Currently QEMU passes the qdev device id to the guest in an ASCII-string
designator in page 0x83.  While this is fine, it does not match what
real hardware does; usually the ASCII-string designator there hosts
another copy of the serial number (there can be other designators,
for example with a world-wide name).  Do the same for QEMU SCSI
disks.

ATAPI does not support VPD pages, so it does not matter there.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This commit is more or less obvious.  What it caused is less obvious:
SCSI CD drives failed to eject under Linux, though for example the
"change" command worked okay.  This happens because of the autoclose
option in the Linux CD-ROM driver.

The actual chain of events is quite complex and somehow involves
udev helpers; the actual command that matters is READ TOC, though
honestly it's not really clear to me how because it should always be
invoked after autoclose, not before.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

e141ab52 didn't handle
the other memory access helper case, fix.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Adjust generation of load and store templates so that the functions
take a parameter for CPUState instead of relying on global env.

Remove wrappers. Move remaining memory helpers to ldst_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Make memory access helpers take a parameter for CPUState instead
of relying on global env. Introduce wrappers for load and store ops.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Optionally, make memory access helpers take a parameter for CPUState
instead of relying on global env.

On most targets, perform simple moves to reorder registers. On i386,
switch from regparm(3) calling convention to standard stack-based
version.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use stack based calling convention (GCC default) for interfacing with
generated code instead of register based convention (regparm(3)).
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Generate correct trap for external interrupts. Map PCI and ISA IRQs to
RIC/UltraSPARC-IIi interrupt vectors.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Not strictly accurate for Sparc64 but avoid confusing Valgrind.
Reported-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

PBM has a normal PCI device header, fix.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
  hw/pxa2xx.c: Fix handling of pxa2xx_i2c variable offset within region
  hw/pxa2xx_lcd.c: drop target_phys_addr_t usage in device state
  hw/pxa2xx_dma.c: drop target_phys_addr_t usage in device state
  ARM: Remove unnecessary subpage workarounds
  hw/omap_i2c: Convert to qdev

next_tb is the numeric value of a tcg target (= QEMU host) address.

Using tcg_target_ulong instead of unsigned long shows this and makes
the code portable for hosts with an unusual size of long (w64).

The type cast '(long)(next_tb & ~3)' was not needed (casting
unsigned long to long does not change the bits, and nor does
casting long to pointer for most (= all non w64) hosts.
It is removed here.

Macro or function tcg_qemu_tb_exec is used to set next_tb.
The function also returns next_tb. Therefore tcg_qemu_tb_exec
must return a tcg_target_ulong.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

C99 appears to consider compound literals as non-constants, and complains
when they are used in static initializers.  Switch to ordinary initializer
syntax.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Acked-by: NAndreas Färber <afaerber@suse.de>
Reported-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
  target-arm: Decode SETEND correctly in Thumb
  target-arm: Clear IT bits when taking exceptions in v7M
  target-arm: Fix typo in ARM946 cp15 c5 handling

* 'malta' of git://qemu.weilnetz.de/qemu:
  malta: Fix display for LED array
  malta: Use symbolic hardware addresses
  malta: Always allocate flash memory
  malta: Clean allocation of bios region alias

* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf:
  PPC: Fix openpic with relative memregions
  pseries: Configure PCI bridge using properties
  PPC: KVM: Synchronize regs on CPU dump
  kvm: Comparison with ioctl number macros needs to be unsigned
  ppc: Correctly define POWERPC_INSNS2_DEFAULT
  pseries: Add support for level interrupts to XICS
  PPC: Fix large page support in TCG
  PPC: Add PIR register to POWER7 CPU
  pseries: Remove PCI device from PCI host bridge code
  pseries: Remove unused constant from PCI code
  pseries: Update SLOF firmware image
  PPC64: Add support for ldbrx and stdbrx instructions
  pseries: Don't try to munmap() a malloc()ed TCE table
  ppc: Add missing 'static' to spin_rw_ops
  PPC: 405: Fix ppc405ep initialization
  Bad zero comparison for sas_ss_flags on powerpc

VMSTATE_VARRAY_UINT32() is used in hw/ds1225y.c, and we checked
VMS_VARRAY_UINT32 bit of field->flags in vmstate_load_state(),
but we don't check this bit in vmstate_save_state().
Signed-off-by: NAmos Kong <akong@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

An attempt to allocate a large memory chunk after a small one resulted in
circular links in list of pools.  It caused the same memory being
allocated twice for different arrays.

