Add parameter errp to gethugepagesize thus callers can handle errors.

If user adds a memory-backend-file object using object_add command,
specifying a non-existing directory for property mem-path, qemu will
core dump with message:

  /nonexistingdir: No such file or directory
  Bad ram offset fffffffffffff000
  Aborted (core dumped)

This patch fixes the problem. With this patch, qemu reports an error
message like:

  qemu-system-x86_64: -object memory-backend-file,mem-path=/nonexistingdir,id=mem-file0,size=128M:
  failed to get page size of file /nonexistingdir: No such file or directory
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Report an error when memory < hpagesize in file_ram_alloc() so callers
can handle the error.

If user adds a memory-backend-file object using object_add command,
specifying a size that is less than huge page size, qemu will core dump
with message:

  Bad ram offset fffffffffffff000
  Aborted (core dumped)

This patch fixes the problem. With this patch, qemu reports error
message like:

  qemu-system-x86_64: -object memory-backend-file,mem-path=/hugepages,id=mem-file0,size=1M: memory
  size 0x100000 must be equal to or larger than huge page size 0x200000
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When using monitor command object_add to add a memory backend whose
size is way too big to allocate memory for it, qemu just exits. In
the case we'd better give an error message and keep guest running.

The problem can be reproduced as follows:

1. run qemu
2. (monitor)object_add memory-backend-ram,size=100000G,id=ram0
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add parameter errp to memory_region_init_rom_device and update all call
sites to propagate the error.
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
[Propagate the error out of realize. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr so that
we can handle errors.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
[Assert ptr != NULL in memory_region_init_ram_ptr. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This fixes an issue with module build system. block/iscsi.so is
currently broken:

    $ ~/build/last/qemu-img
    Failed to open module: /home/fam/build/master/block-iscsi.so:
    undefined symbol: qmp_query_uuid
    qemu-img: Not enough arguments
    Try 'qemu-img --help' for more information

To fix this, we should (at least) let qemu-img link qmp_query_uuid from
libqemustub.a. (There are a few other symbols missing, as well.)

This patch changes the linking rules to:

1) Build ".mo" with "ld -r -o $@ $^" for each ".so", and later build .so
   with it.

2) Always build all the .mo before linking the executables. This is
   achieved by adding those .mo files to the executables' "-y"
   variables.

3) When linking an executable, those .mo files in its "-y" variables are
   filtered out, and replaced by one or more -Wl,-u,$symbol flags. This
   is done in the added macro "process-archive-undefs".

   These "-Wl,-u,$symbol" flags will force ld to pull in the function
   definition from the archives when linking.

   Note that the .mo objects, that are actually meant to be linked in
   the executables, are already expanded in unnest-vars, before the
   linking command. So we are safe to simply filter out .mo for the
   purpose of pulling undefined symbols.

   process-archive-undefs works as this: For each ".mo", find all the
   undefined symbols in it, filter ones that are defined in the
   archives. For each of these symbols, generate a "-Wl,-u,$symbol" in
   the link command, and put them before archive names in the command
   line.
Suggested-by: NH.J. Lu <hjl.tools@gmail.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

So that we won't have an empty getauxval.o which is disliked by ranlib.
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In any other cases the object file is effectively empty, which is
disliked by ranlib and nm on Mac OS X.
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Just go to the internal error runstate.  This lets you use the "x",
"dump-guest-memory" or "info register" commands.
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

QOM CPUState and X86CPU

* Include exception state in CPU VMState
* Fix -cpu *,migratable=foo
* Error out on unknown -cpu *,+foo,-bar

# gpg: Signature made Fri 05 Sep 2014 15:38:14 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-cpu-for-peter:
  target-i386: Reject invalid CPU feature names on the command-line
  target-i386: Support migratable=no properly
  exec: Save CPUState::exception_index field
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Instead of simply printing a warning, report an error when invalid CPU
options are provided on the CPU model string.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

When the "migratable" property was implemented, the behavior was tested
by changing the default on the code, but actually using the option on
the command-line (e.g. "-cpu host,migratable=false") doesn't work as
expected. This is a regression for a common use case of "-cpu host",
which is to enable features that are supported by the host CPU + kernel
before feature-specific code is added to QEMU.

