Apparently introduced in commit a4f90923.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180326172041.21009-1-marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

A fix for dirty bitmap migration through shared storage, and a VMDK
patch keeping us from creating too large extents.

# gpg: Signature made Mon 26 Mar 2018 21:17:05 BST
# gpg:                using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2018-03-26:
  vmdk: return ERROR when cluster sector is larger than vmdk limitation
  iotests: enable shared migration cases in 169
  qcow2: fix bitmaps loading when bitmaps already exist
  qcow2-bitmap: add qcow2_reopen_bitmaps_rw_hint()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix glibc 2.27 for hppa-linux-user

# gpg: Signature made Mon 26 Mar 2018 17:48:19 BST
# gpg:                using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-hppa-20180327:
  target/hppa: Include priv level in user-only iaoq
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix a decodetree problem with 16-bit insns

# gpg: Signature made Mon 26 Mar 2018 15:35:04 BST
# gpg:                using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-dt-20180326:
  scripts/decodetree: Fix insnmask not marked as global in main()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

VMDK has a hard limitation of extent size, which is due to the size of grain
table entry is 32 bits. It means it can only point to a grain located at
offset = 2^32. To avoid writing the user data beyond limitation and record a useless offset
in grain table. We should return ERROR here.
Signed-off-by: Nyuchenlin <yuchenlin@synology.com>
Message-id: 20180322133337.28024-1-yuchenlin@synology.com
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Shared migration for dirty bitmaps is fixed by previous patches,
so we can enable the test.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180320170521.32152-5-vsementsov@virtuozzo.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

On reopen with existing bitmaps, instead of loading bitmaps, lets
reopen them if needed. This also fixes bitmaps migration through
shared storage.
Consider the case. Persistent bitmaps are stored on bdrv_inactivate.
Then, on destination process_incoming_migration_bh() calls
bdrv_invalidate_cache_all() which leads to
qcow2_load_autoloading_dirty_bitmaps() which fails if bitmaps are
already loaded on destination start.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180320170521.32152-3-vsementsov@virtuozzo.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Add version of qcow2_reopen_bitmaps_rw, which do the same work but
also return a hint about was header updated or not. This will be
used in the following fix for bitmaps reloading after migration.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 20180320170521.32152-2-vsementsov@virtuozzo.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Block layer patches

# gpg: Signature made Mon 26 Mar 2018 15:33:01 BST
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  qemu-iotests: Test vhdx image creation with QMP
  vhdx: Check for 4 GB maximum log size on creation
  vhdx: Don't use error_setg_errno() with constant errno
  vhdx: Require power-of-two block size on create
  qemu-iotests: Test parallels image creation with QMP
  parallels: Check maximum cluster size on create
  qemu-iotests: Test invalid resize on luks
  luks: Turn another invalid assertion into check
  qemu-iotests: Enable 025 for luks
  qemu-iotests: Test vdi image creation with QMP
  vdi: Fix build with CONFIG_VDI_DEBUG
  vdi: Change 'static' create option to 'preallocation' in QMP
  qcow2: Reset free_cluster_index when allocating a new refcount block
  include/block/block_int: Document protocol related functions
  block/blkreplay: Remove protocol-related fields
  block/throttle: Remove protocol-related fields
  block/quorum: Remove protocol-related fields
  block/replication: Remove protocol_name field
  iotests: 163 is not quick
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

A recent glibc change relies on the fact that the iaoq must be 3,
and computes an address based on that.  QEMU had been ignoring the
priv level for user-only, which produced an incorrect address.
Reported-by: NJohn David Anglin <dave.anglin@bell.net>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

if '-w 16' was given as a cmdline args a local copy of insnmask
is set and not the global one.
Signed-off-by: NPeer Adelt <peer.adelt@hni.uni-paderborn.de>
Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20180319115846.9662-1-kbastian@mail.uni-paderborn.de>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Miscellaenous bugfixes, including crash fixes from Alexey, Peter M. and
Thomas.

