Since e02bc6de, add_watch() is called
with G_IO_HUP. Even if spice-qemu-char ignores this flag, the
precondition must be changed.

https://bugzilla.redhat.com/show_bug.cgi?id=1128992Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Skip mm_time updates (in qxl device memory) in case the guest is stopped.
Guest isn't able to look anyway, and it causes problems with migration.

Also make sure the initial state for spice server is stopped.
Reported-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The spice server is polling on write, unless
SPICE_CHAR_DEVICE_NOTIFY_WRITABLE flag is set. In this case, qemu must
call spice_server_char_device_wakeup() when the frontend is writable.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

When the virtio serial is writable, notify the chardev backend
with qemu_chr_accept_input().
Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The requirements described in this patch are implemented by "Add GDB
qAttached support".

This reverts commit 00e94dbc.
Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

With this patch QEMU handles qAttached request from gdb. When QEMU
replies 1, GDB sends a "detach" command at the end of a debugging
session otherwise GDB sends "kill".

The default value for qAttached is 1 on system emulation and 0 on user
emulation.

Based on original version by Fabien Chouteau.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This helper supports parsing of query packets with optional extensions.
The separator can be specified so that we can use it already for both
qqemu.sstep[=] and qSupported[:feature].
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

qOffsets has no additional optional parameters. So match the complete
string to avoid stumbling over possible future commands with identical
prefix.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

A set of patches add support for vector registers on s390x.
Notable: Floating point registers and vector registers overlap,
so extra care is needed so that we end up with a consistent state
in all cases.

# gpg: Signature made Thu May 28 09:37:27 2015 BST using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"

* remotes/cohuck/tags/s390x-20150528:
  s390x: Enable vector processing capability
  s390x: Migrate vector registers
  s390x: Add vector registers to ELF dump
  linux/elf.h update
  s390x: Add vector registers to HMP output
  s390x: gdb updates for vector registers
  gdb-xml: Include XML for s390 vector registers
  s390x: Store Additional Status SIGP order
  s390x: Vector Register IOCTLs
  s390x: Common access to floating point registers
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Wed May 27 11:02:55 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/net-pull-request:
  net/net: Record usage status of mac address
  tap: Improve -netdev/netdev_add/-net/... tap error reporting
  tap: Finish conversion of tap_open() to Error
  tap-solaris: Convert tap_open() to Error
  tap-bsd: Convert tap_open() to Error
  tap-linux: Convert tap_open() to Error
  tap: Permit incremental conversion of tap_open() to Error
  tap: Convert launch_script() to Error
  tap: Convert net_init_tap_one() to Error
  tap: Convert tap_set_sndbuf() to Error
  tap: Improve -netdev/netdev_add/-net/... bridge error reporting
  tap: net_tap_fd_init() can't fail, drop dead error handling
  net/dump: Improve -net/host_net_add dump error reporting
  net: Improve -net nic error reporting
  net: Permit incremental conversion of init functions to Error
  net: Improve error message for -net hubport a bit
  net: Change help text to list -netdev instead of -net by default
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Everything is finally in place, inform the kernel that user space
supports vector registers.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

When migrating a guest, be sure to include the vector registers.
The vector registers are defined in a subsection, similar to the
existing subsection for floating point registers.  Since the
floating point registers are always present (and thus migrated),
we can skip them when performing the migration of the vector
registers which may or may not be present.
Suggested-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Create ELF notes for the vector registers where applicable, so that
their contents can be examined by utilities such as crash or readelf.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Sync with kernel elf.h updates to get s390x vector register definitions.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

There are mechanisms to dump registers via the qemu HMP interface,
such as the "info registers" command.  Expand this output to dump
the new vector registers.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

gdb allows registers to be displayed/modified, and is being updated
to account for the new vector registers.  Mirror these changes in
the gdb stub in qemu so that this can be performed when gdb is
attached to the qemu gdbserver.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Include the vector registers XML file that is provided by gdb,
and can be used by the qemu gdbserver interface.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Add handling for the Store Additional Status at Address order
that exists for the Signal Processor (SIGP) instruction.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Handle the actual syncing of the vector registers with kernel space,
via the get/put register IOCTLs.

The vector registers that were introduced with the z13 overlay
the existing floating point registers.  FP registers 0-15 are
the high-halves of vector registers 0-15.  Thus, remove the
freg fields and replace them with the equivalent vector field
to avoid errors in duplication.  Moreover, synchronize either the
vector registers via kvm_sync_regs, or floating point registers
via the GET/SET FPU IOCTLs.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Provide a routine to access the correct floating point register,
to simplify future expansion.
Suggested-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Currently QEMU dynamically generates mac address for the NIC which
doesn't specify the mac address. But when we hotplug a NIC without
specifying mac address, the mac address will increase for the same NIC
along with hotplug and hot-unplug, and at last it will overflow. And if
we codeplug one NIC with mac address e.g. "52:54:00:12:34:56", then
hotplug one NIC without specifying mac address and the mac address of
the hotplugged NIC is duplicate of "52:54:00:12:34:56".

This patch add a mac_table to record the usage status and free the mac
address when the NIC is unrealized.
Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

When -netdev tap fails, it first reports a specific error, then a
generic one, like this:

    $ qemu-system-x86_64 -netdev tap,id=foo
    qemu-system-x86_64: -netdev tap,id=foo: could not configure /dev/net/tun: Operation not permitted
    qemu-system-x86_64: -netdev tap,id=foo: Device 'tap' could not be initialized

With the command line, the messages go to stderr.  In HMP, they go to
the monitor.  In QMP, the second one becomes the error reply, and the
first one goes to stderr.

Convert net_init_tap() to Error.  This suppresses the unwanted second
message, and makes the specific error the QMP error reply.

[Dropped duplicate "and" from error message as suggested by Eric Blake:
"ifname=, script=, downscript=, and vnet_hdr=, "
"queues=, and vhostfds= are invalid with helper="
--Stefan]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-16-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-15-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Fixes inappropriate use of syslog().

Not fixed: leaks on error paths, suspicious non-fatal errors.  FIXMEs
added instead.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-14-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Fixes inappropriate use of stderr in monitor command handler.

While there, improve some of the messages a bit.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-13-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-12-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Convert the trivial ones immediately: tap-aix and tap-haiku.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-11-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Fixes inappropriate use of stderr in monitor command handler.

While there, improve the messages some.

[Fixed Error **err -> Error *err local variable that broke the build.
--Stefan]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-10-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

[Dropped %s from "tap: open vhost char device failed: %s" since
error_setg_errno() already prints a human-readable error string and
there is no format string argument.
--Stefan]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-9-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-8-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

When -netdev bridge fails, it first reports a specific error