- 31 8月, 2013 2 次提交
-
-
由 Andreas Färber 提交于
To be passed to object_initialize(). Since commit 39355c38 the argument is void*, so drop some superfluous (BusState *) casts or direct parent field usages. Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
To be passed to qbus_create_inplace(). Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 30 7月, 2013 2 次提交
-
-
由 Andreas Färber 提交于
Move PCIEPort's "port" property to the new type, same for "aer_log_max". Move PCIESlot's "chassis" and "slot" properties to the new type. Reviewed-by: NDon Koch <dkoch@verizon.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Introduce TYPE_PCI_BRIDGE as base type and use PCI_BRIDGE() casts. Reviewed-by: NDon Koch <dkoch@verizon.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> [AF: Updated pbm-bridge parent to TYPE_PCI_BRIDGE] Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 23 7月, 2013 1 次提交
-
-
由 Andreas Färber 提交于
Let scsi_bus_legacy_add_drive() and scsi_bus_legacy_handle_cmdline() return an Error**. Prepare qdev initfns for QOM realize error model. Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 10 7月, 2013 1 次提交
-
-
由 Don Koch 提交于
Fix for LP#1187529: Devices on PCI bridge stop working when live-migrated. Update bridge mappings for all PCI bridge devices in get_pci_config_device(). Signed-off-by: NDon Koch <dkoch@verizon.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 08 7月, 2013 8 次提交
-
-
由 David Gibson 提交于
The host_buses list is an odd structure - a list of pointers to PCI root buses existing in parallel to the normal qdev tree structure. This patch removes it, instead putting the link pointers into the PCIHostState structure, which have a 1:1 relationship to PCIHostBus structures anyway. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 David Gibson 提交于
There are now no users of the domain field of PCIHostBus, so remove it from the structure, and as a parameter from the pci_host_bus_register() function which sets it. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 David Gibson 提交于
Currently pci_find_primary_bus() searches the list of root buses for one with domain 0. But since host buses are always registered with domain 0, this just amounts to finding the only PCI host bus. The only remaining users of pci_find_primary_bus() are in pci-hotplug-old.c, which implements the old style pci_add/pci_del commands. Therefore, this patch redefines pci_find_primary_bus() to find the only PCI root bus, returning an error if there are multiple roots. The callers in pci-hotplug-old.c are updated correspondingly, to produce sensible error messages. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 David Gibson 提交于
At present, pci_nic_init() and pci_nic_init_nofail() assume that they will only create a NIC under the primary PCI root. As we add support for multiple PCI roots, that may no longer be the case. This patch adds a root bus parameter to pci_nic_init() (and updates callers accordingly) to allow the machine init code using it to specify the right PCI root for NICs created by old-style -net nic parameters. NICs created new-style, with -device can of course be put anywhere. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 David Gibson 提交于
pci_get_bus_devfn() interprets a full PCI address string to give a PCIBus * and device/function number within that bus. Currently it assumes it is working on an address under the primary PCI root bus. This patch extends it to allow the caller to specify a root bus. This might seem a little odd since the supplied address can (theoretically) include a PCI domain number. However, attempting to use a non-zero domain number there is currently an error, so that shouldn't really cause problems. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 David Gibson 提交于
pci_find_domain() is used in a number of places where we want an id for a whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is that many platforms may support multiple independent host bridges with no hardware supplied notion of domain number. This patch, therefore, replaces calls to pci_find_domain() with calls to a new pci_root_bus_path() returning a string. The new call is implemented in terms of a new callback in the host bridge class, so it can be defined in some way that's well defined for the platform. When no callback is available we fall back on the qbus name. Most current uses of pci_find_domain() are for error or informational messages, so the change in identifiers should be harmless. The exception is pci_get_dev_path(), whose results form part of migration streams. To maintain compatibility with old migration streams, the PIIX PCI host is altered to always supply "0000" for this path, which matches the old domain number (since the code didn't actually support domains other than 0). For the pseries (spapr) PCI bridge we use a different platform-unique identifier (pseries machines can routinely have dozens of PCI host bridges). Theoretically that breaks migration streams, but given that we don't yet have migration support for pseries, it doesn't matter. Any other machines that have working migration support including PCI devices will need to be updated to maintain migration stream compatibility. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 David Gibson 提交于
Currently pci_find_domain() performs two functions - it locates the PCI root bus above the given bus, then looks up that root bus's domain number. This patch adds a helper function to perform the first task, finding the root bus for a given PCI device. This is then used in pci_find_domain(). This changes pci_find_domain()'s signature slightly, taking a PCIDevice instead of a PCIBus - since all callers passed something of the form dev->bus, this simplifies things slightly. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 David Gibson 提交于
pci_find_root_bus() takes a domain parameter. Currently PCI root buses with domain other than 0 can't be created, so this is more or less a long winded way of retrieving the main PCI root bus. Numbered domains don't actually properly cover the (non x86) possibilities for multiple PCI root buses, so this patch for now enforces the domain == 0 restriction in other places to replace pci_find_root_bus() with an explicit pci_find_primary_bus(). Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 04 7月, 2013 4 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 David Gibson 提交于