Now pools for large memory chunks are kept in separate list and are
freed during pool reset because current allocator can not reuse them.
Signed-off-by: NKirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The pxa2xx I2C controller can have its registers at an arbitrary offset
within the MemoryRegion it creates. We use this to create two controllers,
one which covers a region of size 0x10000 with registers starting at an
offset 0x1600 into that region, and a second one which covers a region
of size just 0x100 with the registers starting at the base of the region.

The implementation of this offsetting uses two qdev properties, "offset"
(which sets the offset which must be subtracted from the address to
get the offset into the actual register bank) and "size", which is the
size of the MemoryRegion. We were actually using "offset" for two
purposes: firstly the required one of handling the registers not being
at the base of the MemoryRegion, and secondly as a workaround for a
deficiency of QEMU. Until commit 5312bd8b, if a MemoryRegion was mapped
at a non-page boundary, the address passed into the read and write
functions would be the offset from the start of the page, not the
offset from the start of the MemoryRegion. So when calculating the value
to set the "offset" qdev property we included a rounding to a page
boundary.

Following commit 5312bd8b MemoryRegion read/write functions are now
correctly passed the offset from the base of the region, and our
workaround now means we're subtracting too much from addresses, resulting
in warnings like "pxa2xx_i2c_read: Bad register 0xffffff90".
The fix for this is simply to remove the rounding to a page boundary;
this allows us to slightly simplify the expression since
  base - (base & (~region_size)) == base & region_size

The qdev property "offset" itself must remain because it is still
performing its primary job of handling register banks not being at
the base of the MemoryRegion.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>

Pxa2xx LCD controller is intended to work with 32-bit bus and it has no knowledge
of system's physical address size, so it should not use target_phys_addr_t in it's
state. Convert three variables in DMAChannel state from target_phys_addr_t to uint32_t,
use VMSTATE_UINT32 instead of VMSTATE_UINTTL for these variables.
We can do this safely because:
1) pxa2xx has 32-bit physical address;
2) rest of the code in file never assumes converted variables to have any size
different from uint32_t;
3) we shouldn't have used VMSTATE_UINTTL in the first place because this macro
is for target_ulong type (which can be different from target_phys_addr_t).
Signed-off-by: NIgor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Pxa2xx DMA controller is a 32-bit device and it has no knowledge of system's
physical address size, so it should not use target_phys_addr_t in it's state.
Convert variables descr, src and dest from type target_phys_addr_t to uint32_t,
use VMSTATE_UINT32 instead of VMSTATE_UINTTL for these variables.

We can do this safely because:
1) pxa2xx actually has 32-bit physical address size;
2) rest of the code in file never assumes descr, src and dest variables to have
size different from uint32_t;
3) we shouldn't have used VMSTATE_UINTTL in the first place because this macro
is for target_ulong type (which can be different from target_phys_addr_t).
Signed-off-by: NIgor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In the ARM per-CPU peripherals (GIC, private timers, SCU, etc),
remove workarounds for subpage memory region read/write functions
being passed offsets from the start of the page rather than the
start of the region. Following commit 5312bd8b the masking off
of high bits of the address offset is now harmless but unnecessary.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>

The 8-LED array was already implemented in the first commit to Malta,
but this implementation was incomplete.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

The patch adds definitions of some hardware addresses and uses these
definitions.

It also replaces the type of all addresses from signed to unsigned values.
This is only a cosmetic change because addresses are unsigned values,
the functions called also expect unsigned values,
and we need no sign extension here.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

There is no reason why there should not be a flash memory when the
Malta emulation is started with a Linux kernel. When flash memory
is always available, the code is simpler, and it can be better tested.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

It is sufficient to define the region alias once for all code branches.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

Decode the SETEND instruction correctly in Thumb mode,
rather than accidentally treating it like CPS. We don't
support BE8 mode, but this change brings the Thumb mode
in to line with behaviour in ARM mode: 'SETEND BE' is
not supported and will provoke an UNDEF exception, but
'SETEND LE' is correctly handled as a no-op.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reported-by: NDaniel Forsgren <daniel.forsgren@enea.com>
Reviewed-by: NLaurent Desnogues <laurent.desnogues@gmail.com>

When taking an exception for an M profile core, we must clear
the IT bits. Since the IT bits are cached in env->condexec_bits
we must clear them there: writing the bits in env->uncached_cpsr
has no effect. (Reported as LP:944645.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix a typo in handling of the ARM946 cp15 c5 c0 0 1 handling
(instruction access permission bits) that meant it would
return the data access permission bits by mistake.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the omap_i2c device to qdev.
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

After commit 5312bd8b we got memory region relative offsets into our mmio
callbacks instead of page boundary based offsets.