# gpg: Signature made Mon 26 Mar 2018 13:37:38 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  qemu-pr-helper: Actually allow users to specify pidfile
  chardev/char-fe: Allow NULL chardev in qemu_chr_fe_init()
  iothread: fix breakage on windows
  scsi: turn "is this a SCSI device?" into a conditional hint
  chardev-socket: remove useless if
  tcg: Really fix cpu_io_recompile
  vhost-user-test: add back memfd check
  vhost-user-test: do not hang if chardev creation failed
  scripts/device-crash-test: Remove fixed isapc-with-iommu entry
  hw/audio: Fix crashes when devices are used on ISA bus without DMA
  fdc: Exit if ISA controller does not support DMA
  hw/net/can: Fix segfaults when using the devices without bus
  WHPX improve vcpu_post_run perf
  WHPX fix WHvSetPartitionProperty in PropertyCode
  WHPX fix WHvGetCapability out WrittenSizeInBytes
  scripts/get_maintainer.pl: Print proper error message for missing $file
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Due to wrong specification of arguments to getopt_long() any
attempt to set pidfile resulted in:

1) the default to be leaked
2) the @pidfile variable to be set to NULL (because optarg is
NULL without this patch).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Message-Id: <6f10cd53d361a395aa0e85a9311ec4e9a8fc11e5.1521868451.git.mprivozn@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

All the functions in char-fe.c handle the CharBackend
having a NULL Chardev pointer, which means that the
backend exists but is not connected to anything. The
exception is qemu_chr_fe_init(), which will crash if
passed a NULL Chardev pointer argument. This can happen
for various boards if they're started with 'nodefaults':
 arm-softmmu/qemu-system-arm -S -nodefaults -M cubieboard
 riscv32-softmmu/qemu-system-riscv32 -nodefaults -M sifive_e

Make qemu_chr_fe_init() accept a NULL chardev. This allows
UART models to handle NULL chardev properties without
generally needing to special case them or to manually
create a NullChardev.
Reported-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <20180323152948.27048-1-peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

OOB can enable iothread for parsing even on Windows.  We need some tunes
to enable that on Windows otherwise it'll break Windows users.  This
patch fixes the breakage on Windows with qemu-system-ppc.exe.
Reported-by: NHoward Spoelstra <hsp.cat7@gmail.com>
Tested-by: NHoward Spoelstra <hsp.cat7@gmail.com>
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20180322085630.23654-1-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If the user does not have permissions to send ioctls to the device (due to
SELinux or cgroups, for example), the output can look like

qemu-kvm: -device scsi-block,drive=disk: cannot get SG_IO version number:
  Operation not permitted.  Is this a SCSI device?

but this is confusing because the ioctl was blocked _before_ the device
even received the SG_GET_VERSION_NUM ioctl.  Therefore, for EPERM errors
the suggestion should be eliminated.  To make that simpler, change the
code to use error_append_hint.
Reported-by: NAla Hino <ahino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This trips Coverity, which believes the subsequent qio_channel_create_watch
can dereference a NULL pointer.  In reality, tcp_chr_connect's callers
all have s->ioc properly initialized, since they are all rooted at
tcp_chr_new_client.
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We have confused the number of instructions that have been
executed in the TB with the number of instructions needed
to repeat the I/O instruction.

We have used cpu_restore_state_from_tb, which means that
the guest pc is pointing to the I/O instruction.  The only
time the answer to the later question is not 1 is when
MIPS or SH4 need to re-execute the branch for the delay
slot as well.

We must rely on cpu->cflags_next_tb to generate the next TB,
as otherwise we have a race condition with other guest cpus
within the TB cache.

Fixes: 0790f868Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180319031545.29359-1-richard.henderson@linaro.org>
Tested-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This revert commit fb68096d, and
modify test_read_guest_mem() to use different chardev names, when
using memfd (_test_server_free(), where the chardev is removed, runs
in idle).
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180215212552.26997-4-marcandre.lureau@redhat.com>
Acked-by: NMaxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Before the chardev name fix, the following error may happen: "attempt
to add duplicate property 'chr-test' to object (type 'container')",
due to races.

Sadly, error_vprintf() uses g_test_message(), so you have to use
read the cryptic --debug-log to see it. Later, it would make sense to
use g_critical() instead, and catch errors with
g_test_expect_message() (in glib 2.34).
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180215212552.26997-5-marcandre.lureau@redhat.com>
Acked-by: NMaxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Fixed in a0c167a1 ("x86_iommu: check
if machine has PCI bus").
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1521193892-15552-5-git-send-email-thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The cs4231a, gus and sb16 sound cards crash QEMU when the user tries
to instantiate them on a machine with DMA-less ISA bus (for example
with "qemu-system-mips64el -M mips -device sb16"). Add proper checks
to the realize functions to avoid the crashes.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1521193892-15552-4-git-send-email-thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

A "powernv" machine type defines an ISA bus but it does not add any DMA
controller to it so it is possible to hit assert(fdctrl->dma) by
adding "-machine powernv -device isa-fdc".

