rtc-ds1307.c 24.5 KB
Newer Older
1 2 3 4 5
/*
 * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips.
 *
 *  Copyright (C) 2005 James Chapman (ds1337 core)
 *  Copyright (C) 2006 David Brownell
6
 *  Copyright (C) 2009 Matthias Fuchs (rx8025 support)
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/string.h>
#include <linux/rtc.h>
#include <linux/bcd.h>



/* We can't determine type by probing, but if we expect pre-Linux code
 * to have set the chip up as a clock (turning on the oscillator and
 * setting the date and time), Linux can ignore the non-clock features.
 * That's a natural job for a factory or repair bench.
 */
enum ds_type {
D
David Brownell 已提交
29 30 31 32 33
	ds_1307,
	ds_1337,
	ds_1338,
	ds_1339,
	ds_1340,
J
Joakim Tjernlund 已提交
34
	ds_1388,
W
Wolfram Sang 已提交
35
	ds_3231,
D
David Brownell 已提交
36
	m41t00,
37
	mcp7941x,
38
	rx_8025,
39 40 41 42 43 44 45
	// rs5c372 too?  different address...
};


/* RTC registers don't differ much, except for the century flag */
#define DS1307_REG_SECS		0x00	/* 00-59 */
#	define DS1307_BIT_CH		0x80
46
#	define DS1340_BIT_nEOSC		0x80
47
#	define MCP7941X_BIT_ST		0x80
48 49
#define DS1307_REG_MIN		0x01	/* 00-59 */
#define DS1307_REG_HOUR		0x02	/* 00-23, or 1-12{am,pm} */
50 51
#	define DS1307_BIT_12HR		0x40	/* in REG_HOUR */
#	define DS1307_BIT_PM		0x20	/* in REG_HOUR */
52 53 54
#	define DS1340_BIT_CENTURY_EN	0x80	/* in REG_HOUR */
#	define DS1340_BIT_CENTURY	0x40	/* in REG_HOUR */
#define DS1307_REG_WDAY		0x03	/* 01-07 */
55
#	define MCP7941X_BIT_VBATEN	0x08
56 57 58 59 60 61
#define DS1307_REG_MDAY		0x04	/* 01-31 */
#define DS1307_REG_MONTH	0x05	/* 01-12 */
#	define DS1337_BIT_CENTURY	0x80	/* in REG_MONTH */
#define DS1307_REG_YEAR		0x06	/* 00-99 */

/* Other registers (control, status, alarms, trickle charge, NVRAM, etc)
D
David Brownell 已提交
62 63
 * start at 7, and they differ a LOT. Only control and status matter for
 * basic RTC date and time functionality; be careful using them.
64
 */
D
David Brownell 已提交
65
#define DS1307_REG_CONTROL	0x07		/* or ds1338 */
66
#	define DS1307_BIT_OUT		0x80
67
#	define DS1338_BIT_OSF		0x20
68 69 70 71 72
#	define DS1307_BIT_SQWE		0x10
#	define DS1307_BIT_RS1		0x02
#	define DS1307_BIT_RS0		0x01
#define DS1337_REG_CONTROL	0x0e
#	define DS1337_BIT_nEOSC		0x80
73
#	define DS1339_BIT_BBSQI		0x20
W
Wolfram Sang 已提交
74
#	define DS3231_BIT_BBSQW		0x40 /* same as BBSQI */
75 76 77 78 79
#	define DS1337_BIT_RS2		0x10
#	define DS1337_BIT_RS1		0x08
#	define DS1337_BIT_INTCN		0x04
#	define DS1337_BIT_A2IE		0x02
#	define DS1337_BIT_A1IE		0x01
D
David Brownell 已提交
80 81 82 83 84
#define DS1340_REG_CONTROL	0x07
#	define DS1340_BIT_OUT		0x80
#	define DS1340_BIT_FT		0x40
#	define DS1340_BIT_CALIB_SIGN	0x20
#	define DS1340_M_CALIBRATION	0x1f
85 86
#define DS1340_REG_FLAG		0x09
#	define DS1340_BIT_OSF		0x80
87 88 89 90
#define DS1337_REG_STATUS	0x0f
#	define DS1337_BIT_OSF		0x80
#	define DS1337_BIT_A2I		0x02
#	define DS1337_BIT_A1I		0x01
91
#define DS1339_REG_ALARM1_SECS	0x07
92 93
#define DS1339_REG_TRICKLE	0x10

