iwl-prph.h 10.0 KB
Newer Older
Z
Zhu Yi 已提交
1 2 3 4 5 6 7
/******************************************************************************
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
W
Wey-Yi Guy 已提交
8
 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
Z
Zhu Yi 已提交
9 10
 *
 * This program is free software; you can redistribute it and/or modify
11
 * it under the terms of version 2 of the GNU General Public License as
Z
Zhu Yi 已提交
12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
 * USA
 *
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * Contact Information:
28
 *  Intel Linux Wireless <ilw@linux.intel.com>
Z
Zhu Yi 已提交
29 30 31 32
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 * BSD LICENSE
 *
W
Wey-Yi Guy 已提交
33
 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
Z
Zhu Yi 已提交
34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *****************************************************************************/

#ifndef	__iwl_prph_h__
#define __iwl_prph_h__

B
Ben Cahill 已提交
66 67 68 69
/*
 * Registers in this file are internal, not PCI bus memory mapped.
 * Driver accesses these via HBUS_TARG_PRPH_* registers.
 */
Z
Zhu Yi 已提交
70 71 72 73 74 75 76 77 78 79 80 81 82
#define PRPH_BASE	(0x00000)
#define PRPH_END	(0xFFFFF)

/* APMG (power management) constants */
#define APMG_BASE			(PRPH_BASE + 0x3000)
#define APMG_CLK_CTRL_REG		(APMG_BASE + 0x0000)
#define APMG_CLK_EN_REG			(APMG_BASE + 0x0004)
#define APMG_CLK_DIS_REG		(APMG_BASE + 0x0008)
#define APMG_PS_CTRL_REG		(APMG_BASE + 0x000c)
#define APMG_PCIDEV_STT_REG		(APMG_BASE + 0x0010)
#define APMG_RFKILL_REG			(APMG_BASE + 0x0014)
#define APMG_RTC_INT_STT_REG		(APMG_BASE + 0x001c)
#define APMG_RTC_INT_MSK_REG		(APMG_BASE + 0x0020)
W
Wey-Yi Guy 已提交
83 84
#define APMG_DIGITAL_SVR_REG		(APMG_BASE + 0x0058)
#define APMG_ANALOG_SVR_REG		(APMG_BASE + 0x006C)
Z
Zhu Yi 已提交
85

86
#define APMS_CLK_VAL_MRB_FUNC_MODE	(0x00000001)
Z
Zhu Yi 已提交
87 88 89
#define APMG_CLK_VAL_DMA_CLK_RQT	(0x00000200)
#define APMG_CLK_VAL_BSM_CLK_RQT	(0x00000800)

T
Tomas Winkler 已提交
90 91 92 93 94
#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS	(0x00400000)
#define APMG_PS_CTRL_VAL_RESET_REQ		(0x04000000)
#define APMG_PS_CTRL_MSK_PWR_SRC		(0x03000000)
#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN		(0x00000000)
#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX		(0x02000000)
W
Wey-Yi Guy 已提交
95 96
#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK	(0x000001E0) /* bit 8:5 */
#define APMG_SVR_DIGITAL_VOLTAGE_1_32		(0x00000060)
Z
Zhu Yi 已提交
97

T
Tomas Winkler 已提交
98
#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS		(0x00000800)
Z
Zhu Yi 已提交
99

