au1xxx-ide.c 19.8 KB
Newer Older
P
Pete Popov 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
/*
 * linux/drivers/ide/mips/au1xxx-ide.c  version 01.30.00        Aug. 02 2005
 *
 * BRIEF MODULE DESCRIPTION
 * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
 *
 * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
 *
 * This program is free software; you can redistribute it and/or modify it under
 * the terms of the GNU General Public License as published by the Free Software
 * Foundation; either version 2 of the License, or (at your option) any later
 * version.
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
 * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
 *       Interface and Linux Device Driver" Application Note.
 */
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
J
Jordan Crouse 已提交
36 37
#include <linux/platform_device.h>

P
Pete Popov 已提交
38 39 40 41 42 43
#include <linux/init.h>
#include <linux/ide.h>
#include <linux/sysdev.h>

#include <linux/dma-mapping.h>

J
Jordan Crouse 已提交
44 45
#include "ide-timing.h"

P
Pete Popov 已提交
46 47 48 49 50 51 52 53
#include <asm/io.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>

#include <asm/mach-au1x00/au1xxx_ide.h>

#define DRV_NAME	"au1200-ide"
#define DRV_VERSION	"1.0"
J
Jordan Crouse 已提交
54
#define DRV_AUTHOR	"Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>"
P
Pete Popov 已提交
55

J
Jordan Crouse 已提交
56 57
/* enable the burstmode in the dbdma */
#define IDE_AU1XXX_BURSTMODE	1
P
Pete Popov 已提交
58

J
Jordan Crouse 已提交
59 60
static _auide_hwif auide_hwif;
static int dbdma_init_done;
P
Pete Popov 已提交
61 62 63

#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)

J
Jordan Crouse 已提交
64
void auide_insw(unsigned long port, void *addr, u32 count)
P
Pete Popov 已提交
65
{
J
Jordan Crouse 已提交
66 67 68
	_auide_hwif *ahwif = &auide_hwif;
	chan_tab_t *ctp;
	au1x_ddma_desc_t *dp;
P
Pete Popov 已提交
69

J
Jordan Crouse 已提交
70 71 72 73 74 75 76 77 78 79
	if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, 
			   DDMA_FLAGS_NOIE)) {
		printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
		return;
	}
	ctp = *((chan_tab_t **)ahwif->rx_chan);
	dp = ctp->cur_ptr;
	while (dp->dscr_cmd0 & DSCR_CMD0_V)
		;
	ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
P
Pete Popov 已提交
80 81
}

J
Jordan Crouse 已提交
82
void auide_outsw(unsigned long port, void *addr, u32 count)
P
Pete Popov 已提交
83
{
J
Jordan Crouse 已提交
84 85 86
	_auide_hwif *ahwif = &auide_hwif;
	chan_tab_t *ctp;
	au1x_ddma_desc_t *dp;
P
Pete Popov 已提交
87

J
Jordan Crouse 已提交
88 89 90 91 92 93 94 95 96 97
	if(!put_source_flags(ahwif->tx_chan, (void*)addr,
			     count << 1, DDMA_FLAGS_NOIE)) {
		printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
		return;
	}
	ctp = *((chan_tab_t **)ahwif->tx_chan);
	dp = ctp->cur_ptr;
	while (dp->dscr_cmd0 & DSCR_CMD0_V)
		;
	ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
P
Pete Popov 已提交
98 99 100 101 102 103
}

#endif

static void auide_tune_drive(ide_drive_t *drive, byte pio)
{
J
Jordan Crouse 已提交
104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175
	int mem_sttime;
	int mem_stcfg;
	u8 speed;

	/* get the best pio mode for the drive */
	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);

	printk(KERN_INFO "%s: setting Au1XXX IDE to PIO mode%d\n",
	       drive->name, pio);

	mem_sttime = 0;
	mem_stcfg  = au_readl(MEM_STCFG2);