Fix this by initializing the feature words for "-cpu host" on
x86_cpu_parse_featurestr(), right after parsing the CPU options.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This patch adds a subsection with exception_index field to the VMState for
correct saving the CPU state.
Without this patch, simulator could miss the pending exception in the saved
virtual machine state.
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Cc: qemu-stable@nongnu.org
Signed-off-by: NAndreas Färber <afaerber@suse.de>

pty: Fix byte loss bug when connecting to pty

# gpg: Signature made Fri 05 Sep 2014 12:57:32 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-chardev-20140905-1:
  pty: Fix byte loss bug when connecting to pty
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When trying to print data to the pty, we first check if it is connected.
If not, we try to reconnect, but we drop the pending data even if we
have successfully reconnected; this makes us lose the first byte of the very
first transmission.
This small fix addresses the issue by checking once more if the pty is connected
after having tried to reconnect.
Signed-off-by: NSebastian Tanase <sebastian.tanase@openwide.fr>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

CVE-2014-3615: fix sanity checks in vbe (bochs dispi) and spice.

# gpg: Signature made Fri 05 Sep 2014 12:18:04 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-cve-2014-3615-20140905-1:
  spice: make sure we don't overflow ssd->buf
  vbe: rework sanity checks
  vbe: make bochs dispi interface return the correct memory size with qxl
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Related spice-only bug.  We have a fixed 16 MB buffer here, being
presented to the spice-server as qxl video memory in case spice is
used with a non-qxl card.  It's also used with qxl in vga mode.

When using display resolutions requiring more than 16 MB of memory we
are going to overflow that buffer.  In theory the guest can write,
indirectly via spice-server.  The spice-server clears the memory after
setting a new video mode though, triggering a segfault in the overflow
case, so qemu crashes before the guest has a chance to do something
evil.

Fix that by switching to dynamic allocation for the buffer.

CVE-2014-3615

Cc: qemu-stable@nongnu.org
Cc: secalert@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

QOM infrastructure fixes and device conversions

* Cleanups for recursive device unrealization

# gpg: Signature made Thu 04 Sep 2014 18:17:35 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-peter:
  qdev: Add cleanup logic in device_set_realized() to avoid resource leak
  qdev: Use NULL instead of local_err for qbus_child unrealize
  qdev: Use error_abort instead of using local_err
  memory: Remove object_property_add_child_array()
  qom: Add automatic arrayification to object_property_add()
  machine: Clean up -machine handling
  qom: Make object_child_foreach() safe for objects removal
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/kvaneesh/for-upstream:
  hw/9pfs: Don't return type from host in readdir on local 9p filesystem
  hw/9pfs: Use little-endian format for xattr values
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

At present, this function doesn't have partial cleanup implemented,
which will cause resource leaks in some scenarios.

Example:

1. Assume that "dc->realize(dev, &local_err)" executes successful
   and local_err == NULL;
2. device hotplug in hotplug_handler_plug() executes but fails
   (it is prone to occur). Then local_err != NULL;
3. error_propagate(errp, local_err) and return. But the resources
   which have been allocated in dc->realize() will be leaked.
Simple backtrace:
  dc->realize()
   |->device_realize
            |->pci_qdev_init()
                |->do_pci_register_device()
                |->etc.

Add fuller cleanup logic which assures that function can
goto appropriate error label as local_err population is
detected at each relevant point.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Forcefully unrealize all children regardless of errors in earlier
iterations (if any). We should keep going with cleanup operation
rather than report an error immediately. Therefore store the first
child unrealization failure and propagate it at the end. We also
forcefully unregister vmsd and unrealize actual object, too.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Net patches

# gpg: Signature made Thu 04 Sep 2014 17:32:44 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/net-pull-request:
  virtio-net: purge outstanding packets when starting vhost
  net: complete all queued packets on VM stop
  net: invoke callback when purging queue
  virtio: don't call device on !vm_running
  virtio-net: don't run bh on vm stopped
  net: Forbid dealing with packets when VM is not running
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

whenever we start vhost, virtio could have outstanding packets
queued, when they complete later we'll modify the ring
while vhost is processing it.

To prevent this, purge outstanding packets on vhost start.

Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This completes all packets, ensuring that callbacks
will not run when VM is stopped.

Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

devices rely on packet callbacks eventually running,
but we violate this rule whenever we purge the queue.
To fix, invoke callbacks on all packets on purge.
Set length to 0, this way callers can detect that
this happened and re-queue if necessary.

Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

On vm stop, virtio changes vm_running state
too soon, so callbacks can get envoked with
vm_running = false;

Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

commit 783e7706
    virtio-net: stop/start bh when appropriate

is incomplete: BH might execute within the same main loop iteration but
after vmstop, so in theory, we might trigger an assertion.
I was unable to reproduce this in practice,
but it seems clear enough that the potential is there, so worth fixing.

Cc: qemu-stable@nongnu.org
Reported-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

When using mapped mode in 9pfs, readdir implementation
should not return file type in d_type from the host
readdir, instead, it should use the type stored in
the extended attributes.  Since d_type is optional
and reading ext attrs for every readdir is expensive,
it should be sufficient to just set d_type to DT_UNKNOWN,
so guest will know to look it up separately.

