board-dm365-evm.c

/*
 * TI DaVinci DM365 EVM board support
 *
 * Copyright (C) 2009 Texas Instruments Incorporated
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation version 2.
 *
 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
 * kind, whether express or implied; without even the implied warranty
 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/i2c/at24.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <mach/hardware.h>
#include <mach/dm365.h>
#include <mach/psc.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <linux/i2c.h>
#include <mach/serial.h>
#include <mach/common.h>

#define DM365_EVM_PHY_MASK		(0x2)
#define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */

static struct at24_platform_data eeprom_info = {
	.byte_len       = (256*1024) / 8,
	.page_size      = 64,
	.flags          = AT24_FLAG_ADDR16,
	.setup          = davinci_get_mac_addr,
	.context	= (void *)0x7f00,
};

static struct i2c_board_info i2c_info[] = {
	{
		I2C_BOARD_INFO("24c256", 0x50),
		.platform_data	= &eeprom_info,
	},
};

static struct davinci_i2c_platform_data i2c_pdata = {
	.bus_freq	= 400	/* kHz */,
	.bus_delay	= 0	/* usec */,
};

static void dm365evm_emac_configure(void)
{
	/*
	 * EMAC pins are multiplexed with GPIO and UART
	 * Further details are available at the DM365 ARM
	 * Subsystem Users Guide(sprufg5.pdf) pages 125 - 127
	 */
	davinci_cfg_reg(DM365_EMAC_TX_EN);
	davinci_cfg_reg(DM365_EMAC_TX_CLK);
	davinci_cfg_reg(DM365_EMAC_COL);
	davinci_cfg_reg(DM365_EMAC_TXD3);
	davinci_cfg_reg(DM365_EMAC_TXD2);
	davinci_cfg_reg(DM365_EMAC_TXD1);
	davinci_cfg_reg(DM365_EMAC_TXD0);
	davinci_cfg_reg(DM365_EMAC_RXD3);
	davinci_cfg_reg(DM365_EMAC_RXD2);
	davinci_cfg_reg(DM365_EMAC_RXD1);
	davinci_cfg_reg(DM365_EMAC_RXD0);
	davinci_cfg_reg(DM365_EMAC_RX_CLK);
	davinci_cfg_reg(DM365_EMAC_RX_DV);
	davinci_cfg_reg(DM365_EMAC_RX_ER);
	davinci_cfg_reg(DM365_EMAC_CRS);
	davinci_cfg_reg(DM365_EMAC_MDIO);
	davinci_cfg_reg(DM365_EMAC_MDCLK);

	/*
	 * EMAC interrupts are multiplexed with GPIO interrupts
	 * Details are available at the DM365 ARM
	 * Subsystem Users Guide(sprufg5.pdf) pages 133 - 134
	 */
	davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH);
	davinci_cfg_reg(DM365_INT_EMAC_RXPULSE);
	davinci_cfg_reg(DM365_INT_EMAC_TXPULSE);
	davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
}

static void __init evm_init_i2c(void)
{
	davinci_init_i2c(&i2c_pdata);
	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
}

static struct davinci_uart_config uart_config __initdata = {
	.enabled_uarts = (1 << 0),
};

static void __init dm365_evm_map_io(void)
{
	dm365_init();
}

static __init void dm365_evm_init(void)
{
	struct davinci_soc_info *soc_info = &davinci_soc_info;

	evm_init_i2c();
	davinci_serial_init(&uart_config);

	dm365evm_emac_configure();

	soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
	soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
}

static __init void dm365_evm_irq_init(void)
{
	davinci_irq_init();
}

MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
	.phys_io	= IO_PHYS,
	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
	.boot_params	= (0x80000100),
	.map_io		= dm365_evm_map_io,
	.init_irq	= dm365_evm_irq_init,
	.timer		= &davinci_timer,
	.init_machine	= dm365_evm_init,
MACHINE_END