	/* set pio mode! */
	switch(pio) {
	case 0:
		mem_sttime = SBC_IDE_TIMING(PIO0);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS;
		break;

	case 1:
		mem_sttime = SBC_IDE_TIMING(PIO1);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS;
		break;

	case 2:
		mem_sttime = SBC_IDE_TIMING(PIO2);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS;
		break;

	case 3:
		mem_sttime = SBC_IDE_TIMING(PIO3);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS;

		break;

	case 4:
		mem_sttime = SBC_IDE_TIMING(PIO4);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS;
		break;
	}

	au_writel(mem_sttime,MEM_STTIME2);
	au_writel(mem_stcfg,MEM_STCFG2);

	speed = pio + XFER_PIO_0;
	ide_config_drive_speed(drive, speed);
P
Pete Popov 已提交
176 177 178 179
}

static int auide_tune_chipset (ide_drive_t *drive, u8 speed)
{
J
Jordan Crouse 已提交
180 181
	int mem_sttime;
	int mem_stcfg;
P
Pete Popov 已提交
182

J
Jordan Crouse 已提交
183 184
	mem_sttime = 0;
	mem_stcfg  = au_readl(MEM_STCFG2);
P
Pete Popov 已提交
185

J
Jordan Crouse 已提交
186 187 188 189
	if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
		auide_tune_drive(drive, speed - XFER_PIO_0);
		return 0;
	}
190

J
Jordan Crouse 已提交
191
	switch(speed) {
P
Pete Popov 已提交
192
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
J
Jordan Crouse 已提交
193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222
	case XFER_MW_DMA_2:
		mem_sttime = SBC_IDE_TIMING(MDMA2);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS;

		break;
	case XFER_MW_DMA_1:
		mem_sttime = SBC_IDE_TIMING(MDMA1);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS;

		break;
	case XFER_MW_DMA_0:
		mem_sttime = SBC_IDE_TIMING(MDMA0);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS;

		break;
P
Pete Popov 已提交
223
#endif
J
Jordan Crouse 已提交
224 225 226
	default:
		return 1;
	}
227 228

	if (ide_config_drive_speed(drive, speed))
J
Jordan Crouse 已提交
229
		return 1;
P
Pete Popov 已提交
230

J
Jordan Crouse 已提交
231 232
	au_writel(mem_sttime,MEM_STTIME2);
	au_writel(mem_stcfg,MEM_STCFG2);
P
Pete Popov 已提交
233

J
Jordan Crouse 已提交
234
	return 0;
P
Pete Popov 已提交
235 236 237 238 239 240
}

/*
 * Multi-Word DMA + DbDMA functions
 */

J
Jordan Crouse 已提交
241
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
P
Pete Popov 已提交
242 243 244

static int auide_build_sglist(ide_drive_t *drive,  struct request *rq)
{
J
Jordan Crouse 已提交
245 246 247
	ide_hwif_t *hwif = drive->hwif;
	_auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
	struct scatterlist *sg = hwif->sg_table;
P
Pete Popov 已提交
248

J
Jordan Crouse 已提交
249
	ide_map_sg(drive, rq);
P
Pete Popov 已提交
250

J
Jordan Crouse 已提交
251 252 253 254
	if (rq_data_dir(rq) == READ)
		hwif->sg_dma_direction = DMA_FROM_DEVICE;
	else
		hwif->sg_dma_direction = DMA_TO_DEVICE;
P
Pete Popov 已提交
255

J
Jordan Crouse 已提交
256 257
	return dma_map_sg(ahwif->dev, sg, hwif->sg_nents,
			  hwif->sg_dma_direction);
P
Pete Popov 已提交
258 259 260 261
}

static int auide_build_dmatable(ide_drive_t *drive)
{
J
Jordan Crouse 已提交
262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311
	int i, iswrite, count = 0;
	ide_hwif_t *hwif = HWIF(drive);

	struct request *rq = HWGROUP(drive)->rq;

	_auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
	struct scatterlist *sg;

	iswrite = (rq_data_dir(rq) == WRITE);
	/* Save for interrupt context */
	ahwif->drive = drive;

	/* Build sglist */
	hwif->sg_nents = i = auide_build_sglist(drive, rq);

	if (!i)
		return 0;

	/* fill the descriptors */
	sg = hwif->sg_table;
	while (i && sg_dma_len(sg)) {
		u32 cur_addr;
		u32 cur_len;

		cur_addr = sg_dma_address(sg);
		cur_len = sg_dma_len(sg);

		while (cur_len) {
			u32 flags = DDMA_FLAGS_NOIE;
			unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;

			if (++count >= PRD_ENTRIES) {
				printk(KERN_WARNING "%s: DMA table too small\n",
				       drive->name);
				goto use_pio_instead;
			}

