- 31 8月, 2016 2 次提交
-
-
由 Greg Kurz 提交于
Empty path components don't make sense for most commands and may cause undefined behavior, depending on the backend. Also, the walk request described in the 9P spec [1] clearly shows that the client is supposed to send individual path components: the official linux client never sends portions of path containing the / character for example. Moreover, the 9P spec [2] also states that a system can decide to restrict the set of supported characters used in path components, with an explicit mention "to remove slashes from name components". This patch introduces a new name_is_illegal() helper that checks the names sent by the client are not empty and don't contain unwanted chars. Since 9pfs is only supported on linux hosts, only the / character is checked at the moment. When support for other hosts (AKA. win32) is added, other chars may need to be blacklisted as well. If a client sends an illegal path component, the request will fail and ENOENT is returned to the client. [1] http://man.cat-v.org/plan_9/5/walk [2] http://man.cat-v.org/plan_9/5/introSuggested-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NGreg Kurz <groug@kaod.org> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
* pc-bios/optionrom/Makefile fix for -O0 * revert socket_connect change # gpg: Signature made Tue 30 Aug 2016 15:36:59 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: optionrom: cope with multiple -O options Revert "Change net/socket.c to use socket_*() functions" Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 30 8月, 2016 4 次提交
-
-
由 Paolo Bonzini 提交于
Reproducer: CFLAGS="-g3 -O0" ./configure --target-list=aarch64-softmmu,arm-softmmu --enable-vhost-net --enable-virtfs Here CFLAGS ends up with "-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 ... -g3 -O0" and pc-bios/optionrom/Makefile forgets to add the -O2 it needs. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Since commit 7e844959, the socket connect code is blocking, because calling socket_connect() without callback is blocking. This reverts the commit. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Christian Borntraeger 提交于
tb_flush does all kind of things, which are very tcg specific. As it is called from some places even for KVM (e.g. gdb server) it is better to detect these cases and do an early exit. This also fixes a crash in the gdb server that was triggered by commit 909eaac9 ("tb hash: track translated blocks with qht"). Suggested-by: NPaolo Bonzini <pbonzini@redhat.com> Reported-by: NRichard Henderson <rth@twiddle.net> Reported-by: NBrent Baccala <cosine@freesoft.org> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Message-id: 1472148686-39841-1-git-send-email-borntraeger@de.ibm.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Daniel P. Berrange 提交于
In previous commit commit c7628bff Author: Gerd Hoffmann <kraxel@redhat.com> Date: Fri Oct 30 12:10:09 2015 +0100 vnc: only alloc server surface with clients connected the VNC server was changed so that the 'vd->server' pixman image was only allocated when a client is connected. Since then if a client disconnects and then reconnects to the VNC server all they will see is a black screen until they do something that triggers a refresh. On a graphical desktop this is not often noticed since there's many things going on which cause a refresh. On a plain text console it is really obvious since nothing refreshes frequently. The problem is that the VNC server didn't update the guest dirty bitmap, so still believes its server image is in sync with the guest contents. To fix this we must explicitly mark the entire guest desktop as dirty after re-creating the server surface. Move this logic into vnc_update_server_surface() so it is guaranteed to be call in all code paths that re-create the surface instead of only in vnc_dpy_switch() Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Tested-by: NPeter Lieven <pl@kamp.de> Message-id: 1471365032-18096-1-git-send-email-berrange@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 25 8月, 2016 1 次提交
-
-
由 Peter Maydell 提交于
virtio: fixes some bugfixes for virtio balloon is still broken wrt migration Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 23 Aug 2016 17:33:11 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: virtio: decrement vq->inuse in virtqueue_discard() virtio: recalculate vq->inuse after migration Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 24 8月, 2016 3 次提交