100 101 102
/**
 * Tx Scheduler
 *
T
Tomas Winkler 已提交
103
 * The Tx Scheduler selects the next frame to be transmitted, choosing TFDs
104 105 106 107 108 109
 * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in
 * host DRAM.  It steers each frame's Tx command (which contains the frame
 * data) into one of up to 7 prioritized Tx DMA FIFO channels within the
 * device.  A queue maps to only one (selectable by driver) Tx DMA channel,
 * but one DMA channel may take input from several queues.
 *
110
 * Tx DMA FIFOs have dedicated purposes.
111
 *
112
 * For 5000 series and up, they are used differently
J
Johannes Berg 已提交
113 114 115 116 117 118
 * (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c):
 *
 * 0 -- EDCA BK (background) frames, lowest priority
 * 1 -- EDCA BE (best effort) frames, normal priority
 * 2 -- EDCA VI (video) frames, higher priority
 * 3 -- EDCA VO (voice) and management frames, highest priority
119 120 121
 * 4 -- unused
 * 5 -- unused
 * 6 -- unused
J
Johannes Berg 已提交
122 123
 * 7 -- Commands
 *
124
 * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6.
J
Johannes Berg 已提交
125 126
 * In addition, driver can map the remaining queues to Tx DMA/FIFO
 * channels 0-3 to support 11n aggregation via EDCA DMA channels.
127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143
 *
 * The driver sets up each queue to work in one of two modes:
 *
 * 1)  Scheduler-Ack, in which the scheduler automatically supports a
 *     block-ack (BA) window of up to 64 TFDs.  In this mode, each queue
 *     contains TFDs for a unique combination of Recipient Address (RA)
 *     and Traffic Identifier (TID), that is, traffic of a given
 *     Quality-Of-Service (QOS) priority, destined for a single station.
 *
 *     In scheduler-ack mode, the scheduler keeps track of the Tx status of
 *     each frame within the BA window, including whether it's been transmitted,
 *     and whether it's been acknowledged by the receiving station.  The device
 *     automatically processes block-acks received from the receiving STA,
 *     and reschedules un-acked frames to be retransmitted (successful
 *     Tx completion may end up being out-of-order).
 *
 *     The driver must maintain the queue's Byte Count table in host DRAM
144
 *     for this mode.
145 146 147 148 149 150 151
 *     This mode does not support fragmentation.
 *
 * 2)  FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order.
 *     The device may automatically retry Tx, but will retry only one frame
 *     at a time, until receiving ACK from receiving station, or reaching
 *     retry limit and giving up.
 *
152
 *     The command queue (#4/#9) must use this mode!
153 154 155 156
 *     This mode does not require use of the Byte Count table in host DRAM.
 *
 * Driver controls scheduler operation via 3 means:
 * 1)  Scheduler registers
157
 * 2)  Shared scheduler data base in internal SRAM
158 159 160 161 162 163 164 165 166 167
 * 3)  Shared data in host DRAM
 *
 * Initialization:
 *
 * When loading, driver should allocate memory for:
 * 1)  16 TFD circular buffers, each with space for (typically) 256 TFDs.
 * 2)  16 Byte Count circular buffers in 16 KBytes contiguous memory
 *     (1024 bytes for each queue).
 *
 * After receiving "Alive" response from uCode, driver must initialize
168
 * the scheduler (especially for queue #4/#9, the command queue, otherwise
169 170
 * the driver can't issue commands!):
 */
W
Wey-Yi Guy 已提交
171
#define SCD_MEM_LOWER_BOUND		(0x0000)
172 173 174 175 176 177 178 179 180

/**
 * Max Tx window size is the max number of contiguous TFDs that the scheduler
 * can keep track of at one time when creating block-ack chains of frames.
 * Note that "64" matches the number of ack bits in a block-ack packet.
 */
#define SCD_WIN_SIZE				64
#define SCD_FRAME_LIMIT				64

181 182 183
#define IWL_SCD_TXFIFO_POS_TID			(0)
#define IWL_SCD_TXFIFO_POS_RA			(4)
#define IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK	(0x01FF)
184

185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200
/* agn SCD */
#define IWLAGN_SCD_QUEUE_STTS_REG_POS_TXF	(0)
#define IWLAGN_SCD_QUEUE_STTS_REG_POS_ACTIVE	(3)
#define IWLAGN_SCD_QUEUE_STTS_REG_POS_WSL	(4)
#define IWLAGN_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19)
#define IWLAGN_SCD_QUEUE_STTS_REG_MSK		(0x00FF0000)

