GPL-2 (or later)
B
blackfin architecture  
Bryan Wu 已提交
7 8 9 10 
 */

#ifndef _DEF_BF532_H
#define _DEF_BF532_H
B
Blackfin arch: update blackfin header files to latest one in VDSP.  
Bryan Wu 已提交
11
B
blackfin architecture  
Bryan Wu 已提交
12 
/* include all Core registers and bit definitions */
B
Blackfin arch: move include/asm-blackfin header files to arch/blackfin  
Bryan Wu 已提交
13 
#include <asm/def_LPBlackfin.h>
B
blackfin architecture  
Bryan Wu 已提交
14 15 16 17 18 19 20 21 22 23 24 25 26 27 

/*********************************************************************************** */
/* System MMR Register Map */
/*********************************************************************************** */
/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */

#define PLL_CTL                0xFFC00000	/* PLL Control register (16-bit) */
#define PLL_DIV			 0xFFC00004	/* PLL Divide Register (16-bit) */
#define VR_CTL			 0xFFC00008	/* Voltage Regulator Control Register (16-bit) */
#define PLL_STAT               0xFFC0000C	/* PLL Status register (16-bit) */
#define PLL_LOCKCNT            0xFFC00010	/* PLL Lock Count register (16-bit) */
#define CHIPID                 0xFFC00014       /* Chip ID Register */

/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
B
Blackfin arch: update blackfin header files to latest one in VDSP.  
Bryan Wu 已提交
28 29 
#define SWRST			0xFFC00100  /* Software Reset Register (16-bit) */
#define SYSCR			0xFFC00104  /* System Configuration registe */
B
blackfin architecture  
Bryan Wu 已提交
30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 
#define SIC_RVECT             		0xFFC00108	/* Interrupt Reset Vector Address Register */
#define SIC_IMASK             		0xFFC0010C	/* Interrupt Mask Register */
#define SIC_IAR0               		0xFFC00110	/* Interrupt Assignment Register 0 */
#define SIC_IAR1               		0xFFC00114	/* Interrupt Assignment Register 1 */
#define SIC_IAR2              		0xFFC00118	/* Interrupt Assignment Register 2 */
#define SIC_ISR                		0xFFC00120	/* Interrupt Status Register */
#define SIC_IWR                		0xFFC00124	/* Interrupt Wakeup Register */

/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
#define WDOG_CTL                	0xFFC00200	/* Watchdog Control Register */
#define WDOG_CNT                	0xFFC00204	/* Watchdog Count Register */
#define WDOG_STAT               	0xFFC00208	/* Watchdog Status Register */

/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
#define RTC_STAT                	0xFFC00300	/* RTC Status Register */
#define RTC_ICTL                	0xFFC00304	/* RTC Interrupt Control Register */
#define RTC_ISTAT               	0xFFC00308	/* RTC Interrupt Status Register */
#define RTC_SWCNT               	0xFFC0030C	/* RTC Stopwatch Count Register */
#define RTC_ALARM               	0xFFC00310	/* RTC Alarm Time Register */
#define RTC_FAST                	0xFFC00314	/* RTC Prescaler Enable Register */
#define RTC_PREN			0xFFC00314	/* RTC Prescaler Enable Register (alternate macro) */

/* UART Controller (0xFFC00400 - 0xFFC004FF) */
G
[Blackfin] arch: Resolve the clash issue of UART defines between blackfin...  
Graf Yang 已提交
53 54 55 56 57 58 59 60 61 62 63 64 65 66 

/*
 * Because include/linux/serial_reg.h have defined UART_*,
 * So we define blackfin uart regs to BFIN_UART_*.
 */
#define BFIN_UART_THR			0xFFC00400	/* Transmit Holding register */
#define BFIN_UART_RBR			0xFFC00400	/* Receive Buffer register */
#define BFIN_UART_DLL			0xFFC00400	/* Divisor Latch (Low-Byte) */
#define BFIN_UART_IER			0xFFC00404	/* Interrupt Enable Register */
#define BFIN_UART_DLH			0xFFC00404	/* Divisor Latch (High-Byte) */
#define BFIN_UART_IIR			0xFFC00408	/* Interrupt Identification Register */
#define BFIN_UART_LCR			0xFFC0040C	/* Line Control Register */
#define BFIN_UART_MCR			0xFFC00410	/* Modem Control Register */
#define BFIN_UART_LSR			0xFFC00414	/* Line Status Register */
B
blackfin architecture  
Bryan Wu 已提交
67 
#if 0
G
[Blackfin] arch: Resolve the clash issue of UART defines between blackfin...  
Graf Yang 已提交
68 
#define BFIN_UART_MSR			0xFFC00418	/* Modem Status Register (UNUSED in ADSP-BF532) */
B
blackfin architecture  
Bryan Wu 已提交
69 
#endif
G
[Blackfin] arch: Resolve the clash issue of UART defines between blackfin...  
Graf Yang 已提交
70 71 
#define BFIN_UART_SCR			0xFFC0041C	/* SCR Scratch Register */
#define BFIN_UART_GCTL			0xFFC00424	/* Global Control Register */
B
blackfin architecture  
Bryan Wu 已提交
72 73 

/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
B
Blackfin arch: add TWIx_REGBASE and SPIx_REGBASE to specific CPU header files,...  
Bryan Wu 已提交
74 
#define SPI0_REGBASE          		0xFFC00500
B
blackfin architecture  
Bryan Wu 已提交
75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 
#define SPI_CTL               		0xFFC00500	/* SPI Control Register */
#define SPI_FLG               		0xFFC00504	/* SPI Flag register */
#define SPI_STAT              		0xFFC00508	/* SPI Status register */
#define SPI_TDBR              		0xFFC0050C	/* SPI Transmit Data Buffer Register */
#define SPI_RDBR              		0xFFC00510	/* SPI Receive Data Buffer Register */
#define SPI_BAUD              		0xFFC00514	/* SPI Baud rate Register */
#define SPI_SHADOW            		0xFFC00518	/* SPI_RDBR Shadow Register */

/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */

#define TIMER0_CONFIG          		0xFFC00600	/* Timer 0 Configuration Register */
#define TIMER0_COUNTER			0xFFC00604	/* Timer 0 Counter Register */
#define TIMER0_PERIOD       		0xFFC00608	/* Timer 0 Period Register */
#define TIMER0_WIDTH        		0xFFC0060C	/* Timer 0 Width Register */

#define TIMER1_CONFIG          		0xFFC00610	/*  Timer 1 Configuration Register   */
#define TIMER1_COUNTER         		0xFFC00614	/*  Timer 1 Counter Register         */
#define TIMER1_PERIOD          		0xFFC00618	/*  Timer 1 Period Register          */
#define TIMER1_WIDTH           		0xFFC0061C	/*  Timer 1 Width Register           */

#define TIMER2_CONFIG          		0xFFC00620	/* Timer 2 Configuration Register   */
#define TIMER2_COUNTER         		0xFFC00624	/* Timer 2 Counter Register         */
#define TIMER2_PERIOD          		0xFFC00628	/* Timer 2 Period Register          */
#define TIMER2_WIDTH           		0xFFC0062C	/* Timer 2 Width Register           */

#define TIMER_ENABLE			0xFFC00640	/* Timer Enable Register */
#define TIMER_DISABLE			0xFFC00644	/* Timer Disable Register */
#define TIMER_STATUS			0xFFC00648	/* Timer Status Register */

/* General Purpose IO (0xFFC00700 - 0xFFC007FF) */

#define FIO_FLAG_D	       		0xFFC00700	/* Flag Mask to directly specify state of pins */
#define FIO_FLAG_C             		0xFFC00704	/* Peripheral Interrupt Flag Register (clear) */
#define FIO_FLAG_S             		0xFFC00708	/* Peripheral Interrupt Flag Register (set) */
#define FIO_FLAG_T			0xFFC0070C	/* Flag Mask to directly toggle state of pins */
#define FIO_MASKA_D            		0xFFC00710	/* Flag Mask Interrupt A Register (set directly) */
#define FIO_MASKA_C            		0xFFC00714	/* Flag Mask Interrupt A Register (clear) */
#define FIO_MASKA_S            		0xFFC00718	/* Flag Mask Interrupt A Register (set) */
#define FIO_MASKA_T            		0xFFC0071C	/* Flag Mask Interrupt A Register (toggle) */
#define FIO_MASKB_D            		0xFFC00720	/* Flag Mask Interrupt B Register (set directly) */
#define FIO_MASKB_C            		0xFFC00724	/* Flag Mask Interrupt B Register (clear) */
#define FIO_MASKB_S            		0xFFC00728	/* Flag Mask Interrupt B Register (set) */
#define FIO_MASKB_T            		0xFFC0072C	/* Flag Mask Interrupt B Register (toggle) */
#define FIO_DIR                		0xFFC00730	/* Peripheral Flag Direction Register */
#define FIO_POLAR              		0xFFC00734	/* Flag Source Polarity Register */
#define FIO_EDGE               		0xFFC00738	/* Flag Source Sensitivity Register */
#define FIO_BOTH               		0xFFC0073C	/* Flag Set on BOTH Edges Register */
#define FIO_INEN					0xFFC00740	/* Flag Input Enable Register  */