			/* Lets enable intr for the last descriptor only */
			if (1==i)
				flags = DDMA_FLAGS_IE;
			else
				flags = DDMA_FLAGS_NOIE;

			if (iswrite) {
				if(!put_source_flags(ahwif->tx_chan, 
						     (void*)(page_address(sg->page) 
							     + sg->offset), 
						     tc, flags)) { 
					printk(KERN_ERR "%s failed %d\n", 
					       __FUNCTION__, __LINE__);
P
Pete Popov 已提交
312
				}
J
Jordan Crouse 已提交
313
			} else 
P
Pete Popov 已提交
314
			{
J
Jordan Crouse 已提交
315 316 317 318 319 320
				if(!put_dest_flags(ahwif->rx_chan, 
						   (void*)(page_address(sg->page) 
							   + sg->offset), 
						   tc, flags)) { 
					printk(KERN_ERR "%s failed %d\n", 
					       __FUNCTION__, __LINE__);
P
Pete Popov 已提交
321
				}
J
Jordan Crouse 已提交
322
			}
P
Pete Popov 已提交
323

J
Jordan Crouse 已提交
324 325 326 327 328 329
			cur_addr += tc;
			cur_len -= tc;
		}
		sg++;
		i--;
	}
P
Pete Popov 已提交
330

J
Jordan Crouse 已提交
331 332
	if (count)
		return 1;
P
Pete Popov 已提交
333

J
Jordan Crouse 已提交
334 335 336 337 338
 use_pio_instead:
	dma_unmap_sg(ahwif->dev,
		     hwif->sg_table,
		     hwif->sg_nents,
		     hwif->sg_dma_direction);
P
Pete Popov 已提交
339

J
Jordan Crouse 已提交
340
	return 0; /* revert to PIO for this request */
P
Pete Popov 已提交
341 342 343 344
}

static int auide_dma_end(ide_drive_t *drive)
{
J
Jordan Crouse 已提交
345 346
	ide_hwif_t *hwif = HWIF(drive);
	_auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
P
Pete Popov 已提交
347

J
Jordan Crouse 已提交
348 349 350 351 352
	if (hwif->sg_nents) {
		dma_unmap_sg(ahwif->dev, hwif->sg_table, hwif->sg_nents,
			     hwif->sg_dma_direction);
		hwif->sg_nents = 0;
	}
P
Pete Popov 已提交
353

J
Jordan Crouse 已提交
354
	return 0;
P
Pete Popov 已提交
355 356 357 358 359 360 361 362 363
}

static void auide_dma_start(ide_drive_t *drive )
{
}


static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command)
{
J
Jordan Crouse 已提交
364 365 366
	/* issue cmd to drive */
	ide_execute_command(drive, command, &ide_dma_intr,
			    (2*WAIT_CMD), NULL);
P
Pete Popov 已提交
367 368 369
}

static int auide_dma_setup(ide_drive_t *drive)
J
Jordan Crouse 已提交
370 371
{       	
	struct request *rq = HWGROUP(drive)->rq;
P
Pete Popov 已提交
372

J
Jordan Crouse 已提交
373 374 375 376
	if (!auide_build_dmatable(drive)) {
		ide_map_sg(drive, rq);
		return 1;
	}
P
Pete Popov 已提交
377

J
Jordan Crouse 已提交
378 379
	drive->waiting_for_dma = 1;
	return 0;
P
Pete Popov 已提交
380 381 382 383
}

static int auide_dma_check(ide_drive_t *drive)
{
J
Jordan Crouse 已提交
384
	u8 speed;
P
Pete Popov 已提交
385 386

#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
J
Jordan Crouse 已提交
387 388 389 390 391 392 393 394 395 396

	if( dbdma_init_done == 0 ){
		auide_hwif.white_list = ide_in_drive_list(drive->id,
							  dma_white_list);
		auide_hwif.black_list = ide_in_drive_list(drive->id,
							  dma_black_list);
		auide_hwif.drive = drive;
		auide_ddma_init(&auide_hwif);
		dbdma_init_done = 1;
	}
P
Pete Popov 已提交
397 398
#endif