94 95 96 97 98 99
#define RX8025_REG_CTRL1	0x0e
#	define RX8025_BIT_2412		0x20
#define RX8025_REG_CTRL2	0x0f
#	define RX8025_BIT_PON		0x10
#	define RX8025_BIT_VDET		0x40
#	define RX8025_BIT_XST		0x20
100 101 102


struct ds1307 {
J
Joakim Tjernlund 已提交
103
	u8			offset; /* register's offset */
104
	u8			regs[11];
105
	enum ds_type		type;
106 107 108
	unsigned long		flags;
#define HAS_NVRAM	0		/* bit 0 == sysfs file active */
#define HAS_ALARM	1		/* bit 1 == irq claimed */
D
David Brownell 已提交
109
	struct i2c_client	*client;
110
	struct rtc_device	*rtc;
111
	struct work_struct	work;
112
	s32 (*read_block_data)(const struct i2c_client *client, u8 command,
E
Ed Swierk 已提交
113
			       u8 length, u8 *values);
114
	s32 (*write_block_data)(const struct i2c_client *client, u8 command,
E
Ed Swierk 已提交
115
				u8 length, const u8 *values);
116 117
};

D
David Brownell 已提交
118 119 120 121 122
struct chip_desc {
	unsigned		nvram56:1;
	unsigned		alarm:1;
};

123 124
static const struct chip_desc chips[] = {
[ds_1307] = {
D
David Brownell 已提交
125
	.nvram56	= 1,
126 127
},
[ds_1337] = {
D
David Brownell 已提交
128
	.alarm		= 1,
129 130
},
[ds_1338] = {
D
David Brownell 已提交
131
	.nvram56	= 1,
132 133
},
[ds_1339] = {
D
David Brownell 已提交
134
	.alarm		= 1,
135 136 137
},
[ds_1340] = {
},
W
Wolfram Sang 已提交
138 139 140
[ds_3231] = {
	.alarm		= 1,
},
141
[m41t00] = {
142
},
143 144
[mcp7941x] = {
},
145
[rx_8025] = {
D
David Brownell 已提交
146 147
}, };

148 149 150 151 152
static const struct i2c_device_id ds1307_id[] = {
	{ "ds1307", ds_1307 },
	{ "ds1337", ds_1337 },
	{ "ds1338", ds_1338 },
	{ "ds1339", ds_1339 },
J
Joakim Tjernlund 已提交
153
	{ "ds1388", ds_1388 },
154
	{ "ds1340", ds_1340 },
W
Wolfram Sang 已提交
155
	{ "ds3231", ds_3231 },
156
	{ "m41t00", m41t00 },
157
	{ "mcp7941x", mcp7941x },
158
	{ "pt7c4338", ds_1307 },
159
	{ "rx8025", rx_8025 },
160 161 162
	{ }
};
MODULE_DEVICE_TABLE(i2c, ds1307_id);
163

164 165
/*----------------------------------------------------------------------*/

E
Ed Swierk 已提交
166 167
#define BLOCK_DATA_MAX_TRIES 10

168 169
static s32 ds1307_read_block_data_once(const struct i2c_client *client,
				       u8 command, u8 length, u8 *values)
E
Ed Swierk 已提交
170 171 172 173 174 175 176 177 178 179 180 181
{
	s32 i, data;

	for (i = 0; i < length; i++) {
		data = i2c_smbus_read_byte_data(client, command + i);
		if (data < 0)
			return data;
		values[i] = data;
	}
	return i;
}

182
static s32 ds1307_read_block_data(const struct i2c_client *client, u8 command,
E
Ed Swierk 已提交
183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207
				  u8 length, u8 *values)
{
	u8 oldvalues[I2C_SMBUS_BLOCK_MAX];
	s32 ret;
	int tries = 0;

	dev_dbg(&client->dev, "ds1307_read_block_data (length=%d)\n", length);
	ret = ds1307_read_block_data_once(client, command, length, values);
	if (ret < 0)
		return ret;
	do {
		if (++tries > BLOCK_DATA_MAX_TRIES) {
			dev_err(&client->dev,
				"ds1307_read_block_data failed\n");
			return -EIO;
		}
		memcpy(oldvalues, values, length);
		ret = ds1307_read_block_data_once(client, command, length,
						  values);
		if (ret < 0)
			return ret;
	} while (memcmp(oldvalues, values, length));
	return length;
}

