it might happen in the future that a function directly invokes its callback.
In this case we end up in a segfault because the iTask is gone when the BH
is scheduled.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

this patch adds handling of BUSY status reponse from an iSCSI target.
Currently, we fail with -EIO in case of SCSI_STATUS_BUSY while the
obvious reaction would be to retry the operation after some time.
The retry time is randomly choosen from a range with exponential
growth increasing with each retry.

This patch includes most of the changes by a an upcoming patch
from Stefan Hajnoczi:

 iscsi: implement .bdrv_detach/attach_aio_context()

because I also need the reference to the aio_context for
the retry timer to work. I included the changes to maintain
better mergeability.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Patch queue for ppc - 2014-06-16

This pull request brings a lot of fun things. Among others we have

  - e500: u-boot firmware support
  - sPAPR: magic page enablement
  - sPAPR: add "compat" CPU option to support older guests
  - sPAPR: refactorings in preparation for VFIO
  - POWER8 live migration
  - mac99: expose bus frequency
  - little endian core dump, gdb and disas support
  - new ppc64le-linux-user target
  - DFP emulation
  - bug fixes

# gpg: Signature made Mon 16 Jun 2014 12:28:32 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found

* remotes/agraf/tags/signed-ppc-for-upstream: (156 commits)
  spapr_pci: Advertise MSI quota
  PPC: KVM: Make pv hcall endian agnostic
  powerpc: use float64 for frsqrte
  spapr: Add kvm-type property
  spapr: Create SPAPRMachine struct
  linux-user: Tell guest about big host page sizes
  spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE
  spapr_hcall: Split h_set_mode()
  target-ppc: Enable DABRX SPR and limit it to <=POWER7
  target-ppc: Enable PPR and VRSAVE SPRs migration
  target-ppc: Add POWER8's Event Based Branch (EBB) control SPRs
  KVM: target-ppc: Enable TM state migration
  target-ppc: Add POWER8's TM SPRs
  target-ppc: Add POWER8's MMCR2/MMCRS SPRs
  target-ppc: Enable FSCR facility check for TAR
  target-ppc: Add POWER8's FSCR SPR
  target-ppc: Add POWER8's TIR SPR
  target-ppc: Refactor class init for POWER7/8
  target-ppc: Switch POWER7/8 classes to use correct PMU SPRs
  target-ppc: Make use of gen_spr_power5p_lpar() for POWER7/8
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Duplicate removal was added to extract-libs in order to avoid including
the same library multiple times into the linking command line; this could
potentially happen when using "foo.mo-libs" (which adds the library to
all components, causing it to appear N times if the module is composed
of N objects).  However, sorting and removing duplicates causes problems
with static linking, and also with space-separated linker options as
found in some Mac OS X packaging systems.  Furthermore, the "optimization"
is really a non-problem since we do not expect .mo modules to be composed
of many files.
Reported-by: NSean Bruno <sbruno@ignoranthack.me>
Tested-by: NSean Bruno <sbruno@ignoranthack.me>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1402929805-16836-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block pull request

# gpg: Signature made Mon 16 Jun 2014 12:22:22 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request: (39 commits)
  QemuOpts: cleanup tmp 'allocated' member from QemuOptsList
  cleanup QEMUOptionParameter
  vpc.c: replace QEMUOptionParameter with QemuOpts
  vmdk.c: replace QEMUOptionParameter with QemuOpts
  vhdx.c: replace QEMUOptionParameter with QemuOpts
  vdi.c: replace QEMUOptionParameter with QemuOpts
  ssh.c: replace QEMUOptionParameter with QemuOpts
  sheepdog.c: replace QEMUOptionParameter with QemuOpts
  rbd.c: replace QEMUOptionParameter with QemuOpts
  raw_bsd.c: replace QEMUOptionParameter with QemuOpts
  raw-win32.c: replace QEMUOptionParameter with QemuOpts
  raw-posix.c: replace QEMUOptionParameter with QemuOpts
  qed.c: replace QEMUOptionParameter with QemuOpts
  qcow2.c: replace QEMUOptionParameter with QemuOpts
  QemuOpts: export qemu_opt_find
  qcow.c: replace QEMUOptionParameter with QemuOpts
  nfs.c: replace QEMUOptionParameter with QemuOpts
  iscsi.c: replace QEMUOptionParameter with QemuOpts
  gluster.c: replace QEMUOptionParameter with QemuOpts
  cow.c: replace QEMUOptionParameter with QemuOpts
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Hotplug of multiple disks fails due to MSI vector quota check.
Number of MSI vectors default to 8 allowing only 4 devices.
This happens on RHEL6.5 guest. RHEL7 and SLES11 guests fallback
to INTX.

One way to workaround the issue is to increase total MSIs,
so that MSI quota check allows us to hotplug multiple disks.