J
Jordan Crouse 已提交
399 400 401 402 403 404
	/* Is the drive in our DMA black list? */

	if ( auide_hwif.black_list ) {
		drive->using_dma = 0;

		/* Borrowed the warning message from ide-dma.c */
P
Pete Popov 已提交
405

J
Jordan Crouse 已提交
406 407 408 409 410 411 412 413 414
		printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n",
		       drive->name, drive->id->model);	       
	}
	else
		drive->using_dma = 1;

	speed = ide_find_best_mode(drive, XFER_PIO | XFER_MWDMA);
	
	if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
415
		return 0;
J
Jordan Crouse 已提交
416

417
	return -1;
P
Pete Popov 已提交
418 419 420
}

static int auide_dma_test_irq(ide_drive_t *drive)
J
Jordan Crouse 已提交
421 422 423
{	
	if (drive->waiting_for_dma == 0)
		printk(KERN_WARNING "%s: ide_dma_test_irq \
P
Pete Popov 已提交
424 425
                                     called while not waiting\n", drive->name);

J
Jordan Crouse 已提交
426 427
	/* If dbdma didn't execute the STOP command yet, the
	 * active bit is still set
P
Pete Popov 已提交
428
	 */
J
Jordan Crouse 已提交
429 430 431
	drive->waiting_for_dma++;
	if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
		printk(KERN_WARNING "%s: timeout waiting for ddma to \
P
Pete Popov 已提交
432
                                     complete\n", drive->name);
J
Jordan Crouse 已提交
433 434 435 436
		return 1;
	}
	udelay(10);
	return 0;
P
Pete Popov 已提交
437 438
}

439
static void auide_dma_host_on(ide_drive_t *drive)
P
Pete Popov 已提交
440 441 442 443 444
{
}

static int auide_dma_on(ide_drive_t *drive)
{
J
Jordan Crouse 已提交
445
	drive->using_dma = 1;
446 447

	return 0;
P
Pete Popov 已提交
448 449
}

450
static void auide_dma_host_off(ide_drive_t *drive)
P
Pete Popov 已提交
451 452 453
{
}

454
static void auide_dma_off_quietly(ide_drive_t *drive)
P
Pete Popov 已提交
455
{
J
Jordan Crouse 已提交
456
	drive->using_dma = 0;
P
Pete Popov 已提交
457 458
}

459
static void auide_dma_lost_irq(ide_drive_t *drive)
P
Pete Popov 已提交
460
{
J
Jordan Crouse 已提交
461
	printk(KERN_ERR "%s: IRQ lost\n", drive->name);
P
Pete Popov 已提交
462 463
}

464
static void auide_ddma_tx_callback(int irq, void *param)
P
Pete Popov 已提交
465
{
J
Jordan Crouse 已提交
466 467
	_auide_hwif *ahwif = (_auide_hwif*)param;
	ahwif->drive->waiting_for_dma = 0;
P
Pete Popov 已提交
468 469
}

470
static void auide_ddma_rx_callback(int irq, void *param)
P
Pete Popov 已提交
471
{
J
Jordan Crouse 已提交
472 473 474 475 476
	_auide_hwif *ahwif = (_auide_hwif*)param;
	ahwif->drive->waiting_for_dma = 0;
}

#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
P
Pete Popov 已提交
477

J
Jordan Crouse 已提交
478 479 480 481 482 483 484 485 486
static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags)
{
	dev->dev_id          = dev_id;
	dev->dev_physaddr    = (u32)AU1XXX_ATA_PHYS_ADDR;
	dev->dev_intlevel    = 0;
	dev->dev_intpolarity = 0;
	dev->dev_tsize       = tsize;
	dev->dev_devwidth    = devwidth;
	dev->dev_flags       = flags;
P
Pete Popov 已提交
487
}
J
Jordan Crouse 已提交
488 489
  
#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
P
Pete Popov 已提交
490

491
static void auide_dma_timeout(ide_drive_t *drive)
P
Pete Popov 已提交
492
{
493
	ide_hwif_t *hwif = HWIF(drive);
P
Pete Popov 已提交
494

J
Jordan Crouse 已提交
495
	printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
P
Pete Popov 已提交
496