-
-
由 Ed Maste 提交于
Must include "qemu-version.h" for the QEMU_PKGVERSION definition. Signed-off-by: NEd Maste <emaste@freebsd.org> Message-id: 1471877833-52343-1-git-send-email-emaste@freebsd.org Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Stefan Hajnoczi 提交于
virtqueue_discard() moves vq->last_avail_idx back so the element can be popped again. It's necessary to decrement vq->inuse to avoid "leaking" the element count. Cc: qemu-stable@nongnu.org Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Stefan Hajnoczi 提交于
The vq->inuse field is not migrated. Many devices don't hold VirtQueueElements across migration so it doesn't matter that vq->inuse starts at 0 on the destination QEMU. At least virtio-serial, virtio-blk, and virtio-balloon migrate while holding VirtQueueElements. For these devices we need to recalculate vq->inuse upon load so the value is correct. Cc: qemu-stable@nongnu.org Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 22 8月, 2016 4 次提交
-
-
由 Peter Maydell 提交于
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
# gpg: Signature made Mon 22 Aug 2016 09:06:32 BST # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: e1000e: remove internal interrupt flag slirp: fix segv when init failed Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Cao jin 提交于
Commit 66bf7d58 removed internal msi state flag E1000E_USE_MSI, E1000E_USE_MSIX is not necessary too, remove it now. And interrupt flag field intr_state also can be removed now. CC: Dmitry Fleytman <dmitry@daynix.com> CC: Jason Wang <jasowang@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Marcel Apfelbaum <marcel@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Acked-by: NDmitry Fleytman <dmitry@daynix.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Marc-André Lureau 提交于
Since commit f6c2e66a, slirp uses an exit notifier to call slirp_smb_cleanup. However, if init() failed, the notifier isn't added, and removing it will fail: ==18447== Invalid write of size 8 ==18447== at 0x7EF2B5: notifier_remove (notify.c:32) ==18447== by 0x48E80C: qemu_remove_exit_notifier (vl.c:2661) ==18447== by 0x6A2187: net_slirp_cleanup (slirp.c:134) ==18447== by 0x69419D: qemu_cleanup_net_client (net.c:338) ==18447== by 0x69445B: qemu_del_net_client (net.c:401) ==18447== by 0x6A2B81: net_slirp_init (slirp.c:366) ==18447== by 0x6A4241: net_init_slirp (slirp.c:865) ==18447== by 0x695C6D: net_client_init1 (net.c:1051) ==18447== by 0x695F6E: net_client_init (net.c:1108) ==18447== by 0x696DBA: net_init_netdev (net.c:1498) ==18447== by 0x7F1F99: qemu_opts_foreach (qemu-option.c:1116) ==18447== by 0x696E60: net_init_clients (net.c:1516) ==18447== Address 0x0 is not stack'd, malloc'd or (recently) free'd Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
- 19 8月, 2016 4 次提交
-
-
由 Sascha Silbe 提交于
Since f6880b7f [qemu-log: support simple pid substitution for logs], test-logging creates files with hard-coded names in /tmp. In the best case, this prevents multiple developers from running "make check" on the same machine. In the worst case, it allows for symlink attacks, enabling an attacker to overwrite files that are writable to the developer running "make check". Instead of hard-coding the paths, create a temporary directory using g_dir_make_tmp() and clean it up afterwards. Fixes: f6880b7f ("qemu-log: support simple pid substitution for logs") Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com> Message-id: 1471545963-11720-3-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Sascha Silbe 提交于
We're going to make use of g_dir_make_tmp() in test-logging. Provide a compatibility implementation of it for glib < 2.30. May behave differently in some edge cases (e.g. pattern only at the end of the template, the file name is not part of the error message), but good enough in practice. Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com> Message-id: 1471545963-11720-2-git-send-email-silbe@linux.vnet.ibm.com [PMM: removed variable "template" which caused compilation failures when C++ files include glib-compat.h] Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Michal Privoznik 提交于