This sets the quota to the maximum number of interupts XICS has
which is 1024 now (XICS_IRQS). This moves XICS_IRQS from spapr.c
to xics.h for wider visibility.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
[aik: put XICS_IRQS=1024 instead of 64i, fixed endianness and size]
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

There were a few revisions of the Linux kernel that incorrectly swapped
the hcall instructions when they saw ePAPR compliant hypercalls.

We already have fixups for those in place when running with PR KVM, but
HV KVM and systems that don't implement hypercalls at all are still broken
because they fall back to the QEMU implementation of fallback hypercalls.

So let's make the fallback hypercall instruction path endian agnostic. This
only really works well for 64bit guests, but I don't think there are any 32bit
systems left that don't implement real pv hcall support, so we'll never get
into this code path.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Remove the code that reduce the result to float32 as the frsqrte
instruction is defined to return a double-precision estimate of
the reciprocal square root.

Although reducing the fractional part is harmless (as the estimation
must have at least 12 bits of precision according to the old PEM),
reducing the exponent range is not correct.
Signed-off-by: NTristan Gingold <gingold@adacore.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The kvm-type machine option was left out when MachineState was
introduced, preventing the kvm-type option from being used. Add the
missing property to the sPAPR machine class, so it can be used.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Tested-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Tested-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

We tell the guest its page size via AUX vectors. The guest process then uses
this page size as information on which boundaries it can mmap() things.

However, if the host has a bigger page size granularity than the guest, it can
not fulfill these mmap() requests - which falls apart when MAP_FIXED is passed
to mmap.

So in that case, let the guest know that we're running on a bigger page size
granularity than the target would require.

This fixes running qemu-ppc (TARGET_PAGE_SIZE=4k) on a 64k page size ppc64 host
for me.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This adds handling of the RESOURCE_ADDR_TRANS_MODE resource from
the H_SET_MODE, for POWER8 (PowerISA 2.07) only.

This defines AIL flags for LPCR special register.

This changes @excp_prefix according to the mode, takes effect in TCG.

This turns support of a new capability PPC2_ISA207S flag for TCG.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This moves H_SET_MODE_RESOURCE_LE handler to a separate function
as there are other "resources" coming and this is going to become ugly.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This adds DABRX SPR.

As DABR(X) are present in POWER CPUs till POWER7 only and POWER8 does not
have them (as it implements more powerful facility instead), this limits
DABR/DABRX registration by POWER7 (inclusive).
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This hooks SPR with their "KVM set_one_reg" counterparts which enables
their migration.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

POWER8 supports Event-Based Branch Facility (EBB). It is controlled via
set of SPRs access to which should generate an "Facility Unavailable"
interrupt if the facilities are not enabled in FSCR for problem state.

This adds EBB SPRs.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This adds migration support for registers saved before Transactional
Memory (TM) transaction started.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This adds TM (Transactional Memory) SPRs.

This adds generic spr_read_prev_upper32()/spr_write_prev_upper32() to
handle upper half SPRs such as TEXASRU which is upper half of TEXASR.
Since this is not the only register like that and their numbers go
consequently, it makes sense to generalize the helpers.

This adds a gen_msr_facility_check() helper which purpose is to generate
the Facility Unavailable exception if the facility is disabled.
It is a copy of gen_fscr_facility_check() but it checks for enabled
facility in MSR rather than FSCR/HFSCR. It still sets the interrupt cause
in FSCR/HFSCR (whichever is passed to the helper).

This adds spr_read_tm/spr_write_tm/spr_read_tm_upper32/spr_write_tm_upper32
which are used for TM SPRs.

This adds TM-relates MSR bits definitions. This enables TM in POWER8 CPU class'
msr_mask.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This adds POWER8 specific PMU MMCR2/MMCRS SPRs.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This makes user-privileged read/write fail if TAR facility is not enabled
in FSCR.

Since this is the very first check for enabled in FSCR facility,
this also adds gen_fscr_facility_check() for using in spr_write_tar()/
spr_read_tar().

This enables TAR in FSCR for user mode unconditionally.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This adds an FSCR (Facility Status and Control Register) SPR. This defines
names for FSCR bits.

This defines new exception type - POWERPC_EXCP_FU - "facility unavailable" (FU).
This registers an interrupt vector for it at 0xF60 as PowerISA defines.

This adds a TCG helper_fscr_facility_check() helper to raise an exception
if the facility is not enabled. It updates the interrupt cause field
in FSCR. This adds a TCG translation block generation code. The helper
may be used for HFSCR too as it has the same format.

The helper raising FU exceptions is not used by this patch but will be
in the next ones.

This adds gen_update_current_nip() to update NIP in DisasContext.
This helper is not used now and will be called before checking for
a condition for throwing an FU exception.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This adds TIR (Thread Identification Register) SPR first defined for server
CPUs in PowerISA 2.07.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This extends init_proc_book3s_64 to support POWER7 and POWER8.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This replaces gen_spr_7xx() call (which registers 32bit SPRs) with
gen_spr_book3s_pmu() call.

