The buffer content might be read out more than once, currently
we just repeatedly read the first data block, buffer offset is
missing.

Cc: qemu-stable@nongnu.org
Signed-off-by: NAmos Kong <akong@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We didn't set default chr_name, the free is redundant.
Signed-off-by: NAmos Kong <akong@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Fix build failures with clang when KVM is not enabled by
providing a stub version of kvm_arch_get_supported_cpuid().
We retain the compile time check that this function isn't
called when CONFIG_KVM is not set by guarding the stub with
ifndef __OPTIMIZE__ (we assume that an optimizing build will
do sufficient constant folding and dead code elimination to
remove the calls before linking).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When an assigned device is initialized it copies the device config
space into the emulated config space.  Unfortunately multifunction is
setup prior to the device initfn and gets clobbered.  We need to
restore it just like pci-assign does.

Cc: qemu-stable@nongnu.org
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

clang defines __ATOMIC_SEQ_CST but its implementation of the
__atomic_exchange() builtin differs from that of gcc. Move the
__clang__ branch of the ifdef ladder to the top and fix its
implementation (there is no such builtin as __sync_exchange),
so we can compile with clang again.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This causes two slight backwards-incompatibilities between "-M pc-1.5"
and 1.5's "-M pc":

(1) a fw_cfg file is removed with this patch.  This is only a problem
if migration stops the virtual machine exactly during fw_cfg enumeration.

(2) after migration, a VM created without an explicit "-device pvpanic"
will stop reporting panics to management.

The first problem only occurs if migration is done at a very, very
early point (and I'm not sure it can happen in practice for reasonable-size
VMs, since it will likely take more time to send the RAM to destination,
than it will take for BIOS to scan fw_cfg).

The second problem only occurs if the guest panics _and_ has a guest
driver _and_ management knows to look at the crash event, so it is
mostly theoretical at this point in time.

Thus keep the code simple, and pretend it was never broken.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be
explicitly specifying everything and not relying on any default
variables or rules. However we were accidentally relying on the
default ARFLAGS ("rv"). This went unnoticed because of a bug in
GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS
only affected submakes, not the currently running instance.
Explicitly set ARFLAGS in config-host.mak, in the same way we
handle CFLAGS and LDFLAGS; this will allow us to work with
Make 4.0.

Thanks to Paul Smith for analyzing this bug for us.

Cc: qemu-stable@nongnu.org
Reported-by: NKen Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Upstream OpenBIOS now implements SBus probing in order to determine the
contents of a physical bus slot, which is required to allow OpenBIOS to
identify the framebuffer without help from the fw_cfg interface.

SBus probing works by detecting the presence of an FCode program
(effectively tokenised Forth) at the base address of each slot, and if
present executes it so that it creates its own device node in the
OpenBIOS device tree.

The FCode ROM is generated as part of the OpenBIOS build and should
generally be updated at the same time.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

# By Peter Lieven
# Via Juan Quintela
* quintela/migration.next:
  migration: drop MADVISE_DONT_NEED for incoming zero pages

Message-id: 1384878412-23521-1-git-send-email-quintela@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

# By Andreas Färber
# Via Stefan Hajnoczi
* stefanha/block:
  qtest: Use -display none by default

QOM infrastructure fixes for 1.7

* QOM memory leak fix

# gpg: Signature made Tue 19 Nov 2013 01:58:58 AM PST using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Vlad Yasevich
# Via Andreas Färber
* afaerber/tags/qom-devices-for-anthony:
  qom: Fix memory leak in object_property_set_link()

# By Richard Henderson
# Via Richard Henderson
* rth/tcg-ia64-17:
  tcg-ia64: Introduce tcg_opc_bswap64_i
  tcg-ia64: Introduce tcg_opc_ext_i
  tcg-ia64: Introduce tcg_opc_movi_a
  tcg-ia64: Introduce tcg_opc_mov_a
  tcg-ia64: Use A3 form of logical operations
  tcg-ia64: Use SUB_A3 and ADDS_A4 for subtraction
  tcg-ia64: Use ADDS for small addition
  tcg-ia64: Avoid unnecessary stop bit in tcg_out_alu
  tcg-ia64: Move AREG0 to R32
  tcg-ia64: Simplify brcond
  tcg-ia64: Handle constant calls
  tcg-ia64: Use shortcuts for nop insns
  tcg-ia64: Use TCGMemOp within qemu_ldst routines

Message-id: 1384811395-7097-1-git-send-email-rth@twiddle.net
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

pc last minute fixes for 1.8

This has a patch that drops an unused FW CFG entry.
I think it's best to include it before 1.7 to avoid
the need to maintain it in compat machine types.

There's also a doc bugfix by Amos: I'm guessing
doc fixes are still fair game even at this late stage.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 18 Nov 2013 03:48:14 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Amos Kong (1) and Igor Mammedov (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  doc: fix hardcoded helper path
  pc: disable pci-info

Message-id: 1384775449-6693-1-git-send-email-mst@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

# By Jan Krupa (4) and others
# Via Michael Tokarev
* mjt/trivial-patches:
  hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
  configure: Use -B switch only for Python versions which support it
  qga: Fix shutdown command of guest agent to work with SysV
  console: Remove unused debug code
  qga: Fix compilation for old versions of MinGW
  .travis.yml: basic compile and check recipes
  pci-assign: Fix error_report of pci-stub message
  qapi: Fix comment for create-type to match code.
  vl: fix build when configured with no graphic support
  usb: drop unused USBNetState.inpkt field
  qemu-char: add missing characters used in keymaps
  qemu-char: add support for U-prefixed symbols
  qemu-char: add Czech keymap file
  qemu-char: add Czech characters to VNC keysyms

Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

Block fixes for 1.7.0

# gpg: Signature made Fri 15 Nov 2013 09:51:25 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found

# By Max Reitz (3) and others
# Via Kevin Wolf
* kwolf/tags/for-anthony:
  block: Fail if requested driver is not available
  MAINTAINERS: add block driver sub-maintainers
  qemu-img: Fix overwriting 'ret' before using
  qemu-iotests: Test qcow2 count_contiguous_clusters()
  qcow2: fix possible corruption when reading multiple clusters
  qmp: access the local QemuOptsLists for drive option
  MAINTAINERS: add block tree repo URLs
  qemu-iotests: Extend 041 for unbacked mirroring
  block/drive-mirror: Check for NULL backing_hd
  qapi-schema: Update description for NewImageMode
  block: Print its file name if backing file opening failed

Message-id: 1384537999-5972-1-git-send-email-kwolf@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

# By Amos Kong (1) and Sebastian Huber (1)
# Via Stefan Hajnoczi
* stefanha/net:
  virtio-net: fix the memory leak in rxfilter_notify()
  smc91c111: Fix receive starvation

Message-id: 1384532032-19057-1-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

Patch queue for ppc - 2013-11-08

These are two patches that will hopefully make it into 1.7. The SLOF update
fixes -append kernel command line argument passing into the guest kernel. The
other patch makes VIO devices appear when using -device '?'.

# gpg: Signature made Thu 07 Nov 2013 07:34:54 PM PST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found

# By Alexey Kardashevskiy
# Via Alexander Graf
* agraf/tags/signed-ppc-for-upstream-1.7:
  pseries: Update SLOF firmware image
  spapr: add vio-bus devices to categories

Message-id: 1383881766-13958-1-git-send-email-agraf@suse.de
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

The madvise for zeroed out pages was introduced when every transferred
zero page was memset to zero and thus allocated. Since commit
211ea740 we check for zeroness of a target page before we memset
it to zero. Additionally we memmap target memory so it is essentially
zero initialized (except for e.g. option roms and bios which are loaded
into target memory although they shouldn't).

It was reported recently that this madvise causes a performance degradation
in some situations. As the madvise should only be called rarely and if it's called
it is likely on a busy page (it was non-zero and changed to zero during migration)
drop it completely.
Reported-By: NZhang Haoyu <haoyu.zhang@huawei.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Save the result of the call to object_get_canonical_path()
so we can free it.

Cc: qemu-stable@nongnu.org
Signed-off-by: NVlad Yasevich <vyasevic@redhat.com>
Reviewed-by: NAmos Kong <akong@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This avoids each test needing to add it to suppress windows popping up.

[Commit 7ceeedd0 ("blockdev-test: add
test case for drive_add duplicate IDs") and commit
43cd2098 ("qdev-monitor-test: add
device_add leak test cases") added qtest tests without specifying
-display none.

As a result, "make check" now tries to use graphics (GTK or SDL).  Since
graphics are not used by the test and inappropriate for headless "make
check" runs, add the missing -display none.

This fixes "make check" in the QEMU buildbot.
-- Stefan]
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

object_get_canonical_path() returns a gchar*, it should be freed by the
caller.
Signed-off-by: NAmos Kong <akong@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NVlad Yasevich <vyasevic@redhat.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The install directory of qemu-bridge-helper is configurable,
but we use a fixed path in the documentation.

DEFAULT_BRIDGE_HELPER macro isn't available in texi mode,
we should always use "/path/to/" prefix for dynamic paths
(e.g.: /path/to/image, /path/to/linux, etc).
Signed-off-by: NAmos Kong <akong@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Being able to "extend" from 64-bits (with a mov) simplifies
a few places where the conditional breaks the train of thought.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

We can and/or/xor/andcm small constants, saving one cycle.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

We can subtract from more small constants that just 0 with one insn,
and we can add the negative for most small constants.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Avoids a wasted cycle loading up small constants.

Simplify the code assuming the tcg optimizer is going to work
and don't expect the first operand of the add to be constant.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

When performing an operation with two input registers, we'd leave
the stop bit (and thus an extra cycle) that's only needed when one
or the other input is a constant.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Since the move away from the global areg0, we're no longer globally
reserving areg0.  Which means our use of R7 clobbers a call-saved
register.  Shift areg0 into the windowed registers.  Indeed, choose
the incoming parameter register that it comes to us by.

This requires moving the register holding the return address elsewhere.
Choose R33 for tidiness.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

There was a misconception that a stop bit is required between a compare
and the branch that uses the predicate set by the compare.  This lead to
the usage of an extra bundle in which to perform the compare.  The extra
bundle left room for constants to be loaded for use with the compare insn.

If we pack the compare and the branch together in the same bundle, then
there's no longer any room for non-zero constants.  At which point we
can eliminate half the function by not handling them.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Using only indirect calls results in 3 bundles (one to load the
descriptor address), and 4 stop bits.  By looking through the
descriptor to the constants, we can perform the call with 2
bundles and only 1 stop bit.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

There's no need to go through the full opcode-to-insn function call
to generate nops.  This makes the source a bit more readable.
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

$(PYTHON) is a Make variable which is set by configure.
In all other places over the tree, .py files are run from
Makefiles using this variable, except of a single leftover
in hw/i386/Makefile.obj (and a nearby place in there uses
$(PYTHON) correctly).  Fix this leftover too.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Cc: Luigi Rizzo <rizzo@iet.unipi.it>
Reviewed-by: N: Stefan Weil <sw@weilnetz.de>

Commit 1d984a67 added the -B switch
unconditionally. This breaks Python versions before 2.6 which don't
support that switch.

Now configure adds -B only if it is accepted by the Python interpreter.

This modification introduces a small incompatibility because -B might now
also be added when configure was called with --python=PYTHON_INTERPRETER.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

For now guest agent uses following command to shutdown system:
shutdown -P +0 "blabla"
but this syntax works only with shutdown command from systemd or upstart,
because SysV shutdown requires -h switch.

Following patch changes the command so it works with systemd, upstart and SysV

With upstart/systemd qga use one of thee commands, depending on 'mode' parameter:
  shutdown -P +0 "..."
  shutdown -H +0 "..."
  shutdown -r +0 "..."
SysV equivalents for these are:
  shutdown -h -P +0 "..."
  shutdown -h -H +0 "..."
  shutdown -h -r +0 "..."
and these retain their meaning with upstart/systemd.

According to FreeBSD manpages, shutdown does not accept -P and -H options. Commands should be:
  shutdown -p +0 "..."
  shutdown -h +0 "..."
  shutdown -r +0 "..."

shutdown in Solaris does not accept any of -hHpPr and does not accept time in "+0" format
Signed-off-by: NMichael Avdienko <whitearchey@gmail.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

If an explicit driver option is present, but doesn't specify a valid
driver, then bdrv_open() should fail instead of probing the format.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

There are a number of contributors who maintain block drivers (image
formats and protocols).  They should be listed in the MAINTAINERS file
so that get_maintainer.pl lists them.

Note that commits are still merged through Kevin or Stefan's block tree
but the block driver sub-maintainers are usually the ones to review
patches.
Acked-by: NKevin Wolf <kwolf@redhat.com>
Acked-by: NRichard W.M. Jones <rjones@redhat.com>
Acked-by: NStefan Weil <sw@weilnetz.de>
Acked-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NJeff Cody <jcody@redhat.com>
Acked-by: NAnthony Liguori <aliguori@amazon.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>