The ast2400 contains two and the ast2500 contains three watchdogs.
Add this information to the AspeedSoCInfo and realise the correct number
of watchdogs for that each SoC type.
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Tested-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add emulation for Exynos4210 Pseudo Random Number Generator which could
work on fixed seeds or with seeds provided by True Random Number
Generator block inside the SoC.

Implement only the fixed seeds part of it in polling mode (no
interrupts).

Emulation tested with two independent Linux kernel exynos-rng drivers:
1. New kcapi-rng interface (targeting Linux v4.12),
2. Old hwrng inteface
   # echo "exynos" > /sys/class/misc/hw_random/rng_current
   # dd if=/dev/hwrng of=/dev/null bs=1 count=16
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Message-id: 20170425180609.11004-1-krzk@kernel.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
[PMM: wrapped a few overlong lines; more efficient implementation
 of exynos4210_rng_seed_ready()]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Migration pull 2017-07-10

# gpg: Signature made Mon 10 Jul 2017 18:04:57 BST
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20170710a:
  migration: Make compression_threads use save/load_setup/cleanup()
  migration: Convert ram to use new load_setup()/load_cleanup()
  migration: Create load_setup()/cleanup() methods
  migration: Rename cleanup() to save_cleanup()
  migration: Rename save_live_setup() to save_setup()
  doc: update TYPE_MIGRATION documents
  doc: add item for "-M enforce-config-section"
  vl: move global property, migrate init earlier
  migration: fix handling for --only-migratable
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Once there, be consistent and use
compress_thread_{save,load}_{setup,cleanup}.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170628095228.4661-6-quintela@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

Once there, I rename ram_migration_cleanup() to ram_save_cleanup().
Notice that this is the first pass, and I only passed XBZRLE to the
new scheme.  Moved decoded_buf to inside XBZRLE struct.
As a bonus, I don't have to export xbzrle functions from ram.c.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

--

loaded_data pointer was needed because called can change it (dave)
spell loaded correctly in comment (dave)
Message-Id: <20170628095228.4661-5-quintela@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

We need to do things at load time and at cleanup time.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

--

Move the printing of the error message so we can print the device
giving the error.
Add call to postcopy stuff
Message-Id: <20170628095228.4661-4-quintela@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

We need a cleanup for loads, so we rename here to be consistent.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

--

Rename htab_cleanup to htap_save_cleanup as dave suggestion
Message-Id: <20170628095228.4661-3-quintela@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

We are going to use it now for more than save live regions.
Once there rename qemu_savevm_state_begin() to qemu_savevm_state_setup().
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170628095228.4661-2-quintela@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

[Peter collected Eduardo's patch comment and formatted into patch]
Suggested-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1499242883-2184-5-git-send-email-peterx@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

It's never documented, and now we have one more parameter for it (which
obsoletes this one). Document it properly.
Suggested-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1499396048-21657-1-git-send-email-peterx@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
  Removed 'Although now' commit message as per Eduardo's review

Currently drive_init_func() may call migrate_get_current() while the
migrate object is still not ready yet at that time. Move the migration
object init earlier, along with the global properties, right after
acceleration init.

This fixes a breakage for iotest 055, which caused an assertion failure.
Reported-by: NMax Reitz <mreitz@redhat.com>
Reported-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Tested-by: NQingFeng Hao <haoqf@linux.vnet.ibm.com>
Fixes: 3df663 ("migration: move only_migratable to MigrationState")
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1499242883-2184-3-git-send-email-peterx@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

MigrateState object is not ready at that time, so we'll get an
assertion. Use qemu_global_option() instead.
Reported-by: NEduardo Habkost <ehabkost@redhat.com>
Suggested-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Fixes: 3df663e5 ("migration: move only_migratable to MigrationState")
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1499242883-2184-2-git-send-email-peterx@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

nbd patches for 2017-07-10

- Eric Blake: MAINTAINERS: Promote NBD to supported, with new maintainer
- Vladimir Sementsov-Ogievskiy: [00/10] nbd refactoring part 2