208
static s32 ds1307_write_block_data(const struct i2c_client *client, u8 command,
E
Ed Swierk 已提交
209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238
				   u8 length, const u8 *values)
{
	u8 currvalues[I2C_SMBUS_BLOCK_MAX];
	int tries = 0;

	dev_dbg(&client->dev, "ds1307_write_block_data (length=%d)\n", length);
	do {
		s32 i, ret;

		if (++tries > BLOCK_DATA_MAX_TRIES) {
			dev_err(&client->dev,
				"ds1307_write_block_data failed\n");
			return -EIO;
		}
		for (i = 0; i < length; i++) {
			ret = i2c_smbus_write_byte_data(client, command + i,
							values[i]);
			if (ret < 0)
				return ret;
		}
		ret = ds1307_read_block_data_once(client, command, length,
						  currvalues);
		if (ret < 0)
			return ret;
	} while (memcmp(currvalues, values, length));
	return length;
}

/*----------------------------------------------------------------------*/

239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297
/*
 * The IRQ logic includes a "real" handler running in IRQ context just
 * long enough to schedule this workqueue entry.   We need a task context
 * to talk to the RTC, since I2C I/O calls require that; and disable the
 * IRQ until we clear its status on the chip, so that this handler can
 * work with any type of triggering (not just falling edge).
 *
 * The ds1337 and ds1339 both have two alarms, but we only use the first
 * one (with a "seconds" field).  For ds1337 we expect nINTA is our alarm
 * signal; ds1339 chips have only one alarm signal.
 */
static void ds1307_work(struct work_struct *work)
{
	struct ds1307		*ds1307;
	struct i2c_client	*client;
	struct mutex		*lock;
	int			stat, control;

	ds1307 = container_of(work, struct ds1307, work);
	client = ds1307->client;
	lock = &ds1307->rtc->ops_lock;

	mutex_lock(lock);
	stat = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
	if (stat < 0)
		goto out;

	if (stat & DS1337_BIT_A1I) {
		stat &= ~DS1337_BIT_A1I;
		i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, stat);

		control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
		if (control < 0)
			goto out;

		control &= ~DS1337_BIT_A1IE;
		i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);

		rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
	}

out:
	if (test_bit(HAS_ALARM, &ds1307->flags))
		enable_irq(client->irq);
	mutex_unlock(lock);
}

static irqreturn_t ds1307_irq(int irq, void *dev_id)
{
	struct i2c_client	*client = dev_id;
	struct ds1307		*ds1307 = i2c_get_clientdata(client);

	disable_irq_nosync(irq);
	schedule_work(&ds1307->work);
	return IRQ_HANDLED;
}

/*----------------------------------------------------------------------*/

298 299 300 301 302
static int ds1307_get_time(struct device *dev, struct rtc_time *t)
{
	struct ds1307	*ds1307 = dev_get_drvdata(dev);
	int		tmp;

D
David Brownell 已提交
303
	/* read the RTC date and time registers all at once */
E
Ed Swierk 已提交
304
	tmp = ds1307->read_block_data(ds1307->client,
J
Joakim Tjernlund 已提交
305
		ds1307->offset, 7, ds1307->regs);
306
	if (tmp != 7) {
307 308 309 310 311 312 313 314 315 316 317
		dev_err(dev, "%s error %d\n", "read", tmp);
		return -EIO;
	}

	dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n",
			"read",
			ds1307->regs[0], ds1307->regs[1],
			ds1307->regs[2], ds1307->regs[3],
			ds1307->regs[4], ds1307->regs[5],
			ds1307->regs[6]);

A
Adrian Bunk 已提交
318 319
	t->tm_sec = bcd2bin(ds1307->regs[DS1307_REG_SECS] & 0x7f);
	t->tm_min = bcd2bin(ds1307->regs[DS1307_REG_MIN] & 0x7f);
320
	tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f;
A
Adrian Bunk 已提交
321 322 323
	t->tm_hour = bcd2bin(tmp);
	t->tm_wday = bcd2bin(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1;
	t->tm_mday = bcd2bin(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
324
	tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f;
A
Adrian Bunk 已提交
325
	t->tm_mon = bcd2bin(tmp) - 1;
326 327

	/* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */
A
Adrian Bunk 已提交
328
	t->tm_year = bcd2bin(ds1307->regs[DS1307_REG_YEAR]) + 100;
329 330 331 332 333 334 335

	dev_dbg(dev, "%s secs=%d, mins=%d, "
		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
		"read", t->tm_sec, t->tm_min,
		t->tm_hour, t->tm_mday,
		t->tm_mon, t->tm_year, t->tm_wday);

D
David Brownell 已提交
336 337
	/* initial clock setting can be undefined */
	return rtc_valid_tm(t);
338 339 340 341 342 343 344 345 346 347 348
}

static int ds1307_set_time(struct device *dev, struct rtc_time *t)
{
	struct ds1307	*ds1307 = dev_get_drvdata(dev);
	int		result;
	int		tmp;
	u8		*buf = ds1307->regs;

	dev_dbg(dev, "%s secs=%d, mins=%d, "
		"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
J
Jeff Garzik 已提交
349 350 351
		"write", t->tm_sec, t->tm_min,
		t->tm_hour, t->tm_mday,
		t->tm_mon, t->tm_year, t->tm_wday);
352

