Discussion can be found at:
http://patchwork.ozlabs.org/patch/128730/

This patch add image fragmentation statistics while using qemu-img check.
Signed-off-by: NDong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

I am not sure that these are really proper GtkDoc, but they follow
the existing documentation in block_int.h.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There is no need to do this in every implementation of set_speed
(even though there is only one right now).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Streaming can issue I/O while qcow2_close is running.  This causes the
L2 caches to become very confused or, alternatively, could cause a
segfault when the streaming coroutine is reentered after closing its
block device.  The fix is to cancel streaming jobs when closing their
underlying device.

The cancellation must be synchronous, on the other hand qemu_aio_wait
will not restart a coroutine that is sleeping in co_sleep.  So add
a flag saying whether streaming has in-flight I/O.  If the busy flag
is false, the coroutine is quiescent and, when cancelled, will not
issue any new I/O.

This protects streaming against closing, but not against deleting.
We have a reference count protecting us against concurrent deletion,
but I still added an assertion to ensure nothing bad happens.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We do not want jobs to keep a device busy for a possibly very long
time, and management could become confused because they thought a
device was not even there anymore.  So, cancel long-running jobs
as soon as their device is going to disappear.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently dma_bdrv_io() takes a 'to_dev' boolean parameter to
determine the direction of DMA it is emulating.  We already have a
DMADirection enum designed specifically to encode DMA directions.
This patch uses it for dma_bdrv_io() as well.  This involves removing
the DMADirection definition from the #ifdef it was inside, but since that
only existed to protect the definition of dma_addr_t from places where
config.h is not included, there wasn't any reason for it to be there in
the first place.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Finally reindent all code and change goto statements to a loop.
Acked-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Reads and writes to the underlying file can also occur with the simple
non-vectored I/O interfaces.
Acked-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

vdi.c really works as if it implemented bdrv_read and bdrv_write.  However,
because only vector I/O is supported by the asynchronous callbacks, it
went through extra pain to bounce-buffer the I/O.  This can be handled
by the block layer now that the format is coroutine-based.
Acked-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Most of the AIOCB really holds local variables that need to persist
across callback invocation.  It can go away now.
Acked-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Now inline the former AIO callbacks into vdi_co_readv and vdi_co_writev.
While many cleanups are possible, the code now really looks synchronous.
Acked-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The next step is to take code that only triggers after the first operation,
and move it at the end of vdi_aio_read_cb and vdi_aio_write_cb.
Acked-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Even a basic conversion changing the bdrv_aio_readv/bdrv_aio_writev calls
to bdrv_co_readv/bdrv_co_writev, and callbacks to goto statements can
eliminate a lot of code.  This is because error handling is simplified
and indirections through bottom halves can go away.

After this patch, I/O to the underlying file already happens via
coroutines, but the code still looks a lot like if asynchronous I/O was
being used.
Acked-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Nicolae Mogoreanu <mogo@google.com> noticed that I/O requests can lead
to QEMU crashes when the logical_block_size property is smaller than 512
bytes.

Using the new "blocksize" property we can properly enforce constraints
on the block size such that QEMU's block layer is able to operate
correctly.
Reported-by: NNicolae Mogoreanu <mogo@google.com>
Reported-by: NMichael Halcrow <mhalcrow@google.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Storage interfaces like virtio-blk can be configured with block size
information so that the guest can take advantage of efficient I/O
request sizes.

According to the SCSI Block Commands (SBC) standard a device's block
size is "almost always greater than one byte and may be a multiple of
512 bytes".  QEMU currently has a 512 byte minimum block size because
the block layer functions work at that granularity.  Furthermore, the
block size should be a power of 2 because QEMU calculates bitmasks from
the value.

Introduce a "blocksize" property type so devices can enforce these
constraints on block size values.  If the constraints are relaxed in the
future then this property can be updated.

Introduce the new PropertyValueNotPowerOf2 QError so QMP clients know
exactly why a block size value was rejected.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Fix a typo in the description for QERR_PROPERTY_VALUE_OUT_OF_RANGE where
"'" was used instead of ")".
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

After validation check, the 'checksum' is not written back
to footer, which leave it with zero.