/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
#define SPORT0_TCR1     	 	0xFFC00800	/* SPORT0 Transmit Configuration 1 Register */
#define SPORT0_TCR2      	 	0xFFC00804	/* SPORT0 Transmit Configuration 2 Register */
#define SPORT0_TCLKDIV        		0xFFC00808	/* SPORT0 Transmit Clock Divider */
#define SPORT0_TFSDIV          		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider */
#define SPORT0_TX	             	0xFFC00810	/* SPORT0 TX Data Register */
#define SPORT0_RX	            	0xFFC00818	/* SPORT0 RX Data Register */
#define SPORT0_RCR1      	 	0xFFC00820	/* SPORT0 Transmit Configuration 1 Register */
#define SPORT0_RCR2      	 	0xFFC00824	/* SPORT0 Transmit Configuration 2 Register */
#define SPORT0_RCLKDIV        		0xFFC00828	/* SPORT0 Receive Clock Divider */
#define SPORT0_RFSDIV          		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider */
#define SPORT0_STAT            		0xFFC00830	/* SPORT0 Status Register */
#define SPORT0_CHNL            		0xFFC00834	/* SPORT0 Current Channel Register */
#define SPORT0_MCMC1           		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1 */
#define SPORT0_MCMC2           		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2 */
#define SPORT0_MTCS0           		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0 */
#define SPORT0_MTCS1           		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1 */
#define SPORT0_MTCS2           		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2 */
#define SPORT0_MTCS3           		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3 */
#define SPORT0_MRCS0           		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0 */
#define SPORT0_MRCS1           		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1 */
#define SPORT0_MRCS2           		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2 */
#define SPORT0_MRCS3           		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3 */

/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
#define SPORT1_TCR1     	 	0xFFC00900	/* SPORT1 Transmit Configuration 1 Register */
#define SPORT1_TCR2      	 	0xFFC00904	/* SPORT1 Transmit Configuration 2 Register */
#define SPORT1_TCLKDIV        		0xFFC00908	/* SPORT1 Transmit Clock Divider */
#define SPORT1_TFSDIV          		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider */
#define SPORT1_TX	             	0xFFC00910	/* SPORT1 TX Data Register */
#define SPORT1_RX	            	0xFFC00918	/* SPORT1 RX Data Register */
#define SPORT1_RCR1      	 	0xFFC00920	/* SPORT1 Transmit Configuration 1 Register */
#define SPORT1_RCR2      	 	0xFFC00924	/* SPORT1 Transmit Configuration 2 Register */
#define SPORT1_RCLKDIV        		0xFFC00928	/* SPORT1 Receive Clock Divider */
#define SPORT1_RFSDIV          		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider */
#define SPORT1_STAT            		0xFFC00930	/* SPORT1 Status Register */
#define SPORT1_CHNL            		0xFFC00934	/* SPORT1 Current Channel Register */
#define SPORT1_MCMC1           		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1 */
#define SPORT1_MCMC2           		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2 */
#define SPORT1_MTCS0           		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0 */
#define SPORT1_MTCS1           		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1 */
#define SPORT1_MTCS2           		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2 */
#define SPORT1_MTCS3           		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3 */
#define SPORT1_MRCS0           		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0 */
#define SPORT1_MRCS1           		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1 */
#define SPORT1_MRCS2           		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2 */
#define SPORT1_MRCS3           		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3 */

/* Asynchronous Memory Controller - External Bus Interface Unit  */
#define EBIU_AMGCTL			0xFFC00A00	/* Asynchronous Memory Global Control Register */
#define EBIU_AMBCTL0			0xFFC00A04	/* Asynchronous Memory Bank Control Register 0 */
#define EBIU_AMBCTL1			0xFFC00A08	/* Asynchronous Memory Bank Control Register 1 */

/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */

#define EBIU_SDGCTL			0xFFC00A10	/* SDRAM Global Control Register */
#define EBIU_SDBCTL			0xFFC00A14	/* SDRAM Bank Control Register */
#define EBIU_SDRRC 			0xFFC00A18	/* SDRAM Refresh Rate Control Register */
#define EBIU_SDSTAT			0xFFC00A1C	/* SDRAM Status Register */

/* DMA Traffic controls */
#define DMA_TC_PER 0xFFC00B0C	/* Traffic Control Periods Register */
#define DMA_TC_CNT 0xFFC00B10	/* Traffic Control Current Counts Register */
B
Blackfin arch: update blackfin header files to latest one in VDSP.  
Bryan Wu 已提交
188 189 190 191 
/* Alternate deprecated register names (below) provided for backwards code compatibility */
#define DMA_TCPER 0xFFC00B0C	/* Traffic Control Periods Register */
#define DMA_TCCNT 0xFFC00B10	/* Traffic Control Current Counts Register */
B
blackfin architecture  
Bryan Wu 已提交
192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 
/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
#define DMA0_CONFIG		0xFFC00C08	/* DMA Channel 0 Configuration Register */
#define DMA0_NEXT_DESC_PTR	0xFFC00C00	/* DMA Channel 0 Next Descriptor Pointer Register */
#define DMA0_START_ADDR		0xFFC00C04	/* DMA Channel 0 Start Address Register */
#define DMA0_X_COUNT		0xFFC00C10	/* DMA Channel 0 X Count Register */
#define DMA0_Y_COUNT		0xFFC00C18	/* DMA Channel 0 Y Count Register */
#define DMA0_X_MODIFY		0xFFC00C14	/* DMA Channel 0 X Modify Register */
#define DMA0_Y_MODIFY		0xFFC00C1C	/* DMA Channel 0 Y Modify Register */
#define DMA0_CURR_DESC_PTR	0xFFC00C20	/* DMA Channel 0 Current Descriptor Pointer Register */
#define DMA0_CURR_ADDR		0xFFC00C24	/* DMA Channel 0 Current Address Register */
#define DMA0_CURR_X_COUNT	0xFFC00C30	/* DMA Channel 0 Current X Count Register */
#define DMA0_CURR_Y_COUNT	0xFFC00C38	/* DMA Channel 0 Current Y Count Register */
#define DMA0_IRQ_STATUS		0xFFC00C28	/* DMA Channel 0 Interrupt/Status Register */
#define DMA0_PERIPHERAL_MAP	0xFFC00C2C	/* DMA Channel 0 Peripheral Map Register */

#define DMA1_CONFIG		0xFFC00C48	/* DMA Channel 1 Configuration Register */
#define DMA1_NEXT_DESC_PTR	0xFFC00C40	/* DMA Channel 1 Next Descriptor Pointer Register */
#define DMA1_START_ADDR		0xFFC00C44	/* DMA Channel 1 Start Address Register */
#define DMA1_X_COUNT		0xFFC00C50	/* DMA Channel 1 X Count Register */
#define DMA1_Y_COUNT		0xFFC00C58	/* DMA Channel 1 Y Count Register */
#define DMA1_X_MODIFY		0xFFC00C54	/* DMA Channel 1 X Modify Register */
#define DMA1_Y_MODIFY		0xFFC00C5C	/* DMA Channel 1 Y Modify Register */
#define DMA1_CURR_DESC_PTR	0xFFC00C60	/* DMA Channel 1 Current Descriptor Pointer Register */
#define DMA1_CURR_ADDR		0xFFC00C64	/* DMA Channel 1 Current Address Register */
#define DMA1_CURR_X_COUNT	0xFFC00C70	/* DMA Channel 1 Current X Count Register */
#define DMA1_CURR_Y_COUNT	0xFFC00C78	/* DMA Channel 1 Current Y Count Register */
#define DMA1_IRQ_STATUS		0xFFC00C68	/* DMA Channel 1 Interrupt/Status Register */
#define DMA1_PERIPHERAL_MAP	0xFFC00C6C	/* DMA Channel 1 Peripheral Map Register */

#define DMA2_CONFIG		0xFFC00C88	/* DMA Channel 2 Configuration Register */
#define DMA2_NEXT_DESC_PTR	0xFFC00C80	/* DMA Channel 2 Next Descriptor Pointer Register */
#define DMA2_START_ADDR		0xFFC00C84	/* DMA Channel 2 Start Address Register */
#define DMA2_X_COUNT		0xFFC00C90	/* DMA Channel 2 X Count Register */
#define DMA2_Y_COUNT		0xFFC00C98	/* DMA Channel 2 Y Count Register */
#define DMA2_X_MODIFY		0xFFC00C94	/* DMA Channel 2 X Modify Register */
#define DMA2_Y_MODIFY		0xFFC00C9C	/* DMA Channel 2 Y Modify Register */
#define DMA2_CURR_DESC_PTR	0xFFC00CA0	/* DMA Channel 2 Current Descriptor Pointer Register */
#define DMA2_CURR_ADDR		0xFFC00CA4	/* DMA Channel 2 Current Address Register */
#define DMA2_CURR_X_COUNT	0xFFC00CB0	/* DMA Channel 2 Current X Count Register */
#define DMA2_CURR_Y_COUNT	0xFFC00CB8	/* DMA Channel 2 Current Y Count Register */
#define DMA2_IRQ_STATUS		0xFFC00CA8	/* DMA Channel 2 Interrupt/Status Register */
#define DMA2_PERIPHERAL_MAP	0xFFC00CAC	/* DMA Channel 2 Peripheral Map Register */