A
Adrian Bunk 已提交
353 354 355 356 357 358
	buf[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
	buf[DS1307_REG_MIN] = bin2bcd(t->tm_min);
	buf[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
	buf[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
	buf[DS1307_REG_MDAY] = bin2bcd(t->tm_mday);
	buf[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1);
359 360 361

	/* assume 20YY not 19YY */
	tmp = t->tm_year - 100;
A
Adrian Bunk 已提交
362
	buf[DS1307_REG_YEAR] = bin2bcd(tmp);
363

364 365 366
	switch (ds1307->type) {
	case ds_1337:
	case ds_1339:
W
Wolfram Sang 已提交
367
	case ds_3231:
368
		buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY;
369 370
		break;
	case ds_1340:
371 372
		buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN
				| DS1340_BIT_CENTURY;
373
		break;
374 375 376 377
	case mcp7941x:
		buf[DS1307_REG_SECS] |= MCP7941X_BIT_ST;
		buf[DS1307_REG_WDAY] |= MCP7941X_BIT_VBATEN;
		break;
378 379 380
	default:
		break;
	}
381 382 383 384 385

	dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n",
		"write", buf[0], buf[1], buf[2], buf[3],
		buf[4], buf[5], buf[6]);

J
Joakim Tjernlund 已提交
386 387
	result = ds1307->write_block_data(ds1307->client,
		ds1307->offset, 7, buf);
388 389 390
	if (result < 0) {
		dev_err(dev, "%s error %d\n", "write", result);
		return result;
391 392 393 394
	}
	return 0;
}

395
static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
396 397 398 399 400 401 402 403 404
{
	struct i2c_client       *client = to_i2c_client(dev);
	struct ds1307		*ds1307 = i2c_get_clientdata(client);
	int			ret;

	if (!test_bit(HAS_ALARM, &ds1307->flags))
		return -EINVAL;

	/* read all ALARM1, ALARM2, and status registers at once */
E
Ed Swierk 已提交
405
	ret = ds1307->read_block_data(client,
406 407
			DS1339_REG_ALARM1_SECS, 9, ds1307->regs);
	if (ret != 9) {
408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445
		dev_err(dev, "%s error %d\n", "alarm read", ret);
		return -EIO;
	}

	dev_dbg(dev, "%s: %02x %02x %02x %02x, %02x %02x %02x, %02x %02x\n",
			"alarm read",
			ds1307->regs[0], ds1307->regs[1],
			ds1307->regs[2], ds1307->regs[3],
			ds1307->regs[4], ds1307->regs[5],
			ds1307->regs[6], ds1307->regs[7],
			ds1307->regs[8]);

	/* report alarm time (ALARM1); assume 24 hour and day-of-month modes,
	 * and that all four fields are checked matches
	 */
	t->time.tm_sec = bcd2bin(ds1307->regs[0] & 0x7f);
	t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f);
	t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f);
	t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f);
	t->time.tm_mon = -1;
	t->time.tm_year = -1;
	t->time.tm_wday = -1;
	t->time.tm_yday = -1;
	t->time.tm_isdst = -1;

	/* ... and status */
	t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE);
	t->pending = !!(ds1307->regs[8] & DS1337_BIT_A1I);

	dev_dbg(dev, "%s secs=%d, mins=%d, "
		"hours=%d, mday=%d, enabled=%d, pending=%d\n",
		"alarm read", t->time.tm_sec, t->time.tm_min,
		t->time.tm_hour, t->time.tm_mday,
		t->enabled, t->pending);

	return 0;
}

446
static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463
{
	struct i2c_client       *client = to_i2c_client(dev);
	struct ds1307		*ds1307 = i2c_get_clientdata(client);
	unsigned char		*buf = ds1307->regs;
	u8			control, status;
	int			ret;

	if (!test_bit(HAS_ALARM, &ds1307->flags))
		return -EINVAL;

	dev_dbg(dev, "%s secs=%d, mins=%d, "
		"hours=%d, mday=%d, enabled=%d, pending=%d\n",
		"alarm set", t->time.tm_sec, t->time.tm_min,
		t->time.tm_hour, t->time.tm_mday,
		t->enabled, t->pending);