# gpg: Signature made Mon 10 Jul 2017 15:59:18 BST
# gpg:                using RSA key 0xA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg:                 aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2017-07-10-v2:
  nbd: use generic trace subsystem instead of TRACE macro
  nbd: refactor tracing
  nbd/server: rename clientflags var in nbd_negotiate_options
  nbd/server: fix TRACE in nbd_negotiate_send_rep_len
  nbd/client: refactor TRACE of NBD_MAGIC
  nbd/common: nbd_tls_handshake: remove extra TRACE
  nbd/server: add errp to nbd_send_reply()
  nbd/server: use errp instead of LOG
  nbd/server: refactor nbd_negotiate
  nbd/server: nbd_negotiate: return 1 on NBD_OPT_ABORT
  MAINTAINERS: Promote NBD to supported, with new maintainer
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Let NBD use the trace mechanisms already present in qemu. Now you can
use the -trace optino of qemu, or the -T/--trace option of qemu-img,
qemu-io, and qemu-nbd, to select nbd traces. For qemu, the QMP commands
trace-event-{get,set}-state can also toggle tracing on the fly.

Example:
   qemu-nbd --trace 'nbd_*' <image file> # enables all nbd traces

Recompilation with CFLAGS=-DDEBUG_NBD is no more needed, furthermore,
DEBUG_NBD macro is removed from the code.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-11-vsementsov@virtuozzo.com>
[eblake: minor tweaks to a couple of traces]
Signed-off-by: NEric Blake <eblake@redhat.com>

Reorganize traces: move, reword, add information, drop extra ones.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-10-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Rename 'clientflags' to just 'option'. This variable has nothing to do
with flags, but is a single integer representing the option requested
by the client.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-9-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Fix wrong order of TRACE arguments.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-8-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

We are going to switch from TRACE macro to trace points,
this TRACE complicates things, this patch simplifies it.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-7-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Error is propagated to the caller, TRACE is not needed.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20170707152918.23086-6-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20170707152918.23086-5-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Move to modern errp scheme from just LOGging errors.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-4-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Combine two successive "if (oldStyle) {...} else {...}" into one.

Block "if (client->tlscreds)" under "if (oldStyle)" is unreachable,
as we have "oldStyle = client->exp != NULL && !client->tlscreds;".
So, delete this block.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-3-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Separate the case when a client sends NBD_OPT_ABORT from all other
errors. It will be needed for the following patch, where errors will be
reported.
This particular case is not actually an error - it honestly follows the
NBD protocol. Therefore it should not be reported like an error.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20170707152918.23086-2-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

We are promising more than just odd fixes, and Paolo is hoping
to offload the pull requests to me.  Also, enough of NBD is related
to the block layer that it is worth including qemu-block on patches.

While at it, include blockdev-nbd.c and qemu-nbd.texi in the set
of maintained files.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <20170707182151.29872-1-eblake@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>

Block layer patches

# gpg: Signature made Mon 10 Jul 2017 12:26:44 BST
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (40 commits)
  block: Make bdrv_is_allocated_above() byte-based
  block: Minimize raw use of bds->total_sectors
  block: Make bdrv_is_allocated() byte-based
  backup: Switch backup_run() to byte-based
  backup: Switch backup_do_cow() to byte-based
  backup: Switch block_backup.h to byte-based
  backup: Switch BackupBlockJob to byte-based
  block: Drop unused bdrv_round_sectors_to_clusters()
  mirror: Switch mirror_iteration() to byte-based
  mirror: Switch mirror_do_read() to byte-based
  mirror: Switch mirror_cow_align() to byte-based
  mirror: Update signature of mirror_clip_sectors()
  mirror: Switch mirror_do_zero_or_discard() to byte-based
  mirror: Switch MirrorBlockJob to byte-based
  commit: Switch commit_run() to byte-based
  commit: Switch commit_populate() to byte-based
  stream: Switch stream_run() to byte-based
  stream: Drop reached_end for stream_complete()
  stream: Switch stream_populate() to byte-based
  trace: Show blockjob actions via bytes, not sectors
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We are gradually moving away from sector-based interfaces, towards
byte-based.  In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.

Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated.  For now,
the io.c layer still assert()s that all callers are sector-aligned,
but that can be relaxed when a later patch implements byte-based
block status.  Therefore, for the most part this patch is just the
addition of scaling at the callers followed by inverse scaling at
bdrv_is_allocated().  But some code, particularly stream_run(),
gets a lot simpler because it no longer has to mess with sectors.
Leave comments where we can further simplify by switching to
byte-based iterations, once later patches eliminate the need for
sector-aligned operations.

For ease of review, bdrv_is_allocated() was tackled separately.
Signed-off-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

bdrv_is_allocated_above() was relying on intermediate->total_sectors,
which is a field that can have stale contents depending on the value
of intermediate->has_variable_length.  An audit shows that we are safe
(we were first calling through bdrv_co_get_block_status() which in
turn calls bdrv_nb_sectors() and therefore just refreshed the current
length), but it's nicer to favor our accessor functions to avoid having
to repeat such an audit, even if it means refresh_total_sectors() is
called more frequently.
Suggested-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NManos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We are gradually moving away from sector-based interfaces, towards
byte-based.  In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.

Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated.  For now,
the io.c layer still assert()s that all callers are sector-aligned
on input and that *pnum is sector-aligned on return to the caller,
but that can be relaxed when a later patch implements byte-based
block status.  Therefore, this code adds usages like
DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned
values, where the call might reasonbly give non-aligned results
in the future; on the other hand, no rounding is needed for callers
that should just continue to work with byte alignment.

For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_is_allocated().  But
some code, particularly bdrv_commit(), gets a lot simpler because it
no longer has to mess with sectors; also, it is now possible to pass
NULL if the caller does not care how much of the image is allocated
beyond the initial offset.  Leave comments where we can further
simplify once a later patch eliminates the need for sector-aligned
requests through bdrv_is_allocated().

For ease of review, bdrv_is_allocated_above() will be tackled
separately.
Signed-off-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based.  Change the internal
loop iteration of backups to track by bytes instead of sectors
(although we are still guaranteed that we iterate by steps that
are cluster-aligned).
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based.  Convert another internal
function (no semantic change).
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based.  Continue by converting
the public interface to backup jobs (no semantic change), including
a change to CowRequest to track by bytes instead of cluster indices.

Note that this does not change the difference between the public
interface (starting point, and size of the subsequent range) and
the internal interface (starting and end points).
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NXie Changlong <xiechanglong@cmss.chinamobile.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based.  Continue by converting an
internal structure (no semantic change), and all references to
tracking progress.  Drop a redundant local variable bytes_per_cluster.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Now that the last user [mirror_iteration()] has converted to using
bytes, we no longer need a function to round sectors to clusters.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based.  Change the internal
loop iteration of mirroring to track by bytes instead of sectors
(although we are still guaranteed that we iterate by steps that
are both sector-aligned and multiples of the granularity).  Drop
the now-unused mirror_clip_sectors().
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based.  Convert another internal
function, preserving all existing semantics, and adding one more
assertion that things are still sector-aligned (so that conversions
to sectors in mirror_read_complete don't need to round).
Signed-off-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based.  Convert another internal
function (no semantic change), and add mirror_clip_bytes() as a
counterpart to mirror_clip_sectors().  Some of the conversion is
a bit tricky, requiring temporaries to convert between units; it
will be cleared up in a following patch.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Rather than having a void function that modifies its input
in-place as the output, change the signature to reduce a layer
of indirection and return the result.
Suggested-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based.  Convert another internal
function (no semantic change).
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based.  Continue by converting an
internal structure (no semantic change), and all references to the
buffer size.

Add an assertion that our use of s->granularity >> BDRV_SECTOR_BITS
(necessary for interaction with sector-based dirty bitmaps, until
a later patch converts those to be byte-based) does not suffer from
truncation problems.

[checkpatch has a false positive on use of MIN() in this patch]
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based.  Change the internal
loop iteration of committing to track by bytes instead of sectors
(although we are still guaranteed that we iterate by steps that
are sector-aligned).
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>