There were some preexisting bits that released the input when switching
to text console. This patch spreads this logic consistently and also
avoids grabbing the input while a text console is active.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This ensures that we actually enter full screen on startup when e.g.
'-vga none -full-screen' was specified.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

There must be no difference between initial -full-screen and switching
to this mode via the hot key.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Save the scaling mode and its geometry when going full screen, restore
it when returning to windowed mode.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When switching to full screen mode from a scaled window, we need to
resize to DisplayState's dimension, not the scaled "real" screen size.
Moreover, scaling mode may have manipulated the bpp. So we need to
restore it from the DisplayState as well.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Prevents screen flickering.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This prevents continuous resizing events and improper screen setups when
going full screen.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Just like the monitor does, we need to clear no_shutdown before calling
qemu_system_shutdown_request on quit requests. Otherwise, QEMU just
stops the VM.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When compiling with gcc 4.6, some code in fw_cfg.c complains that fop_ret
is assigned but not used (which is true).  However, it looks like the
meaningless assignments to fop_ret were done to suppress other gcc warnings
due to the fact that fread() is labelled as warn_unused_result in glibc.

This patch avoids both errors, by actually checking the fread() result code
and dropping out with an error message if it fails.
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tested-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When loading an internal snapshot whose L1 table is smaller than the current L1
table, the size of the current L1 would be shrunk to the snapshot's L1 size in
memory, but not on disk. This lead to incorrect refcount updates and eventuelly
to image corruption.

Instead of writing the new L1 size to disk, this simply retains the bigger L1
size that is currently in use and makes sure that the unused part is zeroed.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Tested-by: NPhilipp Hahn <hahn@univention.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

QAPI will require glib/python, but for now the guest agent is the only
user. For now, make these dependencies an explicit guest agent one, and
give users the option to disable it if need be.

Once QAPI is adopted in core QEMU code, we would basically revert this
patch.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NBrad Smith <brad@comstyle.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The system emulation code was not merged before the branch.
Let's leave that work for the next release.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

With vhost_net="" (most non-Linux hosts), configure prints an
error message:

test: 2551: =: unexpected operator

Fix this and similar code by adding the missing "".

Cc: Wolfgang Mauerer <wolfgang.mauerer@siemens.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Migrating after unplugging a virtio-balloon device resulted in an error
message on the destination:

Unknown savevm section or instance '0000:00:04.0/virtio-balloon' 0
load of migration failed

Fix this by unregistering the section on device unplug.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>

Add an exit handler that will free up RAM after a virtio-balloon device
is unplugged.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>

Negative balloon values don't make sense, reject them and throw a qerror
with QERR_INVALID_PARAMETER_VALUE.
Reported-by: NMike Cao <bcao@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>

Multiple balloon registrations are not allowed; check if the
registration with the qemu balloon api succeeded.  If not, fail the
device init.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>

Multiple balloon devices don't make sense; disallow more than one
registration attempt to register handlers.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NAmit Shah <amit.shah@redhat.com>

Signed-off-by: NAmit Shah <amit.shah@redhat.com>

Passing on '0' as ballooning target to indicate retrieval of stats is
bad API.  It also makes 'balloon 0' in the monitor cause a segfault.
Have two different functions handle the different functionality instead.

Detailed explanation from Markus's review:

1. do_info_balloon() is an info_async() method.  It receives a callback
   with argument, to be called exactly once (callback frees the
   argument).  It passes the callback via qemu_balloon_status() and
   indirectly through qemu_balloon_event to virtio_balloon_to_target().

   virtio_balloon_to_target() executes its balloon stats half.  It
   stores the callback in the device state.

   If it can't send a stats request, it resets stats and calls the
   callback right away.

   Else, it sends a stats request.  The device model runs the callback
   when it receives the answer.

   Works.

2. do_balloon() is a cmd_async() method.  It receives a callback with
   argument, to be called when the command completes.  do_balloon()
   calls it right before it succeeds.  Odd, but should work.

   Nevertheless, it passes the callback on via qemu_ballon() and
   indirectly through qemu_balloon_event to virtio_balloon_to_target().

   a. If the argument is non-zero, virtio_balloon_to_target() executes
      its balloon half, which doesn't use the callback in any way.

      Odd, but works.

   b. If the argument is zero, virtio_balloon_to_target() executes its
      balloon stats half, just like in 1.  It either calls the callback
      right away, or arranges for it to be called later.

      Thus, the callback runs twice: use after free and double free.

Test case: start with -S -device virtio-balloon, execute "balloon 0" in
human monitor.  Runs the callback first from virtio_balloon_to_target(),
then again from do_balloon().
Reported-by: NMike Cao <bcao@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Separate out the code to retrieve balloon info from the code that sets
balloon values.

This will be used to separate the two callbacks from balloon.c and help
cope with 'balloon 0' on the monitor.  Currently, 'balloon 0' causes a
segfault in monitor_resume().
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Replace:
  if (foo) {
    ...
  } else {
    return 0;
  }

by

  if (!foo) {
    return 0;
  }
  ...
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

balloon.h had function declarations for a couple of functions that are
local to balloon.c.  Make them static.

Drop the 'qemu_' prefix for balloon.c-local variables, and make them
static.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Almost pure code motion.  Unstatic hid interface functions and add
them to the header file.  Some renames.  Some code style cleanups.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add hid_has_events function, use it to figure whenever there are pending
events instead of checking and updating USBHIDState->changed.

Setting ->changed to 1 on init is removed, that should have absolutely
no effect as the initial state of ->idle is 0 so we report hid state
anyway until the guest configures some idle time.  Also should clear
->idle on reset.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add callback for event notification, which allows to un-usbify more
functions.  Also split separate hid_* functions for reset and release.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>