- truncate and sign or zero extend operands before multiplication
- factor out common code to gen_op_multiply() with parameter to sign/zero extend
- call gen_op_multiply from gen_op_umul and gen_op_smul
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- truncate second operand to 32bit
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- implemented block load/store primary/secondary with user privilege
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- use symbolic name for MMU index
v0->v1:
- change debug traces to DPRINTF_MMU
- fix debug trace function names
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- rearrange code to break from switch when appropriate
- allow deprecated ldfsr insn
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- change return type of ldl_* to uint32_t to prevent unwanted sign extension
  visible in sparc64 load alternate address space methods
- note this change makes ldl_* softmmu implementations match ldl_phys one
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- address masking for ldqf and stqf insns
- address masking for lddf and stdf insns
- address masking for translating ASI (Ultrasparc IIi)
v0->v1:
- move arch-specific code to helpers and drop more ifdefs at call sites
  using new helper asi_address_mask()
- change user emulation to use asi_address_mask()
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- set mmu tag access register on FAULT and PROT traps as well
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

vnc-encodings-*.c dependencies where missing.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

While couting color, if the third color was only present one
time it wasn't added to the palette.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

A simple patch would have been to just remove count -= 1, but this
one also replace the while (count--) with a for(i = 0; i < count; i++)
which I believe is more easy to understand.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Previous commit added QMP documentation to the qemu-monitor.hx
file, it's is a copy of this information.

While it's good to keep it near code, maintaining two copies of
the same information is too hard and has little benefit as we
don't expect client writers to consult the code to find how to
use a QMP command.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

One of the most important missing feature in QMP today is its
supported commands documentation.

The plan is to make it part of self-description support, however
self-description is a big task we have been postponing for a
long time now and still don't know when it's going to be done.

In order not to compromise QMP adoption and make users' life easier,
this commit adds a simple text documentation which fully describes
all QMP supported commands.

This is not ideal for a number of reasons (harder to maintain,
text-only, etc) but does improve the current situation. To avoid at
least divering from the user monitor help and texi snippets, QMP bits
are also maintained inside qemu-monitor.hx, and hxtool is extended to
generate a single text file from them.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Push the doc fragments for the info command to the end of
qemu-monitor.hx. This helps to establish a proper layout in the upcoming
QMP documentation.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This make sure we send a desktop resize message only in case we actually
have to, using the new variables which track the clients desktop size.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Don't send updates for screen areas which are outside the clients
desktop.  May happed with vnc clients which don't support the desktop
resize message.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add two new variables to keep track of the vnc clients desktop size.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In case the desktop did resize while the vnc connection setup was still
in progress the client isn't informed about it.  Send a desktop resize
event as soon as the client told us it can handle deskop resize via set
encodings message to make sure the client us up to date.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Makes qemu_default_pixelformat(15) return pixelformat filled for 15 bit
color depth (16 bpp, 5 bits for red,green,blue each, 1 bit unused).
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Other vga_hw_* functions do the same.
Fixes a segmentation fault.  Trigger: boot with -nodefaults,
then connect via vnc.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When a page with all identical bytes is transferred, it is counted
as a full page (TARGET_PAGE_SIZE) although only one byte is actually
sent. Fix this by changing ram_save_block() to return the number of
bytes sent instead of a boolean value. This makes bandwidth
estimation, and consequently downtime estimation, more precise.
Signed-off-by: NPierre Riteau <Pierre.Riteau@irisa.fr>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fix for too small allocation to ports_map
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Create a kvm32 CPU model that describes a least common denominator
for KVM capable guest CPUs. Useful for migration purposes.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add palette tight encoding. Palette encoding will try to count the number
of colors for a given rectangle, and if this number is low enough
(< 256) it will send the palette + the rectangle with indexed colors.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fill encoding detects rectangles using only one color and send only
one pixel value.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add support for tight encoding [1]. This patch only add support
for "basic" tight compression without any filter.

[1] http://tigervnc.org/cgi-bin/rfbproto#tight-encoding.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Some encodings like tight supports tiling (spliting in
multiple sub-rectangles). So we needed a way to tell
vnc_update_client() how much rectangles are in the buffer.

zlib, raw and hextile always send a full rectangle.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Makes sure we free all ressources used in zlib encoding (zlib stream
and buffer).
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add a buffer_free() helper to free vnc buffers and
remove some duplicated code in vnc_disconnect_finish().
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

On init, values are already NULL, but we shouldn't try
to reset them each time a client send a set encoding
command because this break everything. For example,
libvncclient re-send a set encoding command if the
framebuffer is resized.

This fix framebuffer resizing for zlib encoding.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Adjust zlib compression level if needed by calling deflateParams.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

According to http://tigervnc.org/cgi-bin/rfbproto#zlib-encoding
zlib encoding only uses a single stream. Current implementation defines
4 streams but only uses the first one. Remove them and only use a single
stream.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

send_framebuffer_update() was calling hextile instead of zlib
since commit 70a4568f.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add a small comment to explain why we need to start from
the end of the array to set the right prefered encoding.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch was wrong, because the loop was already reversed,
so the first encoding was correctly set at the end of the loopp.

This reverts commit 14eb8b68.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add a DPRINTF macro, use it also to see irq deliveries.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Commit 213acd2e introduced leul_to_cpu with a special code path for big endian
hosts. Unfortunately that code used preprocessor magic that didn't work.

This patch replaces the explicit ##s by glue() which is proven to work reliably,
enabling me to compile qemu on ppc again.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>