In 9c371467 I've tried to fix a broken build with older linux-headers. However, I didn't do it properly. The solution implemented here is to grab the enums that caused the problem initially, and rename their values so that they are "QEMU_" prefixed. In order to guarantee matching values with actual enums from linux-headers, the enums are seeded with starting values from the original enums. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NLaurent Vivier <laurent@vivier.eu> Message-id: 75c14d6e8a97c4ff3931d69c13eab7376968d8b4.1471593869.git.mprivozn@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Michal Privoznik 提交于
The fix I've made there was wrong. I mean, basically what I did there was equivalent to: #if 0 some code; #endif This reverts commit 9c371467. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NLaurent Vivier <laurent@vivier.eu> Message-id: 40d61349e445c1ad5fef795da704bf7ed6e19c86.1471593869.git.mprivozn@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 18 8月, 2016 7 次提交
-
-
由 Peter Maydell 提交于
# gpg: Signature made Thu 18 Aug 2016 14:39:31 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: block: fix possible reorder of flush operations block: fix deadlock in bdrv_co_flush Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Denis V. Lunev 提交于
This patch reduce CPU usage of flush operations a bit. When we have one flush completed we should kick only next operation. We should not start all pending operations in the hope that they will go back to wait on wait_queue. Also there is a technical possibility that requests will get reordered with the previous approach. After wakeup all requests are removed from the wait queue. They become active and they are processed one-by-one adding to the wait queue in the same order. Though new flush can arrive while all requests are not put into the queue. Signed-off-by: NDenis V. Lunev <den@openvz.org> Tested-by: NEvgeny Yakovlev <eyakovlev@virtuozzo.com> Signed-off-by: NEvgeny Yakovlev <eyakovlev@virtuozzo.com> Message-id: 1471457214-3994-3-git-send-email-den@openvz.org CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Fam Zheng <famz@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Evgeny Yakovlev 提交于
The following commit commit 3ff2f67a Author: Evgeny Yakovlev <eyakovlev@virtuozzo.com> Date: Mon Jul 18 22:39:52 2016 +0300 block: ignore flush requests when storage is clean has introduced a regression. There is a problem that it is still possible for 2 requests to execute in non sequential fashion and sometimes this results in a deadlock when bdrv_drain_one/all are called for BDS with such stalled requests. 1. Current flushed_gen and flush_started_gen is 1. 2. Request 1 enters bdrv_co_flush to with write_gen 1 (i.e. the same as flushed_gen). It gets past flushed_gen != flush_started_gen and sets flush_started_gen to 1 (again, the same it was before). 3. Request 1 yields somewhere before exiting bdrv_co_flush 4. Request 2 enters bdrv_co_flush with write_gen 2. It gets past flushed_gen != flush_started_gen and sets flush_started_gen to 2. 5. Request 2 runs to completion and sets flushed_gen to 2 6. Request 1 is resumed, runs to completion and sets flushed_gen to 1. However flush_started_gen is now 2. From here on out flushed_gen is always != to flush_started_gen and all further requests will wait on flush_queue. This change replaces flush_started_gen with an explicitly tracked active flush request. Signed-off-by: NEvgeny Yakovlev <eyakovlev@virtuozzo.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> Message-id: 1471457214-3994-2-git-send-email-den@openvz.org CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Fam Zheng <famz@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Peter Maydell 提交于