	/* read current status of both alarms and the chip */
E
Ed Swierk 已提交
464
	ret = ds1307->read_block_data(client,
465 466
			DS1339_REG_ALARM1_SECS, 9, buf);
	if (ret != 9) {
467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498
		dev_err(dev, "%s error %d\n", "alarm write", ret);
		return -EIO;
	}
	control = ds1307->regs[7];
	status = ds1307->regs[8];

	dev_dbg(dev, "%s: %02x %02x %02x %02x, %02x %02x %02x, %02x %02x\n",
			"alarm set (old status)",
			ds1307->regs[0], ds1307->regs[1],
			ds1307->regs[2], ds1307->regs[3],
			ds1307->regs[4], ds1307->regs[5],
			ds1307->regs[6], control, status);

	/* set ALARM1, using 24 hour and day-of-month modes */
	buf[0] = bin2bcd(t->time.tm_sec);
	buf[1] = bin2bcd(t->time.tm_min);
	buf[2] = bin2bcd(t->time.tm_hour);
	buf[3] = bin2bcd(t->time.tm_mday);

	/* set ALARM2 to non-garbage */
	buf[4] = 0;
	buf[5] = 0;
	buf[6] = 0;

	/* optionally enable ALARM1 */
	buf[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE);
	if (t->enabled) {
		dev_dbg(dev, "alarm IRQ armed\n");
		buf[7] |= DS1337_BIT_A1IE;	/* only ALARM1 is used */
	}
	buf[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I);

E
Ed Swierk 已提交
499
	ret = ds1307->write_block_data(client,
500 501
			DS1339_REG_ALARM1_SECS, 9, buf);
	if (ret < 0) {
502
		dev_err(dev, "can't set alarm time\n");
503
		return ret;
504 505 506 507 508
	}

	return 0;
}

509
static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled)
510 511 512 513 514
{
	struct i2c_client	*client = to_i2c_client(dev);
	struct ds1307		*ds1307 = i2c_get_clientdata(client);
	int			ret;

515 516
	if (!test_bit(HAS_ALARM, &ds1307->flags))
		return -ENOTTY;
517

518 519 520
	ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
	if (ret < 0)
		return ret;
521

522
	if (enabled)
523
		ret |= DS1337_BIT_A1IE;
524 525
	else
		ret &= ~DS1337_BIT_A1IE;
526

527 528 529
	ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, ret);
	if (ret < 0)
		return ret;
530 531 532 533

	return 0;
}

534
static const struct rtc_class_ops ds13xx_rtc_ops = {
535 536
	.read_time	= ds1307_get_time,
	.set_time	= ds1307_set_time,
537 538
	.read_alarm	= ds1337_read_alarm,
	.set_alarm	= ds1337_set_alarm,
539
	.alarm_irq_enable = ds1307_alarm_irq_enable,
540 541
};

D
David Brownell 已提交
542 543 544 545 546
/*----------------------------------------------------------------------*/

#define NVRAM_SIZE	56

static ssize_t
547 548
ds1307_nvram_read(struct file *filp, struct kobject *kobj,
		struct bin_attribute *attr,
D
David Brownell 已提交
549 550 551 552 553 554
		char *buf, loff_t off, size_t count)
{
	struct i2c_client	*client;
	struct ds1307		*ds1307;
	int			result;

F
frederic Rodo 已提交
555
	client = kobj_to_i2c_client(kobj);
D
David Brownell 已提交
556 557 558 559 560 561 562 563 564
	ds1307 = i2c_get_clientdata(client);

	if (unlikely(off >= NVRAM_SIZE))
		return 0;
	if ((off + count) > NVRAM_SIZE)
		count = NVRAM_SIZE - off;
	if (unlikely(!count))
		return count;

E
Ed Swierk 已提交
565
	result = ds1307->read_block_data(client, 8 + off, count, buf);
566
	if (result < 0)
D
David Brownell 已提交
567
		dev_err(&client->dev, "%s error %d\n", "nvram read", result);
568
	return result;
D
David Brownell 已提交
569 570 571
}

static ssize_t
572 573
ds1307_nvram_write(struct file *filp, struct kobject *kobj,
		struct bin_attribute *attr,
D
David Brownell 已提交
574 575 576
		char *buf, loff_t off, size_t count)
{
	struct i2c_client	*client;
E
Ed Swierk 已提交
577
	struct ds1307		*ds1307;
578
	int			result;
D
David Brownell 已提交
579

F
frederic Rodo 已提交
580
	client = kobj_to_i2c_client(kobj);
E
Ed Swierk 已提交
581
	ds1307 = i2c_get_clientdata(client);
D
David Brownell 已提交
582 583 584 585 586 587 588 589

	if (unlikely(off >= NVRAM_SIZE))
		return -EFBIG;
	if ((off + count) > NVRAM_SIZE)
		count = NVRAM_SIZE - off;
	if (unlikely(!count))
		return count;