This results in errors while loadding it under Microsoft's
Hyper-V environment, and also errors from utilities like
Citrix's vhd-util.
Signed-off-by: NZhang Shengju <sean_zhang@trendmicro.com.cn>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Allow the user to specify a disk's World Wide Name.

Linux guests can address disks by their unique World Wide Name number
(e.g. /dev/disk/by-id/wwn-0x5001517959123522). This patch adds support
for assigning a World Wide Name number to a virtual IDE disk.

Cc: kwolf@redhat.com
Signed-off-by: NFloris Bos <dev@noc-ps.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

strncpy may not null-terminate the destination string.

Cc: kwolf@redhat.com
Signed-off-by: NFloris Bos <dev@noc-ps.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Allow the user to override the default disk model name "QEMU HARDDISK".

Some Linux distributions use the /dev/disk/by-id/scsi-SATA_name-of-disk-
model_serial addressing scheme when refering to partitions in /etc/fstab
and elsewhere. This causes problems when starting a disk image taken from
an existing physical server under qemu, because when running under qemu
name-of-disk-model is always "QEMU HARDDISK".

This patch introduces a model=s option which in combination with the
existing serial=s option can be used to fake the disk the operating
system was previously on, allowing the OS to boot properly.

Cc: kwolf@redhat.com
Signed-off-by: NFloris Bos <dev@noc-ps.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Reserved bits should be cleared to zero.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

And remove several block_int.h inclusions that should not be there.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It can be useful to enable QEMU tracing when trying out block layer
interfaces via qemu-io.  Tracing can be enabled using the new -T FILE
option where the given file contains a list of trace events to enable
(just like the qemu --trace events=FILE option).

  $ echo qemu_vfree >my-events
  $ ./qemu-io -T my-events ...

Remember to use ./configure --enable-trace-backend=BACKEND when building
qemu-io.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Since everything goes through the cache, callers don't use the L2 table
offset any more.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

It has happened more than once that patches that look perfectly sane
and work with simpletrace broke systemtap because they use 'next' as an
argument name for a tracing function. However, 'next' is a keyword for
systemtap, so we shouldn't use it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

'next' is a systemtap keyword, so it's a bad idea to use it as an
argument name.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

* 's390-for-upstream' of git://repo.or.cz/qemu/agraf:
  target-s390x: Update s390x_{tod,cpu}_timer() to use S390CPU
  target-s390x: QOM'ify CPU init
  target-s390x: QOM'ify CPU reset
  target-s390x: QOM'ify CPU

The vector interrupt has higher priority than interrupt_level_n.
Also check only interrupt_level_n concurency when TL > 0, the traps of
other types may be nested.
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Don't produce stray irq 5, don't overwrite ivec_data if still busy with
processing of the previous interrupt.
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

In place of CPUS390XState pass S390CPU as opaque from the new initfn.
cpu_interrupt() is anticipated to take a CPUState in the future.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Move code from cpu_s390x_init() into an initfn.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Move code from cpu_state_reset() to s390_cpu_reset().
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Embed CPUS390XState as first member of S390CPU.
Since -cpu is being ignored, make TYPE_S390_CPU non-abstract.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Avoid cluttering too much the QOM root.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

A strong limitation of QOM right now is that unconverted ports
(e.g. all...) do not give a canonical path to devices that are
part of the board.  This in turn makes it impossible to replace
PROP_PTR with a QOM link for example.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We want the composition tree to to be in order by the time we call
qdev_init, so that a single set of the toplevel realize property can
propagate all the way down the composition tree.

This is not the case so far.  Unfortunately, this is incompatible
with calling qdev_init in the constructor wrappers for devices,
so for now we need to unattach some devices that are created through
those wrappers.  This will be fixed by removing qdev_init and instead
setting the toplevel realize property after machine init.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is QOM "mkdir -p".  It is useful when referring to
container objects such as "/machine".
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* kiszka/queues/slirp:
  slirp: Signal free input buffer space to io-thread
  w32/slirp: Undefine error constants before their redefinition
  slirp: use socket_set_nonblock
  slirp: clean up conflicts with system headers