Cc: Paul Brook <paul@codesourcery.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.

This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Support for helper functions with 5 arguments was missing
in the code generator and in the interpreter.

There is no need to pass the constant TCG_AREG0 from the
code generator to the interpreter. Remove that code for
the INDEX_op_qemu_st* opcodes.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Added an option to let qemu transfer a configuration file to bios,
"etc/boot-fail-wait", which could be specified by command
    -boot reboot-timeout=T
T have a max value of 0xffff, unit is ms.

With this option, guest will wait for a given time if not find
bootabled device, then reboot. If reboot-timeout is '-1', guest
will not reboot, qemu passes '-1' to bios by default.

This feature need the new seabios's support.

Seabios pulls the value from the fwcfg "file" interface, this
interface is used because SeaBIOS needs a reliable way of
obtaining a name, value size, and value. It in no way requires
that there be a real file on the user's host machine.
Signed-off-by: NAmos Kong <akong@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

getaddrinfo can give us a list of addresses, but we only try to
connect to the first one. If that fails we never proceed to
the next one.  This is common on desktop setups that often have ipv6
configured but not actually working.

To fix this make inet_connect_nonblocking retry connection with a different
address.
callers on inet_nonblocking_connect register a callback function that will
be called when connect opertion completes, in case of failure the fd will have
a negative value
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

No need to add non blocking parameters to the blocking inet_connect
add block parameter for inet_connect_opts instead of using QemuOpt "block".
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

refactor address resolution code to fix nonblocking connect
remove getnameinfo call
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAmos Kong <akong@redhat.com>
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The old code aborted configure when no emulation target was selected.
Even after removing the 'exit 1', it tried to read from STDIN
when QEMU was configured with

    configure' '--disable-user' '--disable-system'

This is fixed here.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds a "use64" property which will make the ivshmem driver
register a 64bit memory bar when set, so you have something to play with
when testing 64bit pci bits.  It also allows to have quite big shared
memory regions, like this:

[root@fedora ~]# lspci -vs1:1
01:01.0 RAM memory: Red Hat, Inc Device 1110
        Subsystem: Red Hat, Inc Device 1100
        Physical Slot: 1-1
        Flags: fast devsel
        Memory at fd400000 (32-bit, non-prefetchable) [disabled] [size=256]
        Memory at 8040000000 (64-bit, prefetchable) [size=1G]

[ v5: rebase, update compat property for post-1.2 merge ]
[ v4: rebase & adapt to latest master again ]
[ v3: rebase & adapt to latest master ]
[ v2: default to on as suggested by avi,
      turn off for pc-$old using compat property ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NCam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

All deps that used global qemu_system_powerdown var are now converted
to notifiers, so remove it.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In addition, there is no need to allocate an extra irq just for
rising SCI in irq handler. Just rise SCI right from notifier
handler instead.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Notifier will be used for signaling powerdown request to guest in
a more general way and intended to replace very specific
qemu_irq_rise(qemu_system_powerdown) and will allow to remove global
variable qemu_system_powerdown.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* origin/master:
  tcg/i386: fix build with -march < i686
  tcg: Streamline movcond_i64 using movcond_i32
  tcg: Streamline movcond_i64 using 32-bit arithmetic
  tcg: Sanity check goto_tb input
  tcg: Sanity check deposit inputs
  tcg: Add tcg_debug_assert
  tcg: Implement concat*_i64 with deposit_i64
  tcg: Emit XORI as NOT for appropriate constants
  tcg: Optimize initial inputs for ori_i64
  tcg: Emit ANDI as EXTU for appropriate constants
  tcg: Adjust descriptions of *cond opcodes
  tcg/mips: fix MIPS32(R2) detection

The movcond_i32 op has to be protected with TCG_TARGET_HAS_movcond_i32
to fix the build with -march < i686.

Thanks to Richard Henderson for the hint.
Reported-by: NAlex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When movcond_i32 is available we can further reduce the generated
op count from 12 to 6, and the generated code size on i686 from
88 to 74 bytes.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Avoiding 64-bit arithmetic (outside of the compare) reduces the
generated op count from 15 to 12, and the generated code size on
i686 from 105 to 88 bytes.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Checking that we don't try for idx != [01] is trivial.  Checking
that we don't issue more than one of any index requires a tad
more data and some ifdefs protecting that new variable.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Given these are constants, checking once here means everything
after can assume they're correct.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Like the C assert macro, except only enabled for CONFIG_DEBUG_TCG,
and without having to set _NDEBUG and disable all other asserts at
the same time.