497 498
	if (hwif->ide_dma_test_irq(drive))
		return;
P
Pete Popov 已提交
499

500
	hwif->ide_dma_end(drive);
P
Pete Popov 已提交
501
}
J
Jordan Crouse 已提交
502
					
P
Pete Popov 已提交
503

J
Jordan Crouse 已提交
504 505 506 507 508
static int auide_ddma_init(_auide_hwif *auide) {
	
	dbdev_tab_t source_dev_tab, target_dev_tab;
	u32 dev_id, tsize, devwidth, flags;
	ide_hwif_t *hwif = auide->hwif;
P
Pete Popov 已提交
509

J
Jordan Crouse 已提交
510
	dev_id   = AU1XXX_ATA_DDMA_REQ;
P
Pete Popov 已提交
511

J
Jordan Crouse 已提交
512 513 514 515 516 517 518 519 520 521 522
	if (auide->white_list || auide->black_list) {
		tsize    = 8;
		devwidth = 32;
	}
	else { 
		tsize    = 1;
		devwidth = 16;
		
		printk(KERN_ERR "au1xxx-ide: %s is not on ide driver whitelist.\n",auide_hwif.drive->id->model);
		printk(KERN_ERR "            please read 'Documentation/mips/AU1xxx_IDE.README'");
	}
P
Pete Popov 已提交
523

J
Jordan Crouse 已提交
524 525
#ifdef IDE_AU1XXX_BURSTMODE 
	flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
P
Pete Popov 已提交
526
#else
J
Jordan Crouse 已提交
527
	flags = DEV_FLAGS_SYNC;
P
Pete Popov 已提交
528 529
#endif

J
Jordan Crouse 已提交
530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572
	/* setup dev_tab for tx channel */
	auide_init_dbdma_dev( &source_dev_tab,
			      dev_id,
			      tsize, devwidth, DEV_FLAGS_OUT | flags);
 	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );

	auide_init_dbdma_dev( &source_dev_tab,
			      dev_id,
			      tsize, devwidth, DEV_FLAGS_IN | flags);
 	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
	
	/* We also need to add a target device for the DMA */
	auide_init_dbdma_dev( &target_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      tsize, devwidth, DEV_FLAGS_ANYUSE);
	auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);	
 
	/* Get a channel for TX */
	auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id,
						 auide->tx_dev_id,
						 auide_ddma_tx_callback,
						 (void*)auide);
 
	/* Get a channel for RX */
	auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
						 auide->target_dev_id,
						 auide_ddma_rx_callback,
						 (void*)auide);

	auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
							     NUM_DESCRIPTORS);
	auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
							     NUM_DESCRIPTORS);
 
	hwif->dmatable_cpu = dma_alloc_coherent(auide->dev,
						PRD_ENTRIES * PRD_BYTES,        /* 1 Page */
						&hwif->dmatable_dma, GFP_KERNEL);
	
	au1xxx_dbdma_start( auide->tx_chan );
	au1xxx_dbdma_start( auide->rx_chan );
 
	return 0;
} 
P
Pete Popov 已提交
573
#else
J
Jordan Crouse 已提交
574 575 576 577 578
 
static int auide_ddma_init( _auide_hwif *auide )
{
	dbdev_tab_t source_dev_tab;
	int flags;
P
Pete Popov 已提交
579

J
Jordan Crouse 已提交
580 581 582 583
#ifdef IDE_AU1XXX_BURSTMODE 
	flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
#else
	flags = DEV_FLAGS_SYNC;
P
Pete Popov 已提交
584 585
#endif

J
Jordan Crouse 已提交
586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617
	/* setup dev_tab for tx channel */
	auide_init_dbdma_dev( &source_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      8, 32, DEV_FLAGS_OUT | flags);
 	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );

	auide_init_dbdma_dev( &source_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      8, 32, DEV_FLAGS_IN | flags);
 	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
	
	/* Get a channel for TX */
	auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS,
						 auide->tx_dev_id,
						 NULL,
						 (void*)auide);
 