#define DMA3_CONFIG		0xFFC00CC8	/* DMA Channel 3 Configuration Register */
#define DMA3_NEXT_DESC_PTR	0xFFC00CC0	/* DMA Channel 3 Next Descriptor Pointer Register */
#define DMA3_START_ADDR		0xFFC00CC4	/* DMA Channel 3 Start Address Register */
#define DMA3_X_COUNT		0xFFC00CD0	/* DMA Channel 3 X Count Register */
#define DMA3_Y_COUNT		0xFFC00CD8	/* DMA Channel 3 Y Count Register */
#define DMA3_X_MODIFY		0xFFC00CD4	/* DMA Channel 3 X Modify Register */
#define DMA3_Y_MODIFY		0xFFC00CDC	/* DMA Channel 3 Y Modify Register */
#define DMA3_CURR_DESC_PTR	0xFFC00CE0	/* DMA Channel 3 Current Descriptor Pointer Register */
#define DMA3_CURR_ADDR		0xFFC00CE4	/* DMA Channel 3 Current Address Register */
#define DMA3_CURR_X_COUNT	0xFFC00CF0	/* DMA Channel 3 Current X Count Register */
#define DMA3_CURR_Y_COUNT	0xFFC00CF8	/* DMA Channel 3 Current Y Count Register */
#define DMA3_IRQ_STATUS		0xFFC00CE8	/* DMA Channel 3 Interrupt/Status Register */
#define DMA3_PERIPHERAL_MAP	0xFFC00CEC	/* DMA Channel 3 Peripheral Map Register */

#define DMA4_CONFIG		0xFFC00D08	/* DMA Channel 4 Configuration Register */
#define DMA4_NEXT_DESC_PTR	0xFFC00D00	/* DMA Channel 4 Next Descriptor Pointer Register */
#define DMA4_START_ADDR		0xFFC00D04	/* DMA Channel 4 Start Address Register */
#define DMA4_X_COUNT		0xFFC00D10	/* DMA Channel 4 X Count Register */
#define DMA4_Y_COUNT		0xFFC00D18	/* DMA Channel 4 Y Count Register */
#define DMA4_X_MODIFY		0xFFC00D14	/* DMA Channel 4 X Modify Register */
#define DMA4_Y_MODIFY		0xFFC00D1C	/* DMA Channel 4 Y Modify Register */
#define DMA4_CURR_DESC_PTR	0xFFC00D20	/* DMA Channel 4 Current Descriptor Pointer Register */
#define DMA4_CURR_ADDR		0xFFC00D24	/* DMA Channel 4 Current Address Register */
#define DMA4_CURR_X_COUNT	0xFFC00D30	/* DMA Channel 4 Current X Count Register */
#define DMA4_CURR_Y_COUNT	0xFFC00D38	/* DMA Channel 4 Current Y Count Register */
#define DMA4_IRQ_STATUS		0xFFC00D28	/* DMA Channel 4 Interrupt/Status Register */
#define DMA4_PERIPHERAL_MAP	0xFFC00D2C	/* DMA Channel 4 Peripheral Map Register */

#define DMA5_CONFIG		0xFFC00D48	/* DMA Channel 5 Configuration Register */
#define DMA5_NEXT_DESC_PTR	0xFFC00D40	/* DMA Channel 5 Next Descriptor Pointer Register */
#define DMA5_START_ADDR		0xFFC00D44	/* DMA Channel 5 Start Address Register */
#define DMA5_X_COUNT		0xFFC00D50	/* DMA Channel 5 X Count Register */
#define DMA5_Y_COUNT		0xFFC00D58	/* DMA Channel 5 Y Count Register */
#define DMA5_X_MODIFY		0xFFC00D54	/* DMA Channel 5 X Modify Register */
#define DMA5_Y_MODIFY		0xFFC00D5C	/* DMA Channel 5 Y Modify Register */
#define DMA5_CURR_DESC_PTR	0xFFC00D60	/* DMA Channel 5 Current Descriptor Pointer Register */
#define DMA5_CURR_ADDR		0xFFC00D64	/* DMA Channel 5 Current Address Register */
#define DMA5_CURR_X_COUNT	0xFFC00D70	/* DMA Channel 5 Current X Count Register */
#define DMA5_CURR_Y_COUNT	0xFFC00D78	/* DMA Channel 5 Current Y Count Register */
#define DMA5_IRQ_STATUS		0xFFC00D68	/* DMA Channel 5 Interrupt/Status Register */
#define DMA5_PERIPHERAL_MAP	0xFFC00D6C	/* DMA Channel 5 Peripheral Map Register */

#define DMA6_CONFIG		0xFFC00D88	/* DMA Channel 6 Configuration Register */
#define DMA6_NEXT_DESC_PTR	0xFFC00D80	/* DMA Channel 6 Next Descriptor Pointer Register */
#define DMA6_START_ADDR		0xFFC00D84	/* DMA Channel 6 Start Address Register */
#define DMA6_X_COUNT		0xFFC00D90	/* DMA Channel 6 X Count Register */
#define DMA6_Y_COUNT		0xFFC00D98	/* DMA Channel 6 Y Count Register */
#define DMA6_X_MODIFY		0xFFC00D94	/* DMA Channel 6 X Modify Register */
#define DMA6_Y_MODIFY		0xFFC00D9C	/* DMA Channel 6 Y Modify Register */
#define DMA6_CURR_DESC_PTR	0xFFC00DA0	/* DMA Channel 6 Current Descriptor Pointer Register */
#define DMA6_CURR_ADDR		0xFFC00DA4	/* DMA Channel 6 Current Address Register */
#define DMA6_CURR_X_COUNT	0xFFC00DB0	/* DMA Channel 6 Current X Count Register */
#define DMA6_CURR_Y_COUNT	0xFFC00DB8	/* DMA Channel 6 Current Y Count Register */
#define DMA6_IRQ_STATUS		0xFFC00DA8	/* DMA Channel 6 Interrupt/Status Register */
#define DMA6_PERIPHERAL_MAP	0xFFC00DAC	/* DMA Channel 6 Peripheral Map Register */

#define DMA7_CONFIG		0xFFC00DC8	/* DMA Channel 7 Configuration Register */
#define DMA7_NEXT_DESC_PTR	0xFFC00DC0	/* DMA Channel 7 Next Descriptor Pointer Register */
#define DMA7_START_ADDR		0xFFC00DC4	/* DMA Channel 7 Start Address Register */
#define DMA7_X_COUNT		0xFFC00DD0	/* DMA Channel 7 X Count Register */
#define DMA7_Y_COUNT		0xFFC00DD8	/* DMA Channel 7 Y Count Register */
#define DMA7_X_MODIFY		0xFFC00DD4	/* DMA Channel 7 X Modify Register */
#define DMA7_Y_MODIFY		0xFFC00DDC	/* DMA Channel 7 Y Modify Register */
#define DMA7_CURR_DESC_PTR	0xFFC00DE0	/* DMA Channel 7 Current Descriptor Pointer Register */
#define DMA7_CURR_ADDR		0xFFC00DE4	/* DMA Channel 7 Current Address Register */
#define DMA7_CURR_X_COUNT	0xFFC00DF0	/* DMA Channel 7 Current X Count Register */
#define DMA7_CURR_Y_COUNT	0xFFC00DF8	/* DMA Channel 7 Current Y Count Register */
#define DMA7_IRQ_STATUS		0xFFC00DE8	/* DMA Channel 7 Interrupt/Status Register */
#define DMA7_PERIPHERAL_MAP	0xFFC00DEC	/* DMA Channel 7 Peripheral Map Register */

#define MDMA_D1_CONFIG		0xFFC00E88	/* MemDMA Stream 1 Destination Configuration Register */
#define MDMA_D1_NEXT_DESC_PTR	0xFFC00E80	/* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
#define MDMA_D1_START_ADDR	0xFFC00E84	/* MemDMA Stream 1 Destination Start Address Register */
#define MDMA_D1_X_COUNT		0xFFC00E90	/* MemDMA Stream 1 Destination X Count Register */
#define MDMA_D1_Y_COUNT		0xFFC00E98	/* MemDMA Stream 1 Destination Y Count Register */
#define MDMA_D1_X_MODIFY	0xFFC00E94	/* MemDMA Stream 1 Destination X Modify Register */
#define MDMA_D1_Y_MODIFY	0xFFC00E9C	/* MemDMA Stream 1 Destination Y Modify Register */
#define MDMA_D1_CURR_DESC_PTR	0xFFC00EA0	/* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
#define MDMA_D1_CURR_ADDR	0xFFC00EA4	/* MemDMA Stream 1 Destination Current Address Register */
#define MDMA_D1_CURR_X_COUNT	0xFFC00EB0	/* MemDMA Stream 1 Destination Current X Count Register */
#define MDMA_D1_CURR_Y_COUNT	0xFFC00EB8	/* MemDMA Stream 1 Destination Current Y Count Register */
#define MDMA_D1_IRQ_STATUS	0xFFC00EA8	/* MemDMA Stream 1 Destination Interrupt/Status Register */
#define MDMA_D1_PERIPHERAL_MAP	0xFFC00EAC	/* MemDMA Stream 1 Destination Peripheral Map Register */

