The comment preceding the float64_to_uint64 routine suggests that
the implementation is broken.  And this is, indeed, the case.

This patch properly implements the conversion of a 64-bit floating
point number to an unsigned, 64 bit integer.

This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: NTom Musta <tommusta@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Currently the int-to-float functions take types which are specified
as "at least X bits wide", rather than "exactly X bits wide". This is
confusing and unhelpful since it means that the callers have to include
an explicit cast to [u]intXX_t to ensure the correct behaviour. Fix
them all to take the exactly-X-bits-wide types instead.

Note that this doesn't change behaviour at all since at the moment
we happen to define the 'int32' and 'uint32' types as exactly 32 bits
wide, and the 'int64' and 'uint64' types as exactly 64 bits wide.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add the float to 16 bit integer conversion routines. These can be
trivially implemented in terms of the int32_to_float* routines, but
providing them makes our API more symmetrical and can simplify callers.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

ARMv8 requires support for converting 32 and 64bit floating point
values to signed and unsigned 16bit integers.
Signed-off-by: NWill Newton <will.newton@linaro.org>
[PMM: updated not to incorrectly set Inexact for Invalid inputs]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Our float32 to float16 conversion routine was generating the correct
numerical answers, but not always setting the right set of exception
flags. Fix this, mostly by rearranging the code to more closely
resemble RoundAndPackFloat*, and in particular:
 * non-IEEE halfprec always raises Invalid for input NaNs
 * we need to check for the overflow case before underflow
 * we weren't getting the tininess-detected-after-rounding
   case correct (somewhat academic since only ARM uses halfprec
   and it is always tininess-detected-before-rounding)
 * non-IEEE halfprec overflow raises only Invalid, not
   Invalid + Inexact
 * we weren't setting Inexact when we should

Also add some clarifying comments about what the code is doing.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

To make the code slightly cleaner to look at and make the save/restore
code easier to understand, introduce this function to set the priority of
interrupts.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Message-id: 1387606179-22709-3-git-send-email-christoffer.dall@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

TRIGGER can really mean mean anything (e.g. was it triggered, is it
level-triggered, is it edge-triggered, etc.).  Rename to EDGE_TRIGGER to
make the code comprehensible without looking up the data structure.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Message-id: 1387606179-22709-2-git-send-email-christoffer.dall@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

commit 5ce4f357
    "target-arm: A64: add set_pc cpu method"

introduces an array aarch64_cpus which is zero
size if this code is built without CONFIG_USER_ONLY.
In particular an attempt to iterate over this array produces a warning
under gcc 4.8.2:

 CC    aarch64-softmmu/target-arm/cpu64.o
/scm/qemu/target-arm/cpu64.c: In function ‘aarch64_cpu_register_types’:
/scm/qemu/target-arm/cpu64.c:124:5: error: comparison of unsigned
expression < 0 is always false [-Werror=type-limits]
     for (i = 0; i < ARRAY_SIZE(aarch64_cpus); i++) {
     ^
cc1: all warnings being treated as errors

This is the result of ARRAY_SIZE being an unsigned type,
causing "i" to be promoted to unsigned int as well.

As zero size arrays are a gcc extension, it seems
cleanest to add a dummy element with NULL name,
and test for it during registration.

We'll be able to drop this when we add more CPUs.

Cc: Alexander Graf <agraf@suse.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20131223145216.GA22663@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Don't conditionalise GEM instantiation on networking attachments. The
device should always be present even if not attached to a network.

This allows for probing of the device by expectant guests (such as
OS's).  This is needed because sysbus (or AXI in Xilinx's real hw case)
is not self identifying so the guest has no dynamic way of detecting
device absence.