E
Ed Swierk 已提交
590
	result = ds1307->write_block_data(client, 8 + off, count, buf);
591 592 593 594 595
	if (result < 0) {
		dev_err(&client->dev, "%s error %d\n", "nvram write", result);
		return result;
	}
	return count;
D
David Brownell 已提交
596 597 598 599 600 601 602 603 604 605 606 607 608 609 610
}

static struct bin_attribute nvram = {
	.attr = {
		.name	= "nvram",
		.mode	= S_IRUGO | S_IWUSR,
	},

	.read	= ds1307_nvram_read,
	.write	= ds1307_nvram_write,
	.size	= NVRAM_SIZE,
};

/*----------------------------------------------------------------------*/

611 612
static struct i2c_driver ds1307_driver;

613 614
static int __devinit ds1307_probe(struct i2c_client *client,
				  const struct i2c_device_id *id)
615 616 617 618
{
	struct ds1307		*ds1307;
	int			err = -ENODEV;
	int			tmp;
619
	const struct chip_desc	*chip = &chips[id->driver_data];
620
	struct i2c_adapter	*adapter = to_i2c_adapter(client->dev.parent);
621
	int			want_irq = false;
622
	unsigned char		*buf;
W
Wolfram Sang 已提交
623 624 625 626 627
	static const int	bbsqi_bitpos[] = {
		[ds_1337] = 0,
		[ds_1339] = DS1339_BIT_BBSQI,
		[ds_3231] = DS3231_BIT_BBSQW,
	};
628

E
Ed Swierk 已提交
629 630
	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)
	    && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
631 632 633 634
		return -EIO;

	if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL)))
		return -ENOMEM;
D
David Brownell 已提交
635

636
	i2c_set_clientdata(client, ds1307);
J
Joakim Tjernlund 已提交
637 638 639 640 641

	ds1307->client	= client;
	ds1307->type	= id->driver_data;
	ds1307->offset	= 0;

642
	buf = ds1307->regs;
E
Ed Swierk 已提交
643 644 645 646 647 648 649
	if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
		ds1307->read_block_data = i2c_smbus_read_i2c_block_data;
		ds1307->write_block_data = i2c_smbus_write_i2c_block_data;
	} else {
		ds1307->read_block_data = ds1307_read_block_data;
		ds1307->write_block_data = ds1307_write_block_data;
	}
D
David Brownell 已提交
650 651 652 653

	switch (ds1307->type) {
	case ds_1337:
	case ds_1339:
W
Wolfram Sang 已提交
654
	case ds_3231:
655 656 657 658 659
		/* has IRQ? */
		if (ds1307->client->irq > 0 && chip->alarm) {
			INIT_WORK(&ds1307->work, ds1307_work);
			want_irq = true;
		}
660
		/* get registers that the "rtc" read below won't read... */
E
Ed Swierk 已提交
661
		tmp = ds1307->read_block_data(ds1307->client,
662
				DS1337_REG_CONTROL, 2, buf);
663 664 665 666 667 668
		if (tmp != 2) {
			pr_debug("read error %d\n", tmp);
			err = -EIO;
			goto exit_free;
		}

669 670
		/* oscillator off?  turn it on, so clock can tick. */
		if (ds1307->regs[0] & DS1337_BIT_nEOSC)
671 672 673
			ds1307->regs[0] &= ~DS1337_BIT_nEOSC;

		/* Using IRQ?  Disable the square wave and both alarms.
W
Wolfram Sang 已提交
674 675
		 * For some variants, be sure alarms can trigger when we're
		 * running on Vbackup (BBSQI/BBSQW)
676 677
		 */
		if (want_irq) {
W
Wolfram Sang 已提交
678 679
			ds1307->regs[0] |= DS1337_BIT_INTCN
					| bbsqi_bitpos[ds1307->type];
680 681 682 683 684
			ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
		}

		i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
							ds1307->regs[0]);
685 686 687 688 689 690

		/* oscillator fault?  clear flag, and warn */
		if (ds1307->regs[1] & DS1337_BIT_OSF) {
			i2c_smbus_write_byte_data(client, DS1337_REG_STATUS,
				ds1307->regs[1] & ~DS1337_BIT_OSF);
			dev_warn(&client->dev, "SET TIME!\n");
691
		}
D
David Brownell 已提交
692
		break;
693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758

	case rx_8025:
		tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
				RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
		if (tmp != 2) {
			pr_debug("read error %d\n", tmp);
			err = -EIO;
			goto exit_free;
		}