#define MDMA_S1_CONFIG		0xFFC00EC8	/* MemDMA Stream 1 Source Configuration Register */
#define MDMA_S1_NEXT_DESC_PTR	0xFFC00EC0	/* MemDMA Stream 1 Source Next Descriptor Pointer Register */
#define MDMA_S1_START_ADDR	0xFFC00EC4	/* MemDMA Stream 1 Source Start Address Register */
#define MDMA_S1_X_COUNT		0xFFC00ED0	/* MemDMA Stream 1 Source X Count Register */
#define MDMA_S1_Y_COUNT		0xFFC00ED8	/* MemDMA Stream 1 Source Y Count Register */
#define MDMA_S1_X_MODIFY	0xFFC00ED4	/* MemDMA Stream 1 Source X Modify Register */
#define MDMA_S1_Y_MODIFY	0xFFC00EDC	/* MemDMA Stream 1 Source Y Modify Register */
#define MDMA_S1_CURR_DESC_PTR	0xFFC00EE0	/* MemDMA Stream 1 Source Current Descriptor Pointer Register */
#define MDMA_S1_CURR_ADDR	0xFFC00EE4	/* MemDMA Stream 1 Source Current Address Register */
#define MDMA_S1_CURR_X_COUNT	0xFFC00EF0	/* MemDMA Stream 1 Source Current X Count Register */
#define MDMA_S1_CURR_Y_COUNT	0xFFC00EF8	/* MemDMA Stream 1 Source Current Y Count Register */
#define MDMA_S1_IRQ_STATUS	0xFFC00EE8	/* MemDMA Stream 1 Source Interrupt/Status Register */
#define MDMA_S1_PERIPHERAL_MAP	0xFFC00EEC	/* MemDMA Stream 1 Source Peripheral Map Register */

#define MDMA_D0_CONFIG		0xFFC00E08	/* MemDMA Stream 0 Destination Configuration Register */
#define MDMA_D0_NEXT_DESC_PTR	0xFFC00E00	/* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
#define MDMA_D0_START_ADDR	0xFFC00E04	/* MemDMA Stream 0 Destination Start Address Register */
#define MDMA_D0_X_COUNT		0xFFC00E10	/* MemDMA Stream 0 Destination X Count Register */
#define MDMA_D0_Y_COUNT		0xFFC00E18	/* MemDMA Stream 0 Destination Y Count Register */
#define MDMA_D0_X_MODIFY	0xFFC00E14	/* MemDMA Stream 0 Destination X Modify Register */
#define MDMA_D0_Y_MODIFY	0xFFC00E1C	/* MemDMA Stream 0 Destination Y Modify Register */
#define MDMA_D0_CURR_DESC_PTR	0xFFC00E20	/* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
#define MDMA_D0_CURR_ADDR	0xFFC00E24	/* MemDMA Stream 0 Destination Current Address Register */
#define MDMA_D0_CURR_X_COUNT	0xFFC00E30	/* MemDMA Stream 0 Destination Current X Count Register */
#define MDMA_D0_CURR_Y_COUNT	0xFFC00E38	/* MemDMA Stream 0 Destination Current Y Count Register */
#define MDMA_D0_IRQ_STATUS	0xFFC00E28	/* MemDMA Stream 0 Destination Interrupt/Status Register */
#define MDMA_D0_PERIPHERAL_MAP	0xFFC00E2C	/* MemDMA Stream 0 Destination Peripheral Map Register */

#define MDMA_S0_CONFIG		0xFFC00E48	/* MemDMA Stream 0 Source Configuration Register */
#define MDMA_S0_NEXT_DESC_PTR	0xFFC00E40	/* MemDMA Stream 0 Source Next Descriptor Pointer Register */
#define MDMA_S0_START_ADDR	0xFFC00E44	/* MemDMA Stream 0 Source Start Address Register */
#define MDMA_S0_X_COUNT		0xFFC00E50	/* MemDMA Stream 0 Source X Count Register */
#define MDMA_S0_Y_COUNT		0xFFC00E58	/* MemDMA Stream 0 Source Y Count Register */
#define MDMA_S0_X_MODIFY	0xFFC00E54	/* MemDMA Stream 0 Source X Modify Register */
#define MDMA_S0_Y_MODIFY	0xFFC00E5C	/* MemDMA Stream 0 Source Y Modify Register */
#define MDMA_S0_CURR_DESC_PTR	0xFFC00E60	/* MemDMA Stream 0 Source Current Descriptor Pointer Register */
#define MDMA_S0_CURR_ADDR	0xFFC00E64	/* MemDMA Stream 0 Source Current Address Register */
#define MDMA_S0_CURR_X_COUNT	0xFFC00E70	/* MemDMA Stream 0 Source Current X Count Register */
#define MDMA_S0_CURR_Y_COUNT	0xFFC00E78	/* MemDMA Stream 0 Source Current Y Count Register */
#define MDMA_S0_IRQ_STATUS	0xFFC00E68	/* MemDMA Stream 0 Source Interrupt/Status Register */
#define MDMA_S0_PERIPHERAL_MAP	0xFFC00E6C	/* MemDMA Stream 0 Source Peripheral Map Register */

/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */

#define PPI_CONTROL			0xFFC01000	/* PPI Control Register */
#define PPI_STATUS			0xFFC01004	/* PPI Status Register */
#define PPI_COUNT			0xFFC01008	/* PPI Transfer Count Register */
#define PPI_DELAY			0xFFC0100C	/* PPI Delay Count Register */
#define PPI_FRAME			0xFFC01010	/* PPI Frame Length Register */

/*********************************************************************************** */
/* System MMR Register Bits */
/******************************************************************************* */

/* CHIPID Masks */
#define CHIPID_VERSION         0xF0000000
#define CHIPID_FAMILY          0x0FFFF000
#define CHIPID_MANUFACTURE     0x00000FFE

/* SWRST Mask */
B
Blackfin arch: update blackfin header files to latest one in VDSP.  
Bryan Wu 已提交
379 380 381 382 383 384 385 386 387 
#define SYSTEM_RESET	0x0007	/* Initiates A System Software Reset			*/
#define	DOUBLE_FAULT	0x0008	/* Core Double Fault Causes Reset				*/
#define RESET_DOUBLE	0x2000	/* SW Reset Generated By Core Double-Fault		*/
#define RESET_WDOG	0x4000	/* SW Reset Generated By Watchdog Timer			*/
#define RESET_SOFTWARE	0x8000	/* SW Reset Occurred Since Last Read Of SWRST	*/

/* SYSCR Masks																				*/
#define BMODE			0x0006	/* Boot Mode - Latched During HW Reset From Mode Pins	*/
#define	NOBOOT			0x0010	/* Execute From L1 or ASYNC Bank 0 When BMODE = 0		*/
B
blackfin architecture  
Bryan Wu 已提交
388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 

/* *************  SYSTEM INTERRUPT CONTROLLER MASKS ***************** */

    /* SIC_IAR0 Masks */

#define P0_IVG(x)    ((x)-7)	/* Peripheral #0 assigned IVG #x  */
#define P1_IVG(x)    ((x)-7) << 0x4	/* Peripheral #1 assigned IVG #x  */
#define P2_IVG(x)    ((x)-7) << 0x8	/* Peripheral #2 assigned IVG #x  */
#define P3_IVG(x)    ((x)-7) << 0xC	/* Peripheral #3 assigned IVG #x  */
#define P4_IVG(x)    ((x)-7) << 0x10	/* Peripheral #4 assigned IVG #x  */
#define P5_IVG(x)    ((x)-7) << 0x14	/* Peripheral #5 assigned IVG #x  */
#define P6_IVG(x)    ((x)-7) << 0x18	/* Peripheral #6 assigned IVG #x  */
#define P7_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #7 assigned IVG #x  */

/* SIC_IAR1 Masks */

#define P8_IVG(x)     ((x)-7)	/* Peripheral #8 assigned IVG #x  */
#define P9_IVG(x)     ((x)-7) << 0x4	/* Peripheral #9 assigned IVG #x  */
#define P10_IVG(x)    ((x)-7) << 0x8	/* Peripheral #10 assigned IVG #x  */
#define P11_IVG(x)    ((x)-7) << 0xC	/* Peripheral #11 assigned IVG #x  */
#define P12_IVG(x)    ((x)-7) << 0x10	/* Peripheral #12 assigned IVG #x  */
#define P13_IVG(x)    ((x)-7) << 0x14	/* Peripheral #13 assigned IVG #x  */
#define P14_IVG(x)    ((x)-7) << 0x18	/* Peripheral #14 assigned IVG #x  */
#define P15_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #15 assigned IVG #x  */

/* SIC_IAR2 Masks */
#define P16_IVG(x)    ((x)-7)	/* Peripheral #16 assigned IVG #x  */
#define P17_IVG(x)    ((x)-7) << 0x4	/* Peripheral #17 assigned IVG #x  */
#define P18_IVG(x)    ((x)-7) << 0x8	/* Peripheral #18 assigned IVG #x  */
#define P19_IVG(x)    ((x)-7) << 0xC	/* Peripheral #19 assigned IVG #x  */
#define P20_IVG(x)    ((x)-7) << 0x10	/* Peripheral #20 assigned IVG #x  */
#define P21_IVG(x)    ((x)-7) << 0x14	/* Peripheral #21 assigned IVG #x  */
#define P22_IVG(x)    ((x)-7) << 0x18	/* Peripheral #22 assigned IVG #x  */
#define P23_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #23 assigned IVG #x  */