This replaces assert() with an error message.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[thuth: Slightly adjusted error message and updated scripts/device-crash-test]
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1521193892-15552-3-git-send-email-thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The CAN devices can currently be used to crash QEMU, e.g.:

$ x86_64-softmmu/qemu-system-x86_64 -device kvaser_pci
Segmentation fault (core dumped)

So we've got to add a proper check here that the corresponding
bus is available.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1521193892-15552-2-git-send-email-thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This removes the additional call to WHvGetVirtualProcessorRegisters in
whpx_vcpu_post_run now that the WHV_VP_EXIT_CONTEXT is returned in all
WHV_RUN_VP_EXIT_CONTEXT structures.
Signed-off-by: NJustin Terry (VM) <juterry@microsoft.com>
Message-Id: <1521039163-138-4-git-send-email-juterry@microsoft.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This fixes a breaking change to WHvSetPartitionProperty to pass the 'in'
PropertyCode on function invocation introduced in Windows Insider SDK 17110.
Usage of this indicates the PropertyCode of the opaque PropertyBuffer passed in
on function invocation.

Also fixes the removal of the PropertyCode parameter from the
WHV_PARTITION_PROPERTY struct as it is now passed to the function directly.
Signed-off-by: NJustin Terry (VM) <juterry@microsoft.com>
Message-Id: <1521039163-138-3-git-send-email-juterry@microsoft.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This fixes a breaking change to WHvGetCapability to include the 'out'
WrittenSizeInBytes introduced in Windows Insider SDK 17110.

This specifies on return the safe length to read into the WHV_CAPABILITY
structure passed to the call.
Signed-off-by: NJustin Terry (VM) <juterry@microsoft.com>
Message-Id: <1521039163-138-2-git-send-email-juterry@microsoft.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If you pass scripts/get_maintainer.pl the name of a FIFO or other
exciting object (/dev/stdin, for example), it would falsely print
"file not found".  Instead: stat the object rather than using -f so
that we do not mind if the object is not a file; and print the errno
value in the error message.
Signed-off-by: NIan Jackson <Ian.Jackson@eu.citrix.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
CC: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <1520535787-6223-13-git-send-email-ian.jackson@eu.citrix.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NIan Jackson <ian.jackson@eu.citrix.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It's unclear what the real maximum is, but we use an uint32_t to store
the log size in vhdx_co_create(), so we should check that the given
value fits in 32 bits.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>

error_setg_errno() is meant for cases where we got an errno from the OS
that can add useful extra information to an error message. It's
pointless if we pass a constant errno, these cases should use plain
error_setg().
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>

Images with a non-power-of-two block size are invalid and cannot be
opened. Reject such block sizes when creating an image.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It's unclear what the real maximum cluster size is for the Parallels
format, but let's at least make sure that we don't get integer
overflows in our .bdrv_co_create implementation.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This tests that the .bdrv_truncate implementation for luks doesn't crash
for invalid image sizes.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Commit e39e959e fixed an invalid assertion in the .bdrv_length
implementation, but left a similar assertion in place for
.bdrv_truncate. Instead of crashing when the user requests a too large
image size, fail gracefully.

A file size of exactly INT64_MAX caused failure before, but is actually
legal.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

We want to test resizing even for luks. The only change that is needed
is to explicitly zero out new space for luks because it's undefined.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Use qemu_uuid_unparse() instead of uuid_unparse() to make vdi.c compile
again when CONFIG_VDI_DEBUG is set. In order to prevent future bitrot,
replace '#ifdef CONFIG_VDI_DEBUG' by 'if (VDI_DEBUG)' so that the
compiler always sees the code.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

What static=on really does is what we call metadata preallocation for
other block drivers. While we can still change the QMP interface, make
it more consistent by using 'preallocation' for VDI, too.

This doesn't implement any new functionality, so the only supported
preallocation modes are 'off' and 'metadata' for now.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>