#define IWLAGN_SCD_QUEUE_CTX_REG1_CREDIT_POS		(8)
#define IWLAGN_SCD_QUEUE_CTX_REG1_CREDIT_MSK		(0x00FFFF00)
#define IWLAGN_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS	(24)
#define IWLAGN_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK	(0xFF000000)
#define IWLAGN_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS		(0)
#define IWLAGN_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK		(0x0000007F)
#define IWLAGN_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS	(16)
#define IWLAGN_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK	(0x007F0000)

W
Wey-Yi Guy 已提交
201 202 203 204 205 206 207 208 209 210 211
/* Context Data */
#define IWLAGN_SCD_CONTEXT_MEM_LOWER_BOUND	(SCD_MEM_LOWER_BOUND + 0x600)
#define IWLAGN_SCD_CONTEXT_MEM_UPPER_BOUND	(SCD_MEM_LOWER_BOUND + 0x6A0)

/* Tx status */
#define IWLAGN_SCD_TX_STTS_MEM_LOWER_BOUND	(SCD_MEM_LOWER_BOUND + 0x6A0)
#define IWLAGN_SCD_TX_STTS_MEM_UPPER_BOUND	(SCD_MEM_LOWER_BOUND + 0x7E0)

/* Translation Data */
#define IWLAGN_SCD_TRANS_TBL_MEM_LOWER_BOUND	(SCD_MEM_LOWER_BOUND + 0x7E0)
#define IWLAGN_SCD_TRANS_TBL_MEM_UPPER_BOUND	(SCD_MEM_LOWER_BOUND + 0x808)
212 213

#define IWLAGN_SCD_CONTEXT_QUEUE_OFFSET(x)\
W
Wey-Yi Guy 已提交
214
	(IWLAGN_SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8))
215 216

#define IWLAGN_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \
W
Wey-Yi Guy 已提交
217
	((IWLAGN_SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc)
218

219 220 221
#define IWLAGN_SCD_QUEUECHAIN_SEL_ALL(priv)	\
	(((1<<(priv)->hw_params.max_txq_num) - 1) &\
	(~(1<<(priv)->cmd_queue)))
222

223 224 225 226 227 228 229 230 231 232 233 234 235
#define IWLAGN_SCD_BASE			(PRPH_BASE + 0xa02c00)

#define IWLAGN_SCD_SRAM_BASE_ADDR	(IWLAGN_SCD_BASE + 0x0)
#define IWLAGN_SCD_DRAM_BASE_ADDR	(IWLAGN_SCD_BASE + 0x8)
#define IWLAGN_SCD_AIT			(IWLAGN_SCD_BASE + 0x0c)
#define IWLAGN_SCD_TXFACT		(IWLAGN_SCD_BASE + 0x10)
#define IWLAGN_SCD_ACTIVE		(IWLAGN_SCD_BASE + 0x14)
#define IWLAGN_SCD_QUEUE_WRPTR(x)	(IWLAGN_SCD_BASE + 0x18 + (x) * 4)
#define IWLAGN_SCD_QUEUE_RDPTR(x)	(IWLAGN_SCD_BASE + 0x68 + (x) * 4)
#define IWLAGN_SCD_QUEUECHAIN_SEL	(IWLAGN_SCD_BASE + 0xe8)
#define IWLAGN_SCD_AGGR_SEL		(IWLAGN_SCD_BASE + 0x248)
#define IWLAGN_SCD_INTERRUPT_MASK	(IWLAGN_SCD_BASE + 0x108)
#define IWLAGN_SCD_QUEUE_STATUS_BITS(x)	(IWLAGN_SCD_BASE + 0x10c + (x) * 4)
236

237 238
/*********************** END TX SCHEDULER *************************************/

Z
Zhu Yi 已提交
239
#endif				/* __iwl_prph_h__ */