	/* Get a channel for RX */
	auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
						 DSCR_CMD0_ALWAYS,
						 NULL,
						 (void*)auide);
 
	auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
							     NUM_DESCRIPTORS);
	auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
							     NUM_DESCRIPTORS);
 
	au1xxx_dbdma_start( auide->tx_chan );
	au1xxx_dbdma_start( auide->rx_chan );
 	
	return 0;
P
Pete Popov 已提交
618
}
J
Jordan Crouse 已提交
619
#endif
P
Pete Popov 已提交
620 621 622

static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
{
J
Jordan Crouse 已提交
623 624 625 626 627 628 629 630 631 632
	int i;
	unsigned long *ata_regs = hw->io_ports;

	/* FIXME? */
	for (i = 0; i < IDE_CONTROL_OFFSET; i++) {
		*ata_regs++ = ahwif->regbase + (i << AU1XXX_ATA_REG_OFFSET);
	}

	/* set the Alternative Status register */
	*ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET);
P
Pete Popov 已提交
633 634 635 636 637
}

static int au_ide_probe(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
J
Jordan Crouse 已提交
638 639
	_auide_hwif *ahwif = &auide_hwif;
	ide_hwif_t *hwif;
P
Pete Popov 已提交
640
	struct resource *res;
641
	hw_regs_t *hw;
P
Pete Popov 已提交
642 643 644
	int ret = 0;

#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
J
Jordan Crouse 已提交
645
	char *mode = "MWDMA2";
P
Pete Popov 已提交
646
#elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
J
Jordan Crouse 已提交
647
	char *mode = "PIO+DDMA(offload)";
P
Pete Popov 已提交
648 649
#endif

J
Jordan Crouse 已提交
650 651
	memset(&auide_hwif, 0, sizeof(_auide_hwif));
	auide_hwif.dev                  = 0;
P
Pete Popov 已提交
652 653 654 655 656 657 658 659 660

	ahwif->dev = dev;
	ahwif->irq = platform_get_irq(pdev, 0);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	if (res == NULL) {
		pr_debug("%s %d: no base address\n", DRV_NAME, pdev->id);
		ret = -ENODEV;
661 662 663 664 665
		goto out;
	}
	if (ahwif->irq < 0) {
		pr_debug("%s %d: no IRQ\n", DRV_NAME, pdev->id);
		ret = -ENODEV;
P
Pete Popov 已提交
666 667 668
		goto out;
	}

J
Jordan Crouse 已提交
669
	if (!request_mem_region (res->start, res->end-res->start, pdev->name)) {
P
Pete Popov 已提交
670
		pr_debug("%s: request_mem_region failed\n", DRV_NAME);
J
Jordan Crouse 已提交
671
		ret =  -EBUSY;
P
Pete Popov 已提交
672
		goto out;
J
Jordan Crouse 已提交
673
	}
P
Pete Popov 已提交
674 675 676 677 678 679 680

	ahwif->regbase = (u32)ioremap(res->start, res->end-res->start);
	if (ahwif->regbase == 0) {
		ret = -ENOMEM;
		goto out;
	}

J
Jordan Crouse 已提交
681 682 683
	/* FIXME:  This might possibly break PCMCIA IDE devices */

	hwif                            = &ide_hwifs[pdev->id];
684
	hw 				= &hwif->hw;
J
Jordan Crouse 已提交
685 686
	hwif->irq = hw->irq             = ahwif->irq;
	hwif->chipset                   = ide_au1xxx;
P
Pete Popov 已提交
687

J
Jordan Crouse 已提交
688
	auide_setup_ports(hw, ahwif);
P
Pete Popov 已提交
689 690
	memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports));

J
Jordan Crouse 已提交
691
	hwif->ultra_mask                = 0x0;  /* Disable Ultra DMA */
P
Pete Popov 已提交
692
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
J
Jordan Crouse 已提交
693 694
	hwif->mwdma_mask                = 0x07; /* Multimode-2 DMA  */
	hwif->swdma_mask                = 0x00;
P
Pete Popov 已提交
695
#else
J
Jordan Crouse 已提交
696 697 698 699 700 701 702 703 704 705
	hwif->mwdma_mask                = 0x0;
	hwif->swdma_mask                = 0x0;
#endif

	hwif->noprobe = 0;
	hwif->drives[0].unmask          = 1;
	hwif->drives[1].unmask          = 1;

	/* hold should be on in all cases */
	hwif->hold                      = 1;
706 707

	hwif->mmio  = 1;
J
Jordan Crouse 已提交
708 709 710 711 712 713 714 715

	/* If the user has selected DDMA assisted copies,
	   then set up a few local I/O function entry points 
	*/