The use of __builtin_unreachable (when available) gives the compiler
the same information, which may (or may not) help it optimize better.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

For tcg_gen_concat_i32_i64 we only use deposit if the host supports it.
For tcg_gen_concat32_i64 even if the host does not, as we get identical
code before and after.

Note that this relies on the ANDI -> EXTU patch for the identity claim.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Note that xori_i64 failed to perform even the minimal
optimizations promised by the README.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Copy the same optimizations from ori_i32.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Note that andi_i64 failed to perform even the minimal
optimizations promised by the README.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The README file documented the operand ordering of the tcg_gen_*
functions.  Since we're documenting opcodes here, use the true
operand ordering.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Cc: malc <av1474@comtv.ru>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix the MIPS32(R2) cpu detection so that it also works with
-march=octeon. Thanks to Andrew Pinski for the hint.

Cc: Andrew Pinski <apinski@cavium.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

* kwolf/for-anthony:
  block: remove keep_read_only flag from BlockDriverState struct
  block: convert bdrv_commit() to use bdrv_reopen()
  block: vpc image file reopen
  block: vdi image file reopen
  block: vmdk image file reopen
  block: qcow image file reopen
  block: qcow2 image file reopen
  block: qed image file reopen
  block: raw image file reopen
  block: raw-posix image file reopen
  block: purge s->aligned_buf and s->aligned_buf_size from raw-posix.c
  block: use BDRV_O_NOCACHE instead of s->aligned_buf in raw-posix.c
  block: do not parse BDRV_O_CACHE_WB in block drivers
  block: move open flag parsing in raw block drivers to helper functions
  block: move aio initialization into a helper function
  block: Framework for reopening files safely
  block: make bdrv_set_enable_write_cache() modify open_flags
  block: correctly set the keep_read_only flag
  blockdev: preserve readonly and snapshot states across media changes

* stefanha/trivial-patches:
  w32: Always use standard instead of native format strings
  net/socket: Fix compiler warning (regression for MinGW)
  linux-user: Remove redundant null check and replace free by g_free
  qemu-timer: simplify qemu_run_timers
  TextConsole: saturate escape parameter in TTY_STATE_CSI
  curses: don't initialize curses when qemu is daemonized
  dtrace backend: add function to reserved words
  pflash_cfi01: Fix warning caused by unreachable code
  ioh3420: Remove unreachable code
  lm4549: Fix buffer overflow
  cadence_uart: Fix buffer overflow
  qemu-sockets: Fix potential memory leak
  qemu-ga: Remove unreachable code after g_error
  target-i386: Allow tsc-frequency to be larger then 2.147G

* afaerber/qom-cpu:
  target-alpha: Initialize env->cpu_model_str
  target-i386: Drop unused setscalar() macro
  target-i386: Kill cpudef config section support
  target-i386: x86_cpudef_setup() coding style change
  Eliminate cpus-x86_64.conf file
  target-i386: Move CPU models from cpus-x86_64.conf to C
  target-i386: Add missing CPUID_* constants
  Drop cpu_list_id macro
  target-i386: Fold -cpu ?cpuid, ?model output into -cpu help, drop ?dump
  MAINTAINERS: Add entry for QOM CPU

* bonzini/scsi-next:
  SCSI: Standard INQUIRY data should report HiSup flag as set.
  scsi-disk: use scsi_data_cdb_length
  scsi: introduce scsi_cdb_length and scsi_data_cdb_length
  scsi-disk: fix check for out-of-range LBA
  scsi-disk: introduce check_lba_range
  iSCSI: We dont need to explicitely call qemu_notify_event() any more
  iSCSI: We need to support SG_IO also from iscsi_ioctl()

* bonzini/nbd-next:
  nbd: add nbd_export_get_blockdev
  nbd: negotiate with named exports
  nbd: register named exports
  qemu-nbd: rewrite termination conditions to use a state machine
  nbd: add notification for closing an NBDExport
  nbd: track clients into NBDExport
  nbd: add reference counting to NBDExport
  nbd: do not leak nbd_trip coroutines when a connection is torn down
  nbd: make refcount interface public
  nbd: do not close BlockDriverState in nbd_export_close
  nbd: pass NBDClient to nbd_send_negotiate
  nbd: add more constants

The keep_read_only flag is no longer used, in favor of the bdrv
flag BDRV_O_ALLOW_RDWR.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently, bdrv_commit() reopens images r/w itself, via risky
_delete() and _open() calls. Use the new safe method for drive reopen.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There is currently nothing that needs to be done for VPC image
file reopen.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There is currently nothing that needs to be done for VDI reopen.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch supports reopen for VMDK image files.  VMDK extents are added
to the existing reopen queue, so that the transactional model of reopen
is maintained with multiple image files.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>