Although there is no difference, other migration related code use
qemu_free(), and it should be better to be consistent.
Signed-off-by: NYoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add support for the rx fifo to speed up bulk transfers.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@axis.com>

This makes the RAM block list easier to manipulate.  Also incorporate
relevant variables into the RAMList struct.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Acked-by: NChris Wright <chrisw@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

To hot-unplug guest and host part of a network device, you do:

    device_del NIC-ID
    netdev_del NETDEV-ID

For PCI devices, device_del merely tells ACPI to unplug the device.
The device goes away for real only after the guest processed the ACPI
unplug event.

You have to wait until then (e.g. by polling info pci) before you can
unplug the netdev.  Not good.

Fix by removing the "in use" check from do_netdev_del().  Deleting a
netdev while it's in use is safe; packets simply get routed to the bit
bucket.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently HPET ACPI table is created regardless of whether qemu actually
created hpet device. This may confuse some guests that don't check that
hpet is functional before using it. Solve this by passing info about
hpets in qemu to seabios via fw config interface. Additional benefit is
that seabios no longer uses hard coded hpet configuration. Proposed
interface supports up to 8 hpets. This is the number defined by hpet
spec.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The capability register is read-only from guest POV, so we do not need
to update it on reset.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When dest is NULL, i.e. a new copy of the list is created, we don't get a
properly terminated list after the realloc. Initialize it as an empty list.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Change #define DEBUG to #define E1000_DEBUG in hw/e1000.c to make
it possible to build QEMU with -DDEBUG
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Remove unused DEBUG defines from hw/msix.c to avoid having anything
define the word DEBUG without any additions such as MSIX_DEBUG.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Conflicts:
	hw/pc.c

Ignore high address bits when PCI memory window is not mapped on a page
boundary.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Move inclusion of stdbool.h to common header files, instead of including
in an ad-hoc manner.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

This command was of minimal use before, now it is useless as the hpet
become a qdev device and is thus easily discoverable. We should
definitely not set query-hpet in QMP's stone, and there is also no good
reason to keep it for the interactive monitor.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This implements the HPET capability of routing IRQs to the front-side
bus, aka MSI support. This feature can be enabled via the qdev property
"msi" and is off by default.

Note that switching it on can cause guests (at least Linux) to use the
HPET as timer instead of the LAPIC. KVM users should recall that only
the latter is currently available as fast in-kernel model.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

One HPET block supports up to 32 timers. Allow to instantiate more than
the recommended and implemented minimum of 3. The number is configured
via the qdev property "timers". It is also saved/restored so that it
need not match between migration peers.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Required for hpet.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

By implementing this feature we can also remove a nasty way to kill qemu
(by trying to enable level-triggered hpet interrupts).
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Instead of keeping a static reference around, pass the state to
hpet_enabled and hpet_get_ticks. All callers now have it at hand. Will
once allow to instantiate the HPET more than a single time.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Allow the intercept the RTC IRQ for the HPET legacy mode. Then push
routing to IRQ8 completely into the HPET. This allows to turn
hpet_in_legacy_mode() into a private function. Furthermore, this stops
the RTC from clearing IRQ8 even if the HPET is in control.

This patch comes with a side effect: The RTC timers will no longer be
stoppend when there is no IRQ consumer, possibly causing a minor
performance degration. But as the guest may want to redirect the RTC to
the SCI in that mode, it should normally disable unused IRQ source
anyway.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

We have to update the qemu timer when the per-timer enable bit is
toggled, just like for HPET_CFG_ENABLE changes.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Register the HPET as a sysbus device and create it that way. As it can
route its IRQs to any ISA IRQ, we need to connect it to all 24 of them.
Once converted to qdev, we can move reset handler and vmstate
registration into its hands as well.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Properly initialize HPETTimer::tn and HPETTimer::state once during
hpet_init instead of (re-)writing them on every reset.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Setting the main counter while the HPET is enabled may not be a good
idea of the guest, but it is supported and should, thus, not spam the
host console with warnings.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This moves the private HPET structures into the C module, simplifies
some helper functions and fixes most coding style issues (biggest chunk
was improper switch-case indention). No functional changes.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Also prevent out-of-bounds write access to the timers but don't spam the
host console if it triggers.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Only match on true dir variable assignments, avoid generating garbage
due to the "# Configured with: ..." line which may contain "*dir=" as
well.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

OS specific files are not target dependent, so they can be compiled
once for all targets.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move handling to change process name to POSIX specific files
plus add a better error message to cover the case where the
feature isn't supported.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move line-buffering setup to OS specific files.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

os_change_process_uid() and os_change_root() are now only called
from os-posix.c, so no need to keep win32 stubs for them.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move daemonize handling from vl.c to OS specific files. Provide dummy
stubs for Win32.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move chroot handling to OS specific files.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move code to handle runas, ie. change of user id of QEMU process
to OS specific files and provide dummy stub for Win32.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Introduce OS specific cmdline argument handling by calling
os_parse_cmd_args() at the end of switch() statement. Move option
enum to qemu-options.h and have it included from os-posix.c and
os-win32.c in addition to vl.c.

In addition move SMB argument to os-posix.c
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Rename qemu-options.h to qemu-options.def as it is not a header file
for general use and this leaves space for a proper qemu-options.h
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This moves the win32 and POSIX versions of find_datadir() to OS
specific files, and removes some #ifdef clutter from vl.c
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move main signal handler setup to os specific files.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Rename os_setup_signal_handling() to os_setup_early_signal_handling()
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>