This broke the OpenPIC emulation which expected offsets to be on page boundary
and substracted its region offset manually.

This patch gets rid of that manual substraction and lets the memory api do its
magic instead.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently, the function spapr_create_phb() uses its parameters to
initialize the correct memory windows for the new PCI Host Bridge
(PHB).  This is not the way things are supposed to be done with qdevs,
and means you can't create extra PHBs easily using -device.

Since pSeries machines can and do have many PHBs with various
configurations, this is a real limitation, not just a theoretical.
This patch, therefore, alters the PHB initialization code to use qdev
properties to set these parameters of the new bridge, moving most of
the code from spapr_create_phb() to spapr_phb_init().

While we're at it, we change the naming of each PCI bus and its
associated memory regions to be less arbitrary and make it easier to
relate the guest and qemu views of memory to each other.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When we dump the CPU registers, there's a certain chance they haven't been
synchronized with KVM yet, so we have to manually trigger that.

This aligns the code with x86 and fixes a bug where the register state was
bogus on invalid/unknown kvm exit reasons.
Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

In kvm-all.c we store an ioctl cmd number in the irqchip_inject_ioctl field
of KVMState, which has type 'int'.  This seems to make sense since the
ioctl() man page says that the cmd parameter has type int.

However, the kernel treats ioctl numbers as unsigned - sys_ioctl() takes an
unsigned int, and the macros which generate ioctl numbers expand to
unsigned expressions.  Furthermore, some ioctls (IOC_READ ioctls on x86
and IOC_WRITE ioctls on powerpc) have bit 31 set, and so would be negative
if interpreted as an int. This has the surprising and compile-breaking
consequence that in kvm_irqchip_set_irq() where we do:
    return (s->irqchip_inject_ioctl == KVM_IRQ_LINE) ? 1 : event.status;
We will get a "comparison is always false due to limited range of data
type" warning from gcc if KVM_IRQ_LINE is one of the bit-31-set ioctls,
which it is on powerpc.

So, despite the fact that the man page and posix say ioctl numbers are
signed, they're actually unsigned.  The kernel uses unsigned, the glibc
header uses unsigned long, and FreeBSD, NetBSD and OSX also use unsigned
long ioctl numbers in the code.

Therefore, this patch changes the variable to be unsigned, fixing the
compile.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

'POWERPC_INSNS2_DEFAULT' was defined incorrectly which was causing the
opcode table creation code to erroneously register 'eieio' and 'mbar'
for the "default" processor:

   ** ERROR: opcode 1a already assigned in opcode table 16
   *** ERROR: unable to insert opcode [1f-16-1a]
   *** ERROR initializing PowerPC instruction 0x1f 0x16 0x1a
Signed-off-by: NMeador Inge <meadori@codesourcery.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The pseries "xics" interrupt controller, like most interrupt
controllers can support both message (i.e. edge sensitive) interrupts
and level sensitive interrupts, but it needs to know which are which.

When I implemented the xics emulation for qemu, the only devices we
supported were the PAPR virtual IO devices.  These devices only use
message interrupts, so they were the only ones I implemented in xics.

Since then, however, we have added support for PCI devices, which use
level sensitive interrupts.  It turns out the message interrupt logic
still actually works most of the time for these, but there are
circumstances where we can lost interrupts due to the incorrect
interrupt logic.

This patch, therefore, implements the correct xics level-sensitive
interrupt logic.  The type of the interrupt is set when a device
allocates a new xics interrupt.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Fix large page support in TCG. The old code would overwrite the large page
table entry with the fake 4 KB one generated here whenever the ref/change bits
were updated, causing it to point to the wrong area of memory.
Signed-off-by: NNathan Whitehorn <nwhitehorn@freebsd.org>
Acked-by: NDavid Gibson <david@gibson.drobpear.id.au>
[agraf: fix whitespace, braces]
Signed-off-by: NAlexander Graf <agraf@suse.de>

The POWER7 emulation is missing the Processor Identification Register,
mandatory in recent POWER CPUs, that is required for SMP on at least
some operating systems (e.g. FreeBSD) to function properly. This patch
copies the existing PIR code from the other CPUs that implement it.
Signed-off-by: NNathan Whitehorn <nwhitehorn@freebsd.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>