		/* oscillator off?  turn it on, so clock can tick. */
		if (!(ds1307->regs[1] & RX8025_BIT_XST)) {
			ds1307->regs[1] |= RX8025_BIT_XST;
			i2c_smbus_write_byte_data(client,
						  RX8025_REG_CTRL2 << 4 | 0x08,
						  ds1307->regs[1]);
			dev_warn(&client->dev,
				 "oscillator stop detected - SET TIME!\n");
		}

		if (ds1307->regs[1] & RX8025_BIT_PON) {
			ds1307->regs[1] &= ~RX8025_BIT_PON;
			i2c_smbus_write_byte_data(client,
						  RX8025_REG_CTRL2 << 4 | 0x08,
						  ds1307->regs[1]);
			dev_warn(&client->dev, "power-on detected\n");
		}

		if (ds1307->regs[1] & RX8025_BIT_VDET) {
			ds1307->regs[1] &= ~RX8025_BIT_VDET;
			i2c_smbus_write_byte_data(client,
						  RX8025_REG_CTRL2 << 4 | 0x08,
						  ds1307->regs[1]);
			dev_warn(&client->dev, "voltage drop detected\n");
		}

		/* make sure we are running in 24hour mode */
		if (!(ds1307->regs[0] & RX8025_BIT_2412)) {
			u8 hour;

			/* switch to 24 hour mode */
			i2c_smbus_write_byte_data(client,
						  RX8025_REG_CTRL1 << 4 | 0x08,
						  ds1307->regs[0] |
						  RX8025_BIT_2412);

			tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
					RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
			if (tmp != 2) {
				pr_debug("read error %d\n", tmp);
				err = -EIO;
				goto exit_free;
			}

			/* correct hour */
			hour = bcd2bin(ds1307->regs[DS1307_REG_HOUR]);
			if (hour == 12)
				hour = 0;
			if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
				hour += 12;

			i2c_smbus_write_byte_data(client,
						  DS1307_REG_HOUR << 4 | 0x08,
						  hour);
		}
		break;
J
Joakim Tjernlund 已提交
759 760 761
	case ds_1388:
		ds1307->offset = 1; /* Seconds starts at 1 */
		break;
D
David Brownell 已提交
762 763 764
	default:
		break;
	}
765 766 767

read_rtc:
	/* read RTC registers */
768
	tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
769
	if (tmp != 8) {
770 771 772 773 774 775 776 777 778 779
		pr_debug("read error %d\n", tmp);
		err = -EIO;
		goto exit_free;
	}

	/* minimal sanity checking; some chips (like DS1340) don't
	 * specify the extra bits as must-be-zero, but there are
	 * still a few values that are clearly out-of-range.
	 */
	tmp = ds1307->regs[DS1307_REG_SECS];
D
David Brownell 已提交
780 781 782
	switch (ds1307->type) {
	case ds_1307:
	case m41t00:
783
		/* clock halted?  turn it on, so clock can tick. */
D
David Brownell 已提交
784
		if (tmp & DS1307_BIT_CH) {
785 786
			i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
			dev_warn(&client->dev, "SET TIME!\n");
D
David Brownell 已提交
787
			goto read_rtc;
788
		}
D
David Brownell 已提交
789
		break;
790 791
	case ds_1338:
		/* clock halted?  turn it on, so clock can tick. */
D
David Brownell 已提交
792
		if (tmp & DS1307_BIT_CH)
793 794 795 796 797
			i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);

		/* oscillator fault?  clear flag, and warn */
		if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) {
			i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL,
798
					ds1307->regs[DS1307_REG_CONTROL]
799 800 801 802
					& ~DS1338_BIT_OSF);
			dev_warn(&client->dev, "SET TIME!\n");
			goto read_rtc;
		}
D
David Brownell 已提交
803
		break;
F
frederic Rodo 已提交
804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820
	case ds_1340:
		/* clock halted?  turn it on, so clock can tick. */
		if (tmp & DS1340_BIT_nEOSC)
			i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);

		tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG);
		if (tmp < 0) {
			pr_debug("read error %d\n", tmp);
			err = -EIO;
			goto exit_free;
		}

		/* oscillator fault?  clear flag, and warn */
		if (tmp & DS1340_BIT_OSF) {
			i2c_smbus_write_byte_data(client, DS1340_REG_FLAG, 0);
			dev_warn(&client->dev, "SET TIME!\n");
		}
821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837
		break;
	case mcp7941x:
		/* make sure that the backup battery is enabled */
		if (!(ds1307->regs[DS1307_REG_WDAY] & MCP7941X_BIT_VBATEN)) {
			i2c_smbus_write_byte_data(client, DS1307_REG_WDAY,
					ds1307->regs[DS1307_REG_WDAY]
					| MCP7941X_BIT_VBATEN);
		}