/* SIC_IMASK Masks */
#define SIC_UNMASK_ALL         0x00000000	/* Unmask all peripheral interrupts */
#define SIC_MASK_ALL           0xFFFFFFFF	/* Mask all peripheral interrupts */
#define SIC_MASK(x)	       (1 << (x))	/* Mask Peripheral #x interrupt */
#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x)))	/* Unmask Peripheral #x interrupt */

/* SIC_IWR Masks */
#define IWR_DISABLE_ALL        0x00000000	/* Wakeup Disable all peripherals */
#define IWR_ENABLE_ALL         0xFFFFFFFF	/* Wakeup Enable all peripherals */
#define IWR_ENABLE(x)	       (1 << (x))	/* Wakeup Enable Peripheral #x */
#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x)))	/* Wakeup Disable Peripheral #x */

/* ***************************** UART CONTROLLER MASKS ********************** */

/* UART_LCR Register */

#define DLAB	0x80
#define SB      0x40
#define STP      0x20
#define EPS     0x10
#define PEN	0x08
#define STB	0x04
#define WLS(x)	((x-5) & 0x03)

#define DLAB_P	0x07
#define SB_P	0x06
#define STP_P	0x05
#define EPS_P	0x04
#define PEN_P	0x03
#define STB_P	0x02
#define WLS_P1	0x01
#define WLS_P0	0x00

/* UART_MCR Register */
#define LOOP_ENA	0x10
#define LOOP_ENA_P	0x04

/* UART_LSR Register */
#define TEMT	0x40
#define THRE	0x20
#define BI	0x10
#define FE	0x08
#define PE	0x04
#define OE	0x02
#define DR	0x01

#define TEMP_P	0x06
#define THRE_P	0x05
#define BI_P	0x04
#define FE_P	0x03
#define PE_P	0x02
#define OE_P	0x01
#define DR_P	0x00

/* UART_IER Register */
#define ELSI	0x04
#define ETBEI	0x02
#define ERBFI	0x01

#define ELSI_P	0x02
#define ETBEI_P	0x01
#define ERBFI_P	0x00

/* UART_IIR Register */
#define STATUS(x)	((x << 1) & 0x06)
#define NINT		0x01
#define STATUS_P1	0x02
#define STATUS_P0	0x01
#define NINT_P		0x00
#define IIR_TX_READY    0x02	/* UART_THR empty                               */
#define IIR_RX_READY    0x04	/* Receive data ready                           */
#define IIR_LINE_CHANGE 0x06	/* Receive line status                          */
#define IIR_STATUS	0x06

/* UART_GCTL Register */
#define FFE	0x20
#define FPE	0x10
#define RPOLC	0x08
#define TPOLC	0x04
#define IREN	0x02
#define UCEN	0x01

#define FFE_P	0x05
#define FPE_P	0x04
#define RPOLC_P	0x03
#define TPOLC_P	0x02
#define IREN_P	0x01
#define UCEN_P	0x00

/*  *********  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************   */

/*  PPI_CONTROL Masks         */
#define PORT_EN              0x00000001	/* PPI Port Enable  */
#define PORT_DIR             0x00000002	/* PPI Port Direction       */
#define XFR_TYPE             0x0000000C	/* PPI Transfer Type  */
#define PORT_CFG             0x00000030	/* PPI Port Configuration */
#define FLD_SEL              0x00000040	/* PPI Active Field Select */
#define PACK_EN              0x00000080	/* PPI Packing Mode */
#define DMA32                0x00000100	/* PPI 32-bit DMA Enable */
#define SKIP_EN              0x00000200	/* PPI Skip Element Enable */
#define SKIP_EO              0x00000400	/* PPI Skip Even/Odd Elements */
#define DLENGTH              0x00003800	/* PPI Data Length  */
#define DLEN_8			0x0000	/* Data Length = 8 Bits                         */
#define DLEN_10			0x0800	/* Data Length = 10 Bits                        */
#define DLEN_11			0x1000	/* Data Length = 11 Bits                        */
#define DLEN_12			0x1800	/* Data Length = 12 Bits                        */
#define DLEN_13			0x2000	/* Data Length = 13 Bits                        */
#define DLEN_14			0x2800	/* Data Length = 14 Bits                        */
#define DLEN_15			0x3000	/* Data Length = 15 Bits                        */
#define DLEN_16			0x3800	/* Data Length = 16 Bits                        */
#define DLEN(x)	(((x-9) & 0x07) << 11)	/* PPI Data Length (only works for x=10-->x=16) */
#define POL                  0x0000C000	/* PPI Signal Polarities       */
B
Blackfin arch: update blackfin header files to latest one in VDSP.  
Bryan Wu 已提交
535 536 
#define POLC		0x4000		/* PPI Clock Polarity				*/
#define POLS		0x8000		/* PPI Frame Sync Polarity			*/
B
blackfin architecture  
Bryan Wu 已提交
537 538 539 540 541 542 543 544 545 546 547 

/* PPI_STATUS Masks                                          */
#define FLD	             0x00000400	/* Field Indicator   */
#define FT_ERR	             0x00000800	/* Frame Track Error */
#define OVR	             0x00001000	/* FIFO Overflow Error */
#define UNDR	             0x00002000	/* FIFO Underrun Error */
#define ERR_DET	      	     0x00004000	/* Error Detected Indicator */
#define ERR_NCOR	     0x00008000	/* Error Not Corrected Indicator */

/* **********  DMA CONTROLLER MASKS  *********************8 */
M
Blackfin: unify DMA masks  
Mike Frysinger 已提交
548 
/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
B
blackfin architecture  
Bryan Wu 已提交
549 550 551 552 553 554 555 556 557 558 

#define CTYPE	            0x00000040	/* DMA Channel Type Indicator */
#define CTYPE_P             6	/* DMA Channel Type Indicator BIT POSITION */
#define PCAP8	            0x00000080	/* DMA 8-bit Operation Indicator   */
#define PCAP16	            0x00000100	/* DMA 16-bit Operation Indicator */
#define PCAP32	            0x00000200	/* DMA 32-bit Operation Indicator */
#define PCAPWR	            0x00000400	/* DMA Write Operation Indicator */
#define PCAPRD	            0x00000800	/* DMA Read Operation Indicator */
#define PMAP	            0x00007000	/* DMA Peripheral Map Field */
B
Blackfin arch: update blackfin header files to latest one in VDSP.  
Bryan Wu 已提交
559 560 561 562 563 564 565 566 567 
#define PMAP_PPI		0x0000	/* PMAP PPI Port DMA */
#define	PMAP_SPORT0RX		0x1000	/* PMAP SPORT0 Receive DMA */
#define PMAP_SPORT0TX		0x2000	/* PMAP SPORT0 Transmit DMA */
#define	PMAP_SPORT1RX		0x3000	/* PMAP SPORT1 Receive DMA */
#define PMAP_SPORT1TX		0x4000	/* PMAP SPORT1 Transmit DMA */
#define PMAP_SPI		0x5000	/* PMAP SPI DMA */
#define PMAP_UARTRX		0x6000	/* PMAP UART Receive DMA */
#define PMAP_UARTTX		0x7000	/* PMAP UART Transmit DMA */
B
blackfin architecture  
Bryan Wu 已提交
568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 
/*  *************  GENERAL PURPOSE TIMER MASKS  ******************** */

/* PWM Timer bit definitions */

/* TIMER_ENABLE Register */
#define TIMEN0	0x0001
#define TIMEN1	0x0002
#define TIMEN2	0x0004

#define TIMEN0_P	0x00
#define TIMEN1_P	0x01
#define TIMEN2_P	0x02

/* TIMER_DISABLE Register */
#define TIMDIS0	0x0001
#define TIMDIS1	0x0002
#define TIMDIS2	0x0004

#define TIMDIS0_P	0x00
#define TIMDIS1_P	0x01
#define TIMDIS2_P	0x02

/* TIMER_STATUS Register */
#define TIMIL0		0x0001
#define TIMIL1		0x0002
#define TIMIL2		0x0004
B
Blackfin arch: update blackfin header files to latest one in VDSP.  
Bryan Wu 已提交
594 595 596 
#define TOVF_ERR0		0x0010	/* Timer 0 Counter Overflow		*/
#define TOVF_ERR1		0x0020	/* Timer 1 Counter Overflow		*/
#define TOVF_ERR2		0x0040	/* Timer 2 Counter Overflow		*/
B
blackfin architecture  
Bryan Wu 已提交
597 598 599 600 601 602 603 
#define TRUN0		0x1000
#define TRUN1		0x2000
#define TRUN2		0x4000