# gpg: Signature made Thu 18 Aug 2016 06:36:16 BST # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: net/net: properly handle multiple packets in net_fill_rstate() net: vmxnet: use g_new for pkt initialisation Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Fix 'make docker-test-mingw@fedora' Peter, This is the single patch that stalls patchew's mingw testing. Since it is small and trivial, let's have it in 2.7. Fam # gpg: Signature made Wed 17 Aug 2016 13:13:53 BST # gpg: using RSA key 0xCA35624C6A9171C6 # gpg: Good signature from "Fam Zheng <famz@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6 * remotes/famz/tags/docker-pull-request: curl: Cast fd to int for DPRINTF Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Zhang Chen 提交于
When network is busy, we will receive multiple packets at one time. In that situation, we should keep trying to do the receiving instead of finalizing only the first packet. Signed-off-by: NZhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: NLi Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Li Qiang 提交于
When network transport abstraction layer initialises pkt, the maximum fragmentation count is not checked. This could lead to an integer overflow causing a NULL pointer dereference. Replace g_malloc() with g_new() to catch the multiplication overflow. Reported-by: NLi Qiang <liqiang6-s@360.cn> Signed-off-by: NPrasad J Pandit <pjp@fedoraproject.org> Acked-by: NDmitry Fleytman <dmitry@daynix.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
- 17 8月, 2016 2 次提交
-
-
由 Fam Zheng 提交于
Currently "make docker-test-mingw@fedora" has a warning like: /tmp/qemu-test/src/block/curl.c: In function 'curl_sock_cb': /tmp/qemu-test/src/block/curl.c:172:6: warning: format '%d' expects argument of type 'int', but argument 4 has type 'curl_socket_t {aka long long unsigned int}' DPRINTF("CURL (AIO): Sock action %d on fd %d\n", action, fd); ^ cc1: all warnings being treated as errors Cast to int to suppress it. Signed-off-by: NFam Zheng <famz@redhat.com> Message-Id: <1470027888-24381-1-git-send-email-famz@redhat.com> Reviewed-by: NJohn Snow <jsnow@redhat.com>
-
由 Peter Maydell 提交于
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 16 8月, 2016 13 次提交
-
-
由 Peter Maydell 提交于
The llseek syscall takes two 32-bit arguments, offset_high and offset_low, which must be combined to form a single 64-bit offset. Unfortunately we were combining them with (uint64_t)arg2 << 32) | arg3 and arg3 is a signed type; this meant that when promoting arg3 to a 64-bit type it would be sign-extended. The effect was that if the offset happened to have bit 31 set then this bit would get sign-extended into all of bits 63..32. Explicitly cast arg3 to abi_ulong to avoid the erroneous sign extension. Reported-by: NChanho Park <parkch98@gmail.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Tested-by: NChanho Park <parkch98@gmail.com> Message-id: 1470938379-1133-1-git-send-email-peter.maydell@linaro.org
-
由 Michal Privoznik 提交于
In c5dff280 we tried to make us understand netlink messages more. So we've added a code that does some translation. However, the code assumed linux-headers to be at least version 4.4 of it because most of the symbols there (if not all of them) were added in just that release. This, however, breaks build on systems with older versions of the package. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Message-id: 23806aac6db3baf7e2cdab4c62d6e3468ce6b4dc.1471340849.git.mprivozn@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Marc-André Lureau 提交于
input-send-event is now stable since 6575ccdd. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Message-id: 20160811112041.18616-1-marcandre.lureau@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
target-i386: kernel_irqchip=off fix for KVM # gpg: Signature made Tue 16 Aug 2016 12:55:42 BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-pull-request: target-i386: kvm: Report kvm_pv_unhalt as unsupported w/o kernel_irqchip Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Eduardo Habkost 提交于
The kvm_pv_unhalt feature doesn't work if kernel_irqchip is disabled, so we need to report it as unsupported. Tested-by: NPeter Xu <peterx@redhat.com> Reviewed-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Thomas Huth 提交于
struct arphdr is already used by the system headers on OpenBSD and thus QEMU does not compile here anymore. Fix it by renaming our struct to slirp_arphdr instead. Reported-by: Brad Smith Reviewed-by: NSamuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: NThomas Huth <thuth@redhat.com> Message-id: 1471249494-17392-1-git-send-email-thuth@redhat.com Buglink: https://bugs.launchpad.net/qemu/+bug/1613133Signed-off-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Marc-André Lureau 提交于