pci_read_devaddr() is only used by the legacy functions for the old PCI hotplug interface in pci-hotplug-old.c. So we move the function there, and make it static. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 David Gibson 提交于
pci-hotplug.c and the CONFIG_PCI_HOTPLUG variable which controls its compilation are misnamed. They're not about PCI hotplug in general, but rather about the pci_add/pci_del interface which are now deprecated in favour of the more general device_add/device_del interface. This patch therefore renames them to pci-hotplug-old.c and CONFIG_PCI_HOTPLUG_OLD. CONFIG_PCI_HOTPLUG=y was listed twice in {i386,x86_64}-softmmu.make for no particular reason, so we clean that up too. In addition it was included in ppc64-softmmu.mak for which the old hotplug interface was never used and is unsuitable, so we remove that too. Most of pci-hotplug.c was additionaly protected by #ifdef TARGET_I386. The small piece which wasn't is only called from the pci_add and pci_del hooks in hmp-commands.hx, which themselves were protected by #ifdef TARGET_I386. This patch therefore also removes the #ifdef from pci-hotplug-old.c, and changes the ifdefs in hmp-commands.hx to use CONFIG_PCI_HOTPLUG_OLD. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 20 6月, 2013 4 次提交
-
-
由 Alexey Kardashevskiy 提交于
The "info mtree" command in QEMU console prints only "memory" and "I/O" address spaces while there are actually a lot more other AddressSpace structs created by PCI and VIO devices. Those devices do not normally have names and therefore not present in "info mtree" output. The patch fixes this. Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The DMAContext is a simple pointer to an AddressSpace that is now always already available. Make everyone hold the address space directly, and clean up the DMA API to use the AddressSpace directly. Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Avi Kivity 提交于
Use the new iommu support in the memory core for iommu support. The only user, spapr, is also converted, but it still provides a DMAContext interface until the non-PCI bits switch to AddressSpace. Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAvi Kivity <avi.kivity@gmail.com> [ Do not calls memory_region_del_subregion() on the device's bus_master_enable_region, it is an alias; return an AddressSpace from the IOMMU hook and remove the destructor hook. - David Gibson ] Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The translate function in the DMAContext is now always NULL. Remove every reference to it. Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 07 6月, 2013 1 次提交
-
-
由 Andreas Färber 提交于
Use QOM cast macros I2C_BUS(), SSI_BUS(), PCI_BUS() instead. Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 03 6月, 2013 1 次提交
-
-
由 Gerd Hoffmann 提交于
Using a trick cut+pasted from vmstate_scsi_device to wind up msix_save and msix_load. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 25 5月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 09 4月, 2013 4 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 06 4月, 2013 1 次提交
-
-
由 Kevin Wolf 提交于
usb-storage takes care to fetch the USB serial number from -drive options, but it neglected to pass its own 'serial' property to the scsi-disk it creates. With this patch, the 'serial' qdev property and the 'serial' option in -drive behave the same and correctly apply the serial number on both USB and SCSI level. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Acked-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 27 3月, 2013 10 次提交
-
-
由 Alex Williamson 提交于
Fix the awkward API of mangling the caller specified PCIe type and just provide an interface to initialize an endpoint device. This will pick either a regular endpoint or integrated endpoint based on the bus and return pcie_cap_init to doing exactly what is asked. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alex Williamson 提交于
Windows will fail to start drivers for devices with an Endpoint type PCIe capability attached to a Root Complex (code 10 - Device cannot start). The proper type for such a device is Root Complex Integrated Endpoint. Devices don't care which they are, so do this conversion automatically. This allows the Windows driver to load for nec-usb-xhci when attached to pcie.0 of a q35 machine. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alex Williamson 提交于
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alex Williamson 提交于
For testing the bus type. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alex Williamson 提交于
No change to any types. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alex Williamson 提交于
Move these so that we can reference them from a more common header instead of including pci_bus.h everywhere. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alex Williamson 提交于
This will allow us to differentiate Express and Legacy buses. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Stefan Hajnoczi 提交于
A zero size ROM file is invalid and should produce a warning. Attempting to use a zero size file ends up hitting an assertion qemu_ram_set_idstr() because RAMBlocks with duplicate addresses are allocated - due to zero size the allocator doesn't increment the next available RAMBlock offset. Also convert __FUNCTION__ to __func__ while we're touching this code. There are no other __FUNCTION__ instances in pci.c anymore. Reported-by: NMilos Ivanovic <milosivanovic@orcon.net.nz> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alex Williamson 提交于
The PCI bridge spec defines a default swizzle for translating INTx IRQs from secondary bus to primary. Use this by default for any bridge that doesn't set a function. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alex Williamson 提交于
For some reason we recurse to fire the INTx routing notifier for each child of a bus, for each possible device of a bus. That means that if we add a root port, the notifier gets called for that bridge 256 times. If we add an upstream switch behind that root port, 256^2. But of course we need a downstream switch, 256^3. This starts to be noticeable. Stop the insanity. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-