		/* clock halted?  turn it on, so clock can tick. */
		if (!(tmp & MCP7941X_BIT_ST)) {
			i2c_smbus_write_byte_data(client, DS1307_REG_SECS,
					MCP7941X_BIT_ST);
			dev_warn(&client->dev, "SET TIME!\n");
			goto read_rtc;
		}

F
frederic Rodo 已提交
838
		break;
839
	case rx_8025:
840 841
	case ds_1337:
	case ds_1339:
J
Joakim Tjernlund 已提交
842
	case ds_1388:
W
Wolfram Sang 已提交
843
	case ds_3231:
D
David Brownell 已提交
844
		break;
845
	}
D
David Brownell 已提交
846

847
	tmp = ds1307->regs[DS1307_REG_HOUR];
848 849 850 851 852 853 854
	switch (ds1307->type) {
	case ds_1340:
	case m41t00:
		/* NOTE: ignores century bits; fix before deploying
		 * systems that will run through year 2100.
		 */
		break;
855 856
	case rx_8025:
		break;
857 858 859 860 861 862 863
	default:
		if (!(tmp & DS1307_BIT_12HR))
			break;

		/* Be sure we're in 24 hour mode.  Multi-master systems
		 * take note...
		 */
A
Adrian Bunk 已提交
864
		tmp = bcd2bin(tmp & 0x1f);
865 866 867 868
		if (tmp == 12)
			tmp = 0;
		if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
			tmp += 12;
869
		i2c_smbus_write_byte_data(client,
870
				ds1307->offset + DS1307_REG_HOUR,
A
Adrian Bunk 已提交
871
				bin2bcd(tmp));
872 873 874 875 876 877 878 879
	}

	ds1307->rtc = rtc_device_register(client->name, &client->dev,
				&ds13xx_rtc_ops, THIS_MODULE);
	if (IS_ERR(ds1307->rtc)) {
		err = PTR_ERR(ds1307->rtc);
		dev_err(&client->dev,
			"unable to register the class device\n");
880
		goto exit_free;
881 882
	}

883
	if (want_irq) {
884
		err = request_irq(client->irq, ds1307_irq, IRQF_SHARED,
885 886 887 888 889 890
			  ds1307->rtc->name, client);
		if (err) {
			dev_err(&client->dev,
				"unable to request IRQ!\n");
			goto exit_irq;
		}
891 892

		device_set_wakeup_capable(&client->dev, 1);
893 894 895 896
		set_bit(HAS_ALARM, &ds1307->flags);
		dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
	}

D
David Brownell 已提交
897 898 899
	if (chip->nvram56) {
		err = sysfs_create_bin_file(&client->dev.kobj, &nvram);
		if (err == 0) {
900
			set_bit(HAS_NVRAM, &ds1307->flags);
D
David Brownell 已提交
901 902 903 904
			dev_info(&client->dev, "56 bytes nvram\n");
		}
	}

905 906
	return 0;

907
exit_irq:
908
	rtc_device_unregister(ds1307->rtc);
909 910 911 912 913
exit_free:
	kfree(ds1307);
	return err;
}

914
static int __devexit ds1307_remove(struct i2c_client *client)
915
{
916 917 918 919 920 921
	struct ds1307		*ds1307 = i2c_get_clientdata(client);

	if (test_and_clear_bit(HAS_ALARM, &ds1307->flags)) {
		free_irq(client->irq, client);
		cancel_work_sync(&ds1307->work);
	}
922

923
	if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags))
D
David Brownell 已提交
924 925
		sysfs_remove_bin_file(&client->dev.kobj, &nvram);

926 927 928 929 930 931 932
	rtc_device_unregister(ds1307->rtc);
	kfree(ds1307);
	return 0;
}

static struct i2c_driver ds1307_driver = {
	.driver = {
933
		.name	= "rtc-ds1307",
934 935
		.owner	= THIS_MODULE,
	},
936 937
	.probe		= ds1307_probe,
	.remove		= __devexit_p(ds1307_remove),
938
	.id_table	= ds1307_id,
939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954
};

static int __init ds1307_init(void)
{
	return i2c_add_driver(&ds1307_driver);
}
module_init(ds1307_init);

static void __exit ds1307_exit(void)
{
	i2c_del_driver(&ds1307_driver);
}
module_exit(ds1307_exit);

MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips");
MODULE_LICENSE("GPL");