- 14 1月, 2010 5 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
The variable is_annulled is referenced in a FIXME comment, so instead of removing the variable, comment out the lines so that the FIXME can be understood. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 13 1月, 2010 18 次提交
-
-
由 Stefan Weil 提交于
pci_get_byte, pci_get_word, pci_get_long and pci_get_quad all take a const uint8_t pointer, because they only read the configuration data. Their prototypes should reflect this fact. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Stefan Weil 提交于
Use new way to associate ROM files to devices. Currently, there is only a ROM file for i82559er included in QEMU, so the patch does not add .romfile for the other devices. When flexible mode is fixed in eepro100, adding more ROM files will be possible. It should be possible to create them from pxe-i82559er.bin, because etherboot uses the same driver for all eepro100 devices (only PCI ids differ). Maybe it is even possible to create a single pxe-i8255x.bin which supports all eepro100 devices (not supported with current etherboot). Signed-off-by: NStefan Weil <weil@mail.berlios.de> Acked-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Stefan Weil 提交于
The numerical value was wrong (0x2800 instead of 0x0280) which indeed did not make sense. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Juergen Lock 提交于
Turns out on those versions of FreeBSD (>= 7.x) that know OSS_GETVERSION the ioctl doesn't actually work yet (except in the Linuxolator), so if building on FreeBSD assume the sound drivers are new enough if the ioctl returns the errno it does currently on FreeBSD. (Rev 2 after private discussion with malc.) Signed-off-by: NJuergen Lock <nox@jelal.kn-bremen.de> Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Michael S. Tsirkin 提交于
Mac feature bit isn't going to work as all network cards already have a 'mac' property to set the mac address. Remove it from mask and add in get_features. Reported-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Will be required for upcoming KVM cpuid leaf. Host kernels >= 2.6.32 as well as future kvm-kmod releases (more recent than kvm-kmod-2.6.32.3) do/will provide them. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Since kvm-kmod-2.6.32.2 we have an alternative source for recent KVM kernel headers. Use it when available and not overruled by --kerneldir. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Blue Swirl 提交于
Value stored to 'nb_per_line' is never read. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Fix by Igor Kovalenko. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Richard Henderson 提交于
The 32-bit right-shift instructions is defined to extend the shifted output to 64-bits. A shift count of zero therefore is a simple extension without actually shifting. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Richard Henderson 提交于
The {div,divu}2 opcodes are intended for systems for which the division instruction produces both quotient and remainder. Sparc is not such a system. Indeed, the remainder must be computed as quot = a / b rem = a - (quot * b) Split out a tcg_out_div32 function that properly initializes Y with the extension of the input to 64-bits. Discard the code that used the 64-bit DIVX on sparc9/sparcv8plus without extending the inputs to 64-bits. Implement remainders in terms of division followed by multiplication. Signed-off-by: NRichard Henderson <rth@twiddle.net> [blauwirbel@gmail.com: applied rth's typo fix in tcg_out_div32] Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Richard Henderson 提交于
Only 'L' constraint needs that. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Richard Henderson 提交于
Add missing 32-bit double-word support opcodes. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Richard Henderson 提交于
Add a function to handle the register-vs-immediate test for arithmetic. Also, adjust the OP_32_64 macro so that it auto-indents properly. Rename the gen_arith32 label to gen_arith, since it handles 64-bit arithmetic as well. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefano Stabellini 提交于
Hi all, calling vnc_update_client in vnc_refresh might have the unlikely side effect of setting vd->timer = NULL, if the last vnc client disconnected. In this case we have to return from vnc_refresh without updating the timer, otherwise we cause a segfault. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
Without this fix, guest crashes with drive=virtio. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
The monitor_protocol_event() function will free the event's data, this is wrong as 'data' management is up to the caller. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 malc 提交于
Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 12 1月, 2010 16 次提交
-
-
由 Blue Swirl 提交于
Leave the bogus access method used by OpenBIOS in place for now. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Anthony Liguori 提交于