Also allows for testing of the GEM in loopback mode with -net none.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 55649779a68ee3ff54b24c339b6fdbdccd1f0ed7.1388800598.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

There is an inline duplication of the raw_read and raw_write function
bodies. Fix by just calling raw_read/raw_write instead.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: e69281b7e1462b346cb313cf0b89eedc0568125f.1388649290.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use c13_context field instead of c13_fcse for CONTEXTIDR register
definition.
Signed-off-by: NSergey Fedorov <s.fedorov@samsung.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1387521191-15350-1-git-send-email-s.fedorov@samsung.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If the UART back-end blocks, buffer in the Tx FIFO to try again later.
This stops the IO-thread busy waiting on char back-ends (which causes
all sorts of performance problems).
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 4bea048b3ab38425701d82ccc1ab92545c26b79c.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

uart_rx_reset() called immediately above already does this. Remove.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 05e30826496cf2579084ed801ac0b2c0d0a3071f.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Populate the TxFIFO with the Tx data before sending. Prepares
support for proper Tx flow control implementation.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: bdf7f8af2ef02839bea18665701bc2612f7baa6f.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The can_receive logic was only taking into account the RxFIFO
occupancy. RxFIFO population is only used for the echo and normal modes
however. Improve the logic to correctly return the true number of
receivable characters based on the current mode:

Normal mode: RxFIFO vacancy.
Remote loopback: TxFIFO vacancy.
Echo mode: The min of the TxFIFO and RxFIFO vacancies.
Local Loopback: Return non-zero (to implement droppage)
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 36a58440c9ca5080151e95765c2c81342de8a8df.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This tx timer implementation is flawed. Despite the controller
attempting to time the guest visable assertion of the TX-empty status
bit (and corresponding interrupt) the controller is still transmitting
characters instantaneously. There is also no sense of multiple character
delay.

The only side effect of this timer is assertion of tx-empty status. So
just remove the timer completely and hold tx-empty as permanently
asserted (its reset status). This matches the actual behaviour of
instantaneous transmission.

While we are VMSD version bumping, add the tx_fifo as device state to
prepare for upcomming TxFIFO flow control. Implement the interrupt
generation logic for the TxFIFO occupancy.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7a208a7eb8d79d6429fe28b1396c3104371807b2.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Some (interrupt) status register bits relating to the TxFIFO path were
not defined. Define them. This prepares support for proper Tx data path
flow control.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 2068b963f0af8cc834c353944e9fa816d950b163.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The status register bits are always pure functions of other device
state. Move the generation of these bits to the update_status()
function to simplify. Makes developing much easier as theres now no need
to recheck status bits on all the changes to rx/tx fifo state.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 321994929f789096975104f99c55732774be4cae.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Rename this field to match the many other uses of "rx". Xilinx
docmentation (UG585) also refers to this as "RxFIFO".
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7386d7cee0ea175f7e53ed5ff045265528d34e32.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Don't reset the uart as an init step. Register the reset function as a
proper reset fn instead.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d82cd2e65e5a6f8b6deeecb6cced61f0bf3f8c89.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This should be rechecked on bus write accesses as such accesses may
change the underlying state that generates the interrupt. Particular
relevant for when the guest touches the interrupt status or mask.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1c250cd61b7b8de492fbc8b79b8370958a56d83b.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As per current QOM conventions.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a1e31bd62e9709ffb9b3efc6c120f83f30b7a660.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When setting rounding modes we currently just hardcode the numeric values
for rounding modes in a big switch statement.

With AArch64 support coming, we will need to refer to these rounding modes
at different places throughout the code though, so let's better give them
names so we don't get confused by accident.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[WN: Commit message tweak, use names from ARM ARM.]
Signed-off-by: NWill Newton <will.newton@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This adds decoding support for C3.6.24 FP conditional select.
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This adds decoding support for C3.6.23 FP Conditional Compare.
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add decoding support for C3.6.22 Floating-point compare.
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This patch adds emulation for the fmov instruction working on scalars
with an immediate payload.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebase and use new infrastructure.]
Signed-off-by: NWill Newton <will.newton@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This patch adds emulation for the "Floating-point data-processing (3 source)"
group of instructions.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[WN: Commit message tweak, merged single and double precision patches.
 Implement using muladd as suggested by Richard Henderson.]
Signed-off-by: NWill Newton <will.newton@linaro.org>
[PMM: pull field decode up a level, use register accessors]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This patch adds emulation for the "Floating-point data-processing (2 source)"
group of instructions.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[WN: Commit message tweak, merge single and double precision patches. Rebase
 and update to new infrastructure. Incorporate FMIN/FMAX support patch by
 Michael Matz.]
Signed-off-by: NWill Newton <will.newton@linaro.org>
[PMM:
 * added convenience accessors for FP s and d regs
 * pulled the field decode and opcode validity check up a level]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Use the VFP_BINOP macro to provide helpers for min, max, minnum
and maxnum, rather than hand-rolling them. (The float64 max
version is not used by A32 but will be needed for A64.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