Since commit d7a04fd7, tcp_chr_wait_connected() was introduced, so vhost-user could wait until a backend started successfully. In vhost-user case, the chr socket must be plain unix, and the chr+vhost setup happens synchronously during qemu startup. However, with TLS and telnet socket, initial socket setup happens asynchronously, and s->connected is not set after the socket is accepted. In order for tcp_chr_wait_connected() to not keep accepting new connections and proceed with the last accepted socket, it can check for s->ioc instead. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: NDaniel P. Berrange <berrange@redhat.com> Message-id: 20160816083332.15088-1-marcandre.lureau@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Daniel P. Berrange 提交于
The virtio-gpu.h file defines a macro VIRTIO_GPU_FILL_CMD which includes a call to qemu_log_mask, but does not include qemu/log.h. In a default configure, it is lucky and gets qemu/log.h indirectly due to the 'log' trace backend being enabled. If that trace backend is disabled though, eg ./configure --enable-trace-backends=nop Then the build will fail: In file included from /home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:19:0: /home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c: In function ‘virgl_cmd_create_resource_2d’: /home/berrange/src/virt/qemu/include/hw/virtio/virtio-gpu.h:138:13: error: implicit declaration of function ‘qemu_log_mask’ [-Werror=implicit-function-declaration] qemu_log_mask(LOG_GUEST_ERROR, \ ^ /home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:34:5: note: in expansion of macro ‘VIRTIO_GPU_FILL_CMD’ VIRTIO_GPU_FILL_CMD(c2d); ^~~~~~~~~~~~~~~~~~~ /home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:34:5: error: nested extern declaration of ‘qemu_log_mask’ [-Werror=nested-externs] In file included from /home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:19:0: /home/berrange/src/virt/qemu/include/hw/virtio/virtio-gpu.h:138:27: error: ‘LOG_GUEST_ERROR’ undeclared (first use in this function) qemu_log_mask(LOG_GUEST_ERROR, \ [snip many more errors] Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Message-id: 1470648700-3474-1-git-send-email-berrange@redhat.com Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Build fix for the ccw bios (bios itself not rebuilt). # gpg: Signature made Tue 16 Aug 2016 08:00:16 BST # gpg: using RSA key 0xDECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20160816: pc-bios/s390-ccw.img: Fix build Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Block layer patches for 2.7.0-rc3 # gpg: Signature made Mon 15 Aug 2016 14:55:46 BST # gpg: using RSA key 0x7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: iotests: Test case for wrong runtime option types block/nbd: Store runtime option values block/blkdebug: Store config filename block/nbd: Use QemuOpts for runtime options block/ssh: Use QemuOpts for runtime options Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Christian Borntraeger 提交于
Since commit a9c87304 ("build-sys: fix building with make CFLAGS=.. argument") pc-bios/s390-ccw.img build might fail with --- snip --- main.o: In function `virtio_setup': qemu/pc-bios/s390-ccw/main.c:117: undefined reference to `__stack_chk_fail' --- snip --- Changing the CFLAGS to QEMU_CFLAGS does the trick. We also need to add -fno-strict-aliasing as this was filtered out. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Message-Id: <1471258997-5811-1-git-send-email-borntraeger@de.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
-
由 Peter Maydell 提交于
ppc patch queue for 2016-08-15 Just a single patch here, I hope this is the last ppc / spapr fix to squeeze into qemu-2.7. # gpg: Signature made Mon 15 Aug 2016 07:46:36 BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.7-20160815: ppc: parse cpu features once Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Xen 2016/08/12, fixed commit message # gpg: Signature made Sat 13 Aug 2016 00:39:09 BST # gpg: using RSA key 0x894F8F4870E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" # Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90 * remotes/sstabellini/tags/xen-20160812-tag-2: xen: handle inbound migration of VMs without ioreq server pages Xen: fix converity warning of xen_pt_config_init() Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-