This removes SPR_7XX_PMC5/6 as they are for 32bit and gen_spr_book3s_pmu()
already registers correct PMC5/6 SPRs.

This removes explicit MMCRA registration as gen_spr_book3s_pmu() does it
anyway.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This makes use of generic gen_spr_power5p_lpar() which registers LPCR SPR.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This replaces VRSAVE registration and vscr_init() call with
gen_spr_book3s_altivec() which is generic and does the same thing if
insns_flags has PPC_ALTIVEC bit set (which POWER7/8 have set).
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This moves SCFAR/DSCR/CTRL/PPR/PCR PRs to helpers. Later these helpers
will be called from generalized init_proc_book3s_64().

This switches init_proc_POWER7() to use generalized gen_spr_book3s_common()
which registers CRTL SPR under slightly different names. No change in
behaviour or non-debug output is expected.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This moves TAR SPR to a helper. Later this helper will be
called from generalized init_proc_book3s_64().
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This moves PIR/PURR/SPURR SPRs to helpers. Later these helpers will be
called from generalized init_proc_book3s_64().
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This enabled PMU SPRs migration by hooking hypv privileged versions with
"KVM one reg" IDs.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

After merging 970s into one class, check_pow_970() is used for all of them.
Since POWER5+ is no different in the matter of supported power modes,
let's use the same check_pow() callback for POWER5+ too,
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

At the moment every POWER CPU family has its own init_proc_POWERX function.
E500 already has common init function so we try to do the same thing.

This introduces BOOK3S_CPU_TYPE enum with 2 values - 970 and POWER5+.

This introduces generalized init_proc_book3s_64() which accepts a CPU type
as a parameter.

This uses new init function for 970 and POWER5+ CPU classes.

970 and POWER5+ use the same CPU class initialization except 3 things:
1. logical partitioning is controlled by LPCR (POWER5+) and HID4 (970)
SPRs;
2. 970 does not have EAR (External Access Register) SPR and PowerISA 2.03
defines one so keep it only for POWER5+;
3. POWER5+ does not have ALTIVEC so insns_flags does not have PPC_ALTIVEC
flag set and gen_spr_book3s_altivec() won't init ALTIVEC for POWER5+.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Previously LPCR was registered for the 970 class which was wrong as
it does not have LPCR. Instead, HID4 is used which this patch registers.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Compared to PowerISA-compliant CPUs, 970 family has most of them plus
PMC7/8 which are only present on 970 but not on POWER5 and later CPUs.

Since we are changing SPRs for Book3s/970 families, let's add them too.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

MMCR0, MMCR1, MMCRA, PMC1..6, SIAR, SDAR are defined for 970 and PowerISA
CPUs. Since we are building common infrastructure for SPRs intialization
to share it between 970 and POWER5+/7/..., let's add missing SPRs to
the 970 family. Later rework of CPU class initialization will use those
for all PowerISA CPUs.

This adds new SPRs and enables writing to Uxxxx SPRs from supermode.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Since we started adding "POWER" prefix to 64bit PMU SPRs, let's finish
the transition and fix MMCRA and define a supermode version of it.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This stops using 7xx common SPRs init function and adds separate set
of helpers for 970.

This does not copy ICTC SPR as neither 970 manual nor PowerISA mention it.

This defines 970/book3s PMU SPRs constants as they differs from the ones
used for 7XX.

This creates 2 helpers for PMU SPRs, one for supermode privileged SPRs and
one for user privileged SPRs as "sup" versions can be shared across
the family while "user" versions will behave different starting POWER8
(which will be addressed later).

This allows writing to Uxxxx SPRs from supermode. spr_write_ureg() is
implemented for this as a copy of already existing spr_read_ureg().

This allows writing to supervisor's SIAR - it used to be disabled
when gen_spr_7xx() was used.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This changes UCTRL SPR to read from its supermode copy.

This enables reading from UCTRL in user mode.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This splits one init_proc_970() into a set of small helpers. Later
init_proc_970() will be generalized and will call different set of helpers
depending on the current CPU class.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The differences between classes were:
1. SLB size, was 32 for 970 and 64 for others, should be 64 for all;
2. check_pow() callback, HID0 format is the same so should be the same
0x01C00000 which means "deep nap", "doze" and "nap" bits set;
3. LPCR - 970 does not have it but 970MP had one (by mistake).

This fixes wrong differences and makes one 970 class.

This fixes wrong registration of LPCR which is not present on 970.

This defines HID0 bits and uses them in check_pow_970().

This does not copy MSR_SHV (Hypervisor State, HV) bit from 970FX to
970 class as we do not emulate hypervisor in QEMU anyway.

This does not remove check_pow_970FX now as it is still used by POWER5+
class, this will be addressed later.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>