#define TIMIL0_P	0x00
#define TIMIL1_P	0x01
#define TIMIL2_P	0x02
B
Blackfin arch: update blackfin header files to latest one in VDSP.  
Bryan Wu 已提交
604 605 606 
#define TOVF_ERR0_P		0x04
#define TOVF_ERR1_P		0x05
#define TOVF_ERR2_P		0x06
B
blackfin architecture  
Bryan Wu 已提交
607 608 609 610 
#define TRUN0_P		0x0C
#define TRUN1_P		0x0D
#define TRUN2_P		0x0E
B
Blackfin arch: update blackfin header files to latest one in VDSP.  
Bryan Wu 已提交
611 612 613 614 615 616 617 618 
/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
#define TOVL_ERR0 		TOVF_ERR0
#define TOVL_ERR1 		TOVF_ERR1
#define TOVL_ERR2 		TOVF_ERR2
#define TOVL_ERR0_P		TOVF_ERR0_P
#define TOVL_ERR1_P 		TOVF_ERR1_P
#define TOVL_ERR2_P 		TOVF_ERR2_P
B
blackfin architecture  
Bryan Wu 已提交
619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 
/* TIMERx_CONFIG Registers */
#define PWM_OUT		0x0001
#define WDTH_CAP	0x0002
#define EXT_CLK		0x0003
#define PULSE_HI	0x0004
#define PERIOD_CNT	0x0008
#define IRQ_ENA		0x0010
#define TIN_SEL		0x0020
#define OUT_DIS		0x0040
#define CLK_SEL		0x0080
#define TOGGLE_HI	0x0100
#define EMU_RUN		0x0200
#define ERR_TYP(x)	((x & 0x03) << 14)

#define TMODE_P0		0x00
#define TMODE_P1		0x01
#define PULSE_HI_P		0x02
#define PERIOD_CNT_P		0x03
#define IRQ_ENA_P		0x04
#define TIN_SEL_P		0x05
#define OUT_DIS_P		0x06
#define CLK_SEL_P		0x07
#define TOGGLE_HI_P		0x08
#define EMU_RUN_P		0x09
#define ERR_TYP_P0		0x0E
#define ERR_TYP_P1		0x0F

/*/ ******************   PROGRAMMABLE FLAG MASKS  ********************* */

/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  Masks */
#define PF0         0x0001
#define PF1         0x0002
#define PF2         0x0004
#define PF3         0x0008
#define PF4         0x0010
#define PF5         0x0020
#define PF6         0x0040
#define PF7         0x0080
#define PF8         0x0100
#define PF9         0x0200
#define PF10        0x0400
#define PF11        0x0800
#define PF12        0x1000
#define PF13        0x2000
#define PF14        0x4000
#define PF15        0x8000

/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  BIT POSITIONS */
#define PF0_P         0
#define PF1_P         1
#define PF2_P         2
#define PF3_P         3
#define PF4_P         4
#define PF5_P         5
#define PF6_P         6
#define PF7_P         7
#define PF8_P         8
#define PF9_P         9
#define PF10_P        10
#define PF11_P        11
#define PF12_P        12
#define PF13_P        13
#define PF14_P        14
#define PF15_P        15

/* ***********  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  **************** */

/* SPI_CTL Masks */
#define TIMOD                  0x00000003	/* Transfer initiation mode and interrupt generation */
B
Blackfin arch: update blackfin header files to latest one in VDSP.  
Bryan Wu 已提交
688 689 690 691 
#define RDBR_CORE	0x0000		/* 		RDBR Read Initiates, IRQ When RDBR Full		*/
#define	TDBR_CORE	0x0001		/* 		TDBR Write Initiates, IRQ When TDBR Empty	*/
#define RDBR_DMA	0x0002		/* 		DMA Read, DMA Until FIFO Empty				*/
#define TDBR_DMA	0x0003		/* 		DMA Write, DMA Until FIFO Full				*/
B
blackfin architecture  
Bryan Wu 已提交
692 693 694 695 
#define SZ                     0x00000004	/* Send Zero (=0) or last (=1) word when TDBR empty. */
#define GM                     0x00000008	/* When RDBR full, get more (=1) data or discard (=0) incoming Data */
#define PSSE                   0x00000010	/* Enable (=1) Slave-Select input for Master. */
#define EMISO                  0x00000020	/* Enable (=1) MISO pin as an output. */
M
Blackfin arch: all our other ports call this SIZE rather than SPI_LEN  
Mike Frysinger 已提交
696 
#define SIZE                   0x00000100	/* Word length (0 => 8 bits, 1 => 16 bits) */
B
blackfin architecture  
Bryan Wu 已提交
697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 
#define LSBF                   0x00000200	/* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
#define CPHA                   0x00000400	/* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */
#define CPOL                   0x00000800	/* Clock polarity (0 => active-high, 1 => active-low) */
#define MSTR                   0x00001000	/* Configures SPI as master (=1) or slave (=0) */
#define WOM                    0x00002000	/* Open drain (=1) data output enable (for MOSI and MISO) */
#define SPE                    0x00004000	/* SPI module enable (=1), disable (=0) */

/* SPI_FLG Masks */
#define FLS1                   0x00000002	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLS2                   0x00000004	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLS3                   0x00000008	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLS4                   0x00000010	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLS5                   0x00000020	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLS6                   0x00000040	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLS7                   0x00000080	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
#define FLG1                   0x00000200	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
#define FLG2                   0x00000400	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLG3                   0x00000800	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
#define FLG4                   0x00001000	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
#define FLG5                   0x00002000	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
#define FLG6                   0x00004000	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
#define FLG7                   0x00008000	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */

/* SPI_FLG Bit Positions */
#define FLS1_P                 0x00000001	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
#define FLS2_P                 0x00000002	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLS3_P                 0x00000003	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
#define FLS4_P                 0x00000004	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
#define FLS5_P                 0x00000005	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
#define FLS6_P                 0x00000006	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
#define FLS7_P                 0x00000007	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
#define FLG1_P                 0x00000009	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
#define FLG2_P                 0x0000000A	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
#define FLG3_P                 0x0000000B	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
#define FLG4_P                 0x0000000C	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
#define FLG5_P                 0x0000000D	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
#define FLG6_P                 0x0000000E	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
#define FLG7_P                 0x0000000F	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */

/* SPI_STAT Masks */
#define SPIF                   0x00000001	/* Set (=1) when SPI single-word transfer complete */
#define MODF                   0x00000002	/* Set (=1) in a master device when some other device tries to become master */
#define TXE                    0x00000004	/* Set (=1) when transmission occurs with no new data in SPI_TDBR */
#define TXS                    0x00000008	/* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
#define RBSY                   0x00000010	/* Set (=1) when data is received with RDBR full */
#define RXS                    0x00000020	/* SPI_RDBR Data Buffer Status (0=Empty, 1=Full)  */
#define TXCOL                  0x00000040	/* When set (=1), corrupt data may have been transmitted  */
B
Blackfin arch: update blackfin header files to latest one in VDSP.  
Bryan Wu 已提交
745 746 747 748 749 750 751 752 753 
/* SPIx_FLG Masks																	*/
#define FLG1E	0xFDFF		/* Activates SPI_FLOUT1 							*/
#define FLG2E	0xFBFF		/* Activates SPI_FLOUT2								*/
#define FLG3E	0xF7FF		/* Activates SPI_FLOUT3								*/
#define FLG4E	0xEFFF		/* Activates SPI_FLOUT4								*/
#define FLG5E	0xDFFF		/* Activates SPI_FLOUT5								*/
#define FLG6E	0xBFFF		/* Activates SPI_FLOUT6								*/
#define FLG7E	0x7FFF		/* Activates SPI_FLOUT7								*/
B
blackfin architecture  
Bryan Wu 已提交
754 755 756 757 
/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  ************* */

/* AMGCTL Masks */
#define AMCKEN			0x00000001	/* Enable CLKOUT */
B
Blackfin arch: update blackfin header files to latest one in VDSP.  
Bryan Wu 已提交
758 
#define	AMBEN_NONE		0x00000000	/* All Banks Disabled								*/
B
blackfin architecture  
Bryan Wu 已提交
759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 
#define AMBEN_B0		0x00000002	/* Enable Asynchronous Memory Bank 0 only */
#define AMBEN_B0_B1		0x00000004	/* Enable Asynchronous Memory Banks 0 & 1 only */
#define AMBEN_B0_B1_B2		0x00000006	/* Enable Asynchronous Memory Banks 0, 1, and 2 */
#define AMBEN_ALL		0x00000008	/* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */

/* AMGCTL Bit Positions */
#define AMCKEN_P		0x00000000	/* Enable CLKOUT */
#define AMBEN_P0		0x00000001	/* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
#define AMBEN_P1		0x00000002	/* Asynchronous Memory Enable, 010 - banks 0&1 enabled,  011 - banks 0-3 enabled */
#define AMBEN_P2		0x00000003	/* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */

/* AMBCTL0 Masks */
#define B0RDYEN	0x00000001	/* Bank 0 RDY Enable, 0=disable, 1=enable */
#define B0RDYPOL 0x00000002	/* Bank 0 RDY Active high, 0=active low, 1=active high */
#define B0TT_1	0x00000004	/* Bank 0 Transition Time from Read to Write = 1 cycle */
#define B0TT_2	0x00000008	/* Bank 0 Transition Time from Read to Write = 2 cycles */
#define B0TT_3	0x0000000C	/* Bank 0 Transition Time from Read to Write = 3 cycles */
#define B0TT_4	0x00000000	/* Bank 0 Transition Time from Read to Write = 4 cycles */
#define B0ST_1	0x00000010	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
#define B0ST_2	0x00000020	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
#define B0ST_3	0x00000030	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
#define B0ST_4	0x00000000	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
#define B0HT_1	0x00000040	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
#define B0HT_2	0x00000080	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
#define B0HT_3	0x000000C0	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
#define B0HT_0	0x00000000	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
#define B0RAT_1			0x00000100	/* Bank 0 Read Access Time = 1 cycle */
#define B0RAT_2			0x00000200	/* Bank 0 Read Access Time = 2 cycles */
#define B0RAT_3			0x00000300	/* Bank 0 Read Access Time = 3 cycles */
#define B0RAT_4			0x00000400	/* Bank 0 Read Access Time = 4 cycles */
#define B0RAT_5			0x00000500	/* Bank 0 Read Access Time = 5 cycles */
#define B0RAT_6			0x00000600	/* Bank 0 Read Access Time = 6 cycles */
#define B0RAT_7			0x00000700	/* Bank 0 Read Access Time = 7 cycles */
#define B0RAT_8			0x00000800	/* Bank 0 Read Access Time = 8 cycles */
#define B0RAT_9			0x00000900	/* Bank 0 Read Access Time = 9 cycles */
#define B0RAT_10		0x00000A00	/* Bank 0 Read Access Time = 10 cycles */
#define B0RAT_11		0x00000B00	/* Bank 0 Read Access Time = 11 cycles */
#define B0RAT_12		0x00000C00	/* Bank 0 Read Access Time = 12 cycles */
#define B0RAT_13		0x00000D00	/* Bank 0 Read Access Time = 13 cycles */
#define B0RAT_14		0x00000E00	/* Bank 0 Read Access Time = 14 cycles */
#define B0RAT_15		0x00000F00	/* Bank 0 Read Access Time = 15 cycles */
#define B0WAT_1			0x00001000	/* Bank 0 Write Access Time = 1 cycle */
#define B0WAT_2			0x00002000	/* Bank 0 Write Access Time = 2 cycles */
#define B0WAT_3			0x00003000	/* Bank 0 Write Access Time = 3 cycles */
#define B0WAT_4			0x00004000	/* Bank 0 Write Access Time = 4 cycles */
#define B0WAT_5			0x00005000	/* Bank 0 Write Access Time = 5 cycles */
#define B0WAT_6			0x00006000	/* Bank 0 Write Access Time = 6 cycles */
#define B0WAT_7			0x00007000	/* Bank 0 Write Access Time = 7 cycles */
#define B0WAT_8			0x00008000	/* Bank 0 Write Access Time = 8 cycles */
#define B0WAT_9			0x00009000	/* Bank 0 Write Access Time = 9 cycles */
#define B0WAT_10		0x0000A000	/* Bank 0 Write Access Time = 10 cycles */
#define B0WAT_11		0x0000B000	/* Bank 0 Write Access Time = 11 cycles */
#define B0WAT_12		0x0000C000	/* Bank 0 Write Access Time = 12 cycles */
#define B0WAT_13		0x0000D000	/* Bank 0 Write Access Time = 13 cycles */
#define B0WAT_14		0x0000E000	/* Bank 0 Write Access Time = 14 cycles */
#define B0WAT_15		0x0000F000	/* Bank 0 Write Access Time = 15 cycles */
#define B1RDYEN			0x00010000	/* Bank 1 RDY enable, 0=disable, 1=enable */
#define B1RDYPOL		0x00020000	/* Bank 1 RDY Active high, 0=active low, 1=active high */
#define B1TT_1			0x00040000	/* Bank 1 Transition Time from Read to Write = 1 cycle */
#define B1TT_2			0x00080000	/* Bank 1 Transition Time from Read to Write = 2 cycles */
#define B1TT_3			0x000C0000	/* Bank 1 Transition Time from Read to Write = 3 cycles */
#define B1TT_4			0x00000000	/* Bank 1 Transition Time from Read to Write = 4 cycles */
#define B1ST_1			0x00100000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
#define B1ST_2			0x00200000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
#define B1ST_3			0x00300000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
#define B1ST_4			0x00000000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
#define B1HT_1			0x00400000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
#define B1HT_2			0x00800000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
#define B1HT_3			0x00C00000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
#define B1HT_0			0x00000000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
#define B1RAT_1			0x01000000	/* Bank 1 Read Access Time = 1 cycle */
#define B1RAT_2			0x02000000	/* Bank 1 Read Access Time = 2 cycles */
#define B1RAT_3			0x03000000	/* Bank 1 Read Access Time = 3 cycles */
#define B1RAT_4			0x04000000	/* Bank 1 Read Access Time = 4 cycles */
#define B1RAT_5			0x05000000	/* Bank 1 Read Access Time = 5 cycles */
#define B1RAT_6			0x06000000	/* Bank 1 Read Access Time = 6 cycles */
#define B1RAT_7			0x07000000	/* Bank 1 Read Access Time = 7 cycles */
#define B1RAT_8			0x08000000	/* Bank 1 Read Access Time = 8 cycles */
#define B1RAT_9			0x09000000	/* Bank 1 Read Access Time = 9 cycles */
#define B1RAT_10		0x0A000000	/* Bank 1 Read Access Time = 10 cycles */
#define B1RAT_11		0x0B000000	/* Bank 1 Read Access Time = 11 cycles */
#define B1RAT_12		0x0C000000	/* Bank 1 Read Access Time = 12 cycles */
#define B1RAT_13		0x0D000000	/* Bank 1 Read Access Time = 13 cycles */
#define B1RAT_14		0x0E000000	/* Bank 1 Read Access Time = 14 cycles */
#define B1RAT_15		0x0F000000	/* Bank 1 Read Access Time = 15 cycles */
#define B1WAT_1			0x10000000	/* Bank 1 Write Access Time = 1 cycle */
#define B1WAT_2			0x20000000	/* Bank 1 Write Access Time = 2 cycles */
#define B1WAT_3			0x30000000	/* Bank 1 Write Access Time = 3 cycles */
#define B1WAT_4			0x40000000	/* Bank 1 Write Access Time = 4 cycles */
#define B1WAT_5			0x50000000	/* Bank 1 Write Access Time = 5 cycles */
#define B1WAT_6			0x60000000	/* Bank 1 Write Access Time = 6 cycles */
#define B1WAT_7			0x70000000	/* Bank 1 Write Access Time = 7 cycles */
#define B1WAT_8			0x80000000	/* Bank 1 Write Access Time = 8 cycles */
#define B1WAT_9			0x90000000	/* Bank 1 Write Access Time = 9 cycles */
#define B1WAT_10		0xA0000000	/* Bank 1 Write Access Time = 10 cycles */
#define B1WAT_11		0xB0000000	/* Bank 1 Write Access Time = 11 cycles */
#define B1WAT_12		0xC0000000	/* Bank 1 Write Access Time = 12 cycles */
#define B1WAT_13		0xD0000000	/* Bank 1 Write Access Time = 13 cycles */
#define B1WAT_14		0xE0000000	/* Bank 1 Write Access Time = 14 cycles */
#define B1WAT_15		0xF0000000	/* Bank 1 Write Access Time = 15 cycles */