5da6833 Update version to 0.5.1 669c991 Fix sign error preventing incorrect memory over 4gig calculation. 7e6bd3e Minor - better indent assembler in int1587. 48cf232 Add comment explaining why mptable is in low memory. 643062f Add int1589 support. 085debd Set FDPT in irq table even for small drives. 7c1b186 Reduce #ifs by weeding out some cross-chunk function definitions. f9b25d3 Fix vgahook sign issue; add warning to build to catch future cases. 3862b2d vgabios: Fix compile error due to fixed prototypes. 1ca05b0 Be sure to add "void" to all function prototypes that take no args. b5bb9db mptable: Reset pinmask on new bus or device. 8918989 Detect latest FC12 gcc -combine breakage. c9d3c2d Minor vga binary cleanups. 9a8609f Make MTRR region 0xc0000-0x100000 be cached. fdca418 Force a link error if a function is used from the wrong code chunk. dad41d9 Add __noreturn define for __attribute__((noreturn)). c003148 Implement native 32bit APM support. 5c99b6c Commit compiled dsdt file; misc comment updates. 29f4b91 prevent acpi from rerouting SCI interrupt 4c94b7e enumerate all PCI buses in mptable 871e0a0 Add support for 32bit PCI BIOS entry. eda2c83 Only add "addr32" to memory accesses that require them. 52a300f Introduce MODESEGMENT define; rename VISIBLE32 to VISIBLE32FLAT. fe2c3ee Allocate smbios in temp space and copy into final location. b164d2c Clear user reserved interrupts (0x60-0x66). d9104ff Remove pci_bios_bigmem_addr; set pci_bios_mem_addr=0xe0000000 14021f2 Add initial support for ATA DMA. 8362699 Allocate mptable in temp space and copy into final location. 979862e Also report memory over 4G during init. 928d4df provide correct pci routing information in mptable afc02da Add symbolic definitions for MTRR code. fb214dc Fix yield() so it works from boot code. 2ceeec9 Fix potential build failure due to text16 section being too large. a2195e4 Increase version in preparation for next release. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Bruce Rogers 提交于
Signed-off-by: NBruce Rogers <brogers@novell.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
So '-M pc-0.10' and '-M pc-0.11' will use the fw_cfg rom load method by default. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch adds a pci bus property 'rombar' which specifies whenever the pci rom should be loaded via pci rom bar (default) or via fw_cfg. The later can be used for compatibility with older qemu versions where no pci rom bar is present. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch changes the way rom loading via fw_cfg is handled. Instead of having pc_init1() call a function which passed all roms to the firmware config we simply pass a pointer to fw_cfg to the rom loader. Advantage: loading roms via firmware works also for devices which are initialized after pc_init1(), i.e. everyting added via -device. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Changes: - make dir argument mandatory, we allways have one anyway (vgaroms or genroms). - check for duplicates, skip loading if found. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Changes: - Drop extra file argument from rom_add_file(). - Drop fw_dir check in do_info_roms, we allways have a dir name. - code style fixes. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Add a new machine type for qemu 0.12. Also fixup the 0.11 machine type: msi for virtio-blk-pci was enabled after the 0.11 release, so turn it off in the 0.11 machine type. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Thomas Horsten 提交于
If a PXE client only wants to find out the size of a file, it will open the file and then abort the transfer by sending a TFTP ERROR packet. The ERROR packet should cause qemu to terminate the session. If not, the sessions will soon run out and cause timeouts in the client. Also, if a TFTP session already exists with same IP/UDP port, it should be terminated when a new RRQ is received, instead of creating a duplicate (which will never be used). A patch for gPXE to send the ERROR packet is also being submitted to gPXE. Together they resolve slowness/hanging when booting pxegrub from qemu's internal TFTP server. The patch from Milan Plzik to return after sending OACK is also required for a complete fix. Signed-off-by: NThomas Horsten <thomas@horsten.com> Signed-off-by: NMilan Plzik <milan.plzik@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Christoph Hellwig 提交于
Currently the dmg image format driver simply opens the images as raw if any kind of failure happens. This is contrarty to the behaviour of all other image formats which just return an error and let the block core deal with it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
Since patch ed757e14t, virtio will sometimes clear all status registers on bus master disable, which loses information such as VIRTIO_CONFIG_S_FAILED bit. This is a result of a patch being misapplied: code uses ! instead of ~ for bit operations as in Yan's original patch. This obviously does not make sense. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
Add feature bits as properties to virtio. This makes it possible to e.g. define machine without indirect buffer support, which is required for 0.10 compatibility, or without hardware checksum support, which is required for 0.11 compatibility. Since default values for optional features are now set by qdev, get_features callback has been modified: it sets non-optional bits, and clears bits not supported by host. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
Rename features->guest_features. This is what they are, avoid confusion with host features which we also need to keep around. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
This adds "bit" property type, which is a boolean stored in a 32 bit integer field, with legal values on and off. Will be used by virtio for feature bits. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
The PC BIOS no longer comes from Bochs. This patch updates the related entry. V2 - Modify SeaBIOS description and URL (Thanks to Gleb Natapov for the hint). Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 1月, 2010 1 次提交
-
-
由 Gerd Hoffmann 提交于
All callers of lsi_reselect have a lsi_request struct at hand anyway. So just pass it directly instead of having lsi_reselect search for it using the tag. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-