#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA	
	hwif->INSW                      = auide_insw;
	hwif->OUTSW                     = auide_outsw;
P
Pete Popov 已提交
716
#endif
J
Jordan Crouse 已提交
717 718 719

	hwif->tuneproc                  = &auide_tune_drive;
	hwif->speedproc                 = &auide_tune_chipset;
P
Pete Popov 已提交
720 721

#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
722
	hwif->dma_off_quietly		= &auide_dma_off_quietly;
723
	hwif->dma_timeout		= &auide_dma_timeout;
J
Jordan Crouse 已提交
724 725 726 727 728 729 730

	hwif->ide_dma_check             = &auide_dma_check;
	hwif->dma_exec_cmd              = &auide_dma_exec_cmd;
	hwif->dma_start                 = &auide_dma_start;
	hwif->ide_dma_end               = &auide_dma_end;
	hwif->dma_setup                 = &auide_dma_setup;
	hwif->ide_dma_test_irq          = &auide_dma_test_irq;
731
	hwif->dma_host_off		= &auide_dma_host_off;
732
	hwif->dma_host_on		= &auide_dma_host_on;
733
	hwif->dma_lost_irq		= &auide_dma_lost_irq;
J
Jordan Crouse 已提交
734 735 736 737 738 739 740
	hwif->ide_dma_on                = &auide_dma_on;

	hwif->autodma                   = 1;
	hwif->drives[0].autodma         = hwif->autodma;
	hwif->drives[1].autodma         = hwif->autodma;
	hwif->atapi_dma                 = 1;

P
Pete Popov 已提交
741
#else /* !CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
J
Jordan Crouse 已提交
742 743 744 745 746 747 748 749
	hwif->autodma                   = 0;
	hwif->channel                   = 0;
	hwif->hold                      = 1;
	hwif->select_data               = 0;    /* no chipset-specific code */
	hwif->config_data               = 0;    /* no chipset-specific code */

	hwif->drives[0].autodma         = 0;
	hwif->drives[0].autotune        = 1;    /* 1=autotune, 2=noautotune, 0=default */
P
Pete Popov 已提交
750
#endif
J
Jordan Crouse 已提交
751
	hwif->drives[0].no_io_32bit     = 1;   
P
Pete Popov 已提交
752

J
Jordan Crouse 已提交
753 754
	auide_hwif.hwif                 = hwif;
	hwif->hwif_data                 = &auide_hwif;
P
Pete Popov 已提交
755

J
Jordan Crouse 已提交
756 757 758
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA           
	auide_ddma_init(&auide_hwif);
	dbdma_init_done = 1;
P
Pete Popov 已提交
759 760 761
#endif

	probe_hwif_init(hwif);
762 763 764

	ide_proc_register_port(hwif);

P
Pete Popov 已提交
765 766
	dev_set_drvdata(dev, hwif);

J
Jordan Crouse 已提交
767
	printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode );
P
Pete Popov 已提交
768

J
Jordan Crouse 已提交
769 770
 out:
	return ret;
P
Pete Popov 已提交
771 772 773 774 775 776 777
}

static int au_ide_remove(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct resource *res;
	ide_hwif_t *hwif = dev_get_drvdata(dev);
J
Jordan Crouse 已提交
778
	_auide_hwif *ahwif = &auide_hwif;
P
Pete Popov 已提交
779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801

	ide_unregister(hwif - ide_hwifs);

	iounmap((void *)ahwif->regbase);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	release_mem_region(res->start, res->end - res->start);

	return 0;
}

static struct device_driver au1200_ide_driver = {
	.name		= "au1200-ide",
	.bus		= &platform_bus_type,
	.probe 		= au_ide_probe,
	.remove		= au_ide_remove,
};

static int __init au_ide_init(void)
{
	return driver_register(&au1200_ide_driver);
}

J
Jordan Crouse 已提交
802
static void __exit au_ide_exit(void)
P
Pete Popov 已提交
803 804 805 806 807 808 809 810 811
{
	driver_unregister(&au1200_ide_driver);
}

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("AU1200 IDE driver");

module_init(au_ide_init);
module_exit(au_ide_exit);