This is a -stable material.
Signed-off-by: NBastian Blank <waldi@debian.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

This error can not happen normally. If it happens, it indicates
something very wrong, we should abort QEMU. Moreover, the
user can only refer to /machine/peripheral or /objects, not
/machine/unattached.

While at it, remove superfluous check about local_err.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Obsoleted by automatic object_property_add() arrayification.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

If "[*]" is given as the last part of a QOM property name, treat that
as an array property. The added property is given the first available
name, replacing the * with a decimal number counting from 0.

First add with name "foo[*]" will be "foo[0]". Second "foo[1]" and so
on.

Callers may inspect the ObjectProperty * return value to see what
number the added property was given.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Since commit c4090f8e, -object options are no longer handled through
object_set_property(), so clean up -object leftovers by renaming the
function and dropping special-casing of qom-type and id properties.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Current object_child_foreach() uses QTAILQ_FOREACH() to walk
through children and that makes children removal from the callback
impossible.

This makes object_child_foreach() use QTAILQ_FOREACH_SAFE().
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

For all NICs(except virtio-net) emulated by qemu,
Such as e1000, rtl8139, pcnet and ne2k_pci,
Qemu can still receive packets when VM is not running.

If this happened in *migration's* last PAUSE VM stage, but
before the end of the migration, the new receiving packets will possibly dirty
parts of RAM which has been cached in *iovec*(will be sent asynchronously) and
dirty parts of new RAM which will be missed.
This will lead serious network fault in VM.

To avoid this, we forbid receiving packets in generic net code when
VM is not running.

Bug reproduction steps:
(1) Start a VM which configured at least one NIC
(2) In VM, open several Terminal and do *Ping IP -i 0.1*
(3) Migrate the VM repeatedly between two Hosts
And the *PING* command in VM will very likely fail with message:
'Destination HOST Unreachable', the NIC in VM will stay unavailable unless you
run 'service network restart'
Signed-off-by: Nzhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

trivial patches for 2014-09-03

# gpg: Signature made Wed 03 Sep 2014 06:53:42 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-09-03:
  slirp: Honour vlan/stack in hostfwd_remove commands
  hmp: fix MemdevList memory leak
  qom/object.c, hmp.c: fix string_output_get_string() memory leak
  query-memdev: fix potential memory leaks
  MAINTAINERS: Add VMWare devices maintainer
  device_tree.c: dump all err mesages with error_report
  device_tree.c: redirect load_device_tree err message to stderr
  scripts: Remove scripts/qtest
  Fix debug print warning
  curl: The macro that you have to uncomment to get debugging is DEBUG_CURL.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pci, pc fixes, features

A bunch of bugfixes - these will make sense for 2.1.1

Initial Intel IOMMU support.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 03 Sep 2014 14:41:23 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  acpi-build: Set FORCE_APIC_CLUSTER_MODEL bit for FADT flags
  vhost-scsi: init backend features earlier
  vhost_net: init acked_features to backend_features
  vhost_net: start/stop guest notifiers properly
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This reverts commit aad4dce9.

I accidentally merged the wrong version of a pull request
which had a buggy version of this patch. Reverting the
buggy version means we can then cleanly merge in the correct
pull with the corrected change.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Plug a bunch of holes in the bochs dispi interface parameter checking.
Add a function doing verification on all registers.  Call that
unconditionally on every register write.  That way we should catch
everything, even changing one register affecting the valid range of
another register.

Some of the holes have been added by commit
e9c6149f.  Before that commit the
maximum possible framebuffer (VBE_DISPI_MAX_XRES * VBE_DISPI_MAX_YRES *
32 bpp) has been smaller than the qemu vga memory (8MB) and the checking
for VBE_DISPI_MAX_XRES + VBE_DISPI_MAX_YRES + VBE_DISPI_MAX_BPP was ok.

Some of the holes have been there forever, such as
VBE_DISPI_INDEX_X_OFFSET and VBE_DISPI_INDEX_Y_OFFSET register writes
lacking any verification.

Security impact:

(1) Guest can make the ui (gtk/vnc/...) use memory rages outside the vga
frame buffer as source  ->  host memory leak.  Memory isn't leaked to
the guest but to the vnc client though.

(2) Qemu will segfault in case the memory range happens to include
unmapped areas  ->  Guest can DoS itself.

The guest can not modify host memory, so I don't think this can be used
by the guest to escape.

CVE-2014-3615

Cc: qemu-stable@nongnu.org
Cc: secalert@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>