/* AMBCTL1 Masks */
#define B2RDYEN			0x00000001	/* Bank 2 RDY Enable, 0=disable, 1=enable */
#define B2RDYPOL		0x00000002	/* Bank 2 RDY Active high, 0=active low, 1=active high */
#define B2TT_1			0x00000004	/* Bank 2 Transition Time from Read to Write = 1 cycle */
#define B2TT_2			0x00000008	/* Bank 2 Transition Time from Read to Write = 2 cycles */
#define B2TT_3			0x0000000C	/* Bank 2 Transition Time from Read to Write = 3 cycles */
#define B2TT_4			0x00000000	/* Bank 2 Transition Time from Read to Write = 4 cycles */
#define B2ST_1			0x00000010	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
#define B2ST_2			0x00000020	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
#define B2ST_3			0x00000030	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
#define B2ST_4			0x00000000	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
#define B2HT_1			0x00000040	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
#define B2HT_2			0x00000080	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
#define B2HT_3			0x000000C0	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
#define B2HT_0			0x00000000	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
#define B2RAT_1			0x00000100	/* Bank 2 Read Access Time = 1 cycle */
#define B2RAT_2			0x00000200	/* Bank 2 Read Access Time = 2 cycles */
#define B2RAT_3			0x00000300	/* Bank 2 Read Access Time = 3 cycles */
#define B2RAT_4			0x00000400	/* Bank 2 Read Access Time = 4 cycles */
#define B2RAT_5			0x00000500	/* Bank 2 Read Access Time = 5 cycles */
#define B2RAT_6			0x00000600	/* Bank 2 Read Access Time = 6 cycles */
#define B2RAT_7			0x00000700	/* Bank 2 Read Access Time = 7 cycles */
#define B2RAT_8			0x00000800	/* Bank 2 Read Access Time = 8 cycles */
#define B2RAT_9			0x00000900	/* Bank 2 Read Access Time = 9 cycles */
#define B2RAT_10		0x00000A00	/* Bank 2 Read Access Time = 10 cycles */
#define B2RAT_11		0x00000B00	/* Bank 2 Read Access Time = 11 cycles */
#define B2RAT_12		0x00000C00	/* Bank 2 Read Access Time = 12 cycles */
#define B2RAT_13		0x00000D00	/* Bank 2 Read Access Time = 13 cycles */
#define B2RAT_14		0x00000E00	/* Bank 2 Read Access Time = 14 cycles */
#define B2RAT_15		0x00000F00	/* Bank 2 Read Access Time = 15 cycles */
#define B2WAT_1			0x00001000	/* Bank 2 Write Access Time = 1 cycle */
#define B2WAT_2			0x00002000	/* Bank 2 Write Access Time = 2 cycles */
#define B2WAT_3			0x00003000	/* Bank 2 Write Access Time = 3 cycles */
#define B2WAT_4			0x00004000	/* Bank 2 Write Access Time = 4 cycles */
#define B2WAT_5			0x00005000	/* Bank 2 Write Access Time = 5 cycles */
#define B2WAT_6			0x00006000	/* Bank 2 Write Access Time = 6 cycles */
#define B2WAT_7			0x00007000	/* Bank 2 Write Access Time = 7 cycles */
#define B2WAT_8			0x00008000	/* Bank 2 Write Access Time = 8 cycles */
#define B2WAT_9			0x00009000	/* Bank 2 Write Access Time = 9 cycles */
#define B2WAT_10		0x0000A000	/* Bank 2 Write Access Time = 10 cycles */
#define B2WAT_11		0x0000B000	/* Bank 2 Write Access Time = 11 cycles */
#define B2WAT_12		0x0000C000	/* Bank 2 Write Access Time = 12 cycles */
#define B2WAT_13		0x0000D000	/* Bank 2 Write Access Time = 13 cycles */
#define B2WAT_14		0x0000E000	/* Bank 2 Write Access Time = 14 cycles */
#define B2WAT_15		0x0000F000	/* Bank 2 Write Access Time = 15 cycles */
#define B3RDYEN			0x00010000	/* Bank 3 RDY enable, 0=disable, 1=enable */
#define B3RDYPOL		0x00020000	/* Bank 3 RDY Active high, 0=active low, 1=active high */
#define B3TT_1			0x00040000	/* Bank 3 Transition Time from Read to Write = 1 cycle */
#define B3TT_2			0x00080000	/* Bank 3 Transition Time from Read to Write = 2 cycles */
#define B3TT_3			0x000C0000	/* Bank 3 Transition Time from Read to Write = 3 cycles */
#define B3TT_4			0x00000000	/* Bank 3 Transition Time from Read to Write = 4 cycles */
#define B3ST_1			0x00100000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
#define B3ST_2			0x00200000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
#define B3ST_3			0x00300000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
#define B3ST_4			0x00000000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
#define B3HT_1			0x00400000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
#define B3HT_2			0x00800000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
#define B3HT_3			0x00C00000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
#define B3HT_0			0x00000000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
#define B3RAT_1			0x01000000	/* Bank 3 Read Access Time = 1 cycle */
#define B3RAT_2			0x02000000	/* Bank 3 Read Access Time = 2 cycles */
#define B3RAT_3			0x03000000	/* Bank 3 Read Access Time = 3 cycles */
#define B3RAT_4			0x04000000	/* Bank 3 Read Access Time = 4 cycles */
#define B3RAT_5			0x05000000	/* Bank 3 Read Access Time = 5 cycles */
#define B3RAT_6			0x06000000	/* Bank 3 Read Access Time = 6 cycles */
#define B3RAT_7			0x07000000	/* Bank 3 Read Access Time = 7 cycles */
#define B3RAT_8			0x08000000	/* Bank 3 Read Access Time = 8 cycles */
#define B3RAT_9			0x09000000	/* Bank 3 Read Access Time = 9 cycles */
#define B3RAT_10		0x0A000000	/* Bank 3 Read Access Time = 10 cycles */
#define B3RAT_11		0x0B000000	/* Bank 3 Read Access Time = 11 cycles */
#define B3RAT_12		0x0C000000	/* Bank 3 Read Access Time = 12 cycles */
#define B3RAT_13		0x0D000000	/* Bank 3 Read Access Time = 13 cycles */
#define B3RAT_14		0x0E000000	/* Bank 3 Read Access Time = 14 cycles */
#define B3RAT_15		0x0F000000	/* Bank 3 Read Access Time = 15 cycles */
#define B3WAT_1			0x10000000	/* Bank 3 Write Access Time = 1 cycle */
#define B3WAT_2			0x20000000	/* Bank 3 Write Access Time = 2 cycles */
#define B3WAT_3			0x30000000	/* Bank 3 Write Access Time = 3 cycles */
#define B3WAT_4			0x40000000	/* Bank 3 Write Access Time = 4 cycles */
#define B3WAT_5			0x50000000	/* Bank 3 Write Access Time = 5 cycles */
#define B3WAT_6			0x60000000	/* Bank 3 Write Access Time = 6 cycles */
#define B3WAT_7			0x70000000	/* Bank 3 Write Access Time = 7 cycles */
#define B3WAT_8			0x80000000	/* Bank 3 Write Access Time = 8 cycles */
#define B3WAT_9			0x90000000	/* Bank 3 Write Access Time = 9 cycles */
#define B3WAT_10		0xA0000000	/* Bank 3 Write Access Time = 10 cycles */
#define B3WAT_11		0xB0000000	/* Bank 3 Write Access Time = 11 cycles */
#define B3WAT_12		0xC0000000	/* Bank 3 Write Access Time = 12 cycles */
#define B3WAT_13		0xD0000000	/* Bank 3 Write Access Time = 13 cycles */
#define B3WAT_14		0xE0000000	/* Bank 3 Write Access Time = 14 cycles */
#define B3WAT_15		0xF0000000	/* Bank 3 Write Access Time = 15 cycles */

/* **********************  SDRAM CONTROLLER MASKS  *************************** */

/* SDGCTL Masks */
#define SCTLE			0x00000001	/* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
#define CL_2			0x00000008	/* SDRAM CAS latency = 2 cycles */
#define CL_3			0x0000000C	/* SDRAM CAS latency = 3 cycles */
#define PFE			0x00000010	/* Enable SDRAM prefetch */
#define PFP			0x00000020	/* Prefetch has priority over AMC requests */
B
Blackfin arch: update blackfin header files to latest one in VDSP.  
Bryan Wu 已提交
958 959 960 
#define PASR_ALL		0x00000000	/* All 4 SDRAM Banks Refreshed In Self-Refresh				*/
#define PASR_B0_B1		0x00000010	/* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh		*/
#define PASR_B0			0x00000020	/* Only SDRAM Bank 0 Is Refreshed In Self-Refresh			*/
B
blackfin architecture  
Bryan Wu 已提交
961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 
#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle */
#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles */
#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles */
#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles */
#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles */
#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles */
#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles */
#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles */
#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles */
#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles */
#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles */
#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles */
#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles */
#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles */
#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles */
#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle */
#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles */
#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles */
#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles */
#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles */
#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles */
#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles */
#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle */
#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles */
#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles */
#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles */
#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles */
#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles */
#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles */
#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle */
#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles */
#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles */
#define PUPSD			0x00200000	/*Power-up start delay */
#define PSM			0x00400000	/* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
#define PSS				0x00800000	/* enable SDRAM power-up sequence on next SDRAM access */
#define SRFS			0x01000000	/* Start SDRAM self-refresh mode */
#define EBUFE			0x02000000	/* Enable external buffering timing */
#define FBBRW			0x04000000	/* Fast back-to-back read write enable */
#define EMREN			0x10000000	/* Extended mode register enable */
#define TCSR			0x20000000	/* Temp compensated self refresh value 85 deg C */
#define CDDBG			0x40000000	/* Tristate SDRAM controls during bus grant */

/* EBIU_SDBCTL Masks */
#define EBE			0x00000001	/* Enable SDRAM external bank */
#define EBSZ_16			0x00000000	/* SDRAM external bank size = 16MB */
#define EBSZ_32			0x00000002	/* SDRAM external bank size = 32MB */
#define EBSZ_64			0x00000004	/* SDRAM external bank size = 64MB */
#define EBSZ_128			0x00000006	/* SDRAM external bank size = 128MB */
#define EBCAW_8			0x00000000	/* SDRAM external bank column address width = 8 bits */
#define EBCAW_9			0x00000010	/* SDRAM external bank column address width = 9 bits */
#define EBCAW_10			0x00000020	/* SDRAM external bank column address width = 9 bits */
#define EBCAW_11			0x00000030	/* SDRAM external bank column address width = 9 bits */

/* EBIU_SDSTAT Masks */
#define SDCI			0x00000001	/* SDRAM controller is idle  */
#define SDSRA			0x00000002	/* SDRAM SDRAM self refresh is active */
#define SDPUA			0x00000004	/* SDRAM power up active  */
#define SDRS			0x00000008	/* SDRAM is in reset state */
#define SDEASE		      0x00000010	/* SDRAM EAB sticky error status - W1C */
#define BGSTAT			0x00000020	/* Bus granted */


#endif				/* _DEF_BF532_H */