The A64 128 bit vector registers are stored as a pair of
uint64_t values in the register array. This means that if
we're directly loading or storing a value of size less than
64 bits we must adjust the offset appropriately to account
for whether the host is bigendian or not. Provide utility
functions to abstract away the offsetof() calculations for
the FP registers.

For do_fp_st() we can sidestep most of the issues for 64 bit
and smaller reg-to-mem transfers by always doing a 64 bit
load from the register and writing just the piece we need
to memory.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

When dumping the current CPU state, we can also get a request
to dump the FPU state along with the CPU's integer state.

Add support to dump the VFP state when that flag is set, so that
we can properly debug code that modifies floating point registers.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[WN: Commit message tweak, rebased. Output all registers, two per-line.]
Signed-off-by: NWill Newton <will.newton@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add a config for aarch64-linux-user, thereby enabling it as
a valid target.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Now the AArch64 targets are in mainline we can include them in our
Travis test matrix.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use the helpers provided for getting the correct FPSR and FPCR
values for the signal context.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

The AArch64 linux-user support was written before but merged after
commit 4ce6243d which cleaned up the handling of the clone()
syscall argument order, so we failed to notice that AArch64 also needs
TARGET_CLONE_BACKWARDS to be defined. Add this define so that clone
and fork syscalls work correctly.
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This implement exclusive loads/stores for aarch64 along the lines of
arm32 and ppc implementations. The exclusive load remembers the address
and loaded value. The exclusive store throws an an exception which uses
those values to check for equality in a proper exclusive region.

This is not actually the architecture mandated semantics (for either
AArch32 or AArch64) but it is close enough for typical guest code
sequences to work correctly, and saves us from having to monitor all
guest stores. It's fairly easy to come up with test cases where we
don't behave like hardware - we don't for example model cache line
behaviour. However in the common patterns this works, and the existing
32 bit ARM exclusive access implementation has the same limitations.

AArch64 also implements new acquire/release loads/stores (which may be
either exclusive or non-exclusive). These imposes extra ordering
constraints on memory operations (ie they act as if they have an implicit
barrier built into them). As TCG is single-threaded all our barriers
are no-ops, so these just behave like normal loads and stores.
Signed-off-by: NMichael Matz <matz@suse.de>
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

In preparation for adding support for A64 load/store exclusive instructions,
widen the fields in the CPU state struct that deal with address and data values
for exclusives from 32 to 64 bits. Although in practice AArch64 and AArch32
exclusive accesses will be generally separate there are some odd theoretical
corner cases (eg you should be able to do the exclusive load in AArch32, take
an exception to AArch64 and successfully do the store exclusive there), and it's
also easier to reason about.

The changes in semantics for the variables are:
 exclusive_addr  -> extended to 64 bits; -1ULL for "monitor lost",
   otherwise always < 2^32 for AArch32
 exclusive_val   -> extended to 64 bits. 64 bit exclusives in AArch32 now
   use the high half of exclusive_val instead of a separate exclusive_high
 exclusive_high  -> is no longer used in AArch32; extended to 64 bits as
   it will be needed for AArch64's pair-of-64-bit-values exclusives.
 exclusive_test  -> extended to 64 bits, as it is an address. Since this is
   a linux-user-only field, in arm-linux-user it will always have the top
   32 bits zero.
 exclusive_info  -> stays 32 bits, as it is neither data nor address, but
   simply holds register indexes etc. AArch64 will be able to fit all its
   information into 32 bits as well.

Note that the refactoring of gen_store_exclusive() coincidentally fixes
a minor bug where ldrexd would incorrectly update the first CPU register
even if the load for the second register faulted.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Adds support for Load Register (literal), both normal
and SIMD/FP forms.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

this patch adds support for C3.5.4 - C3.5.5
Conditional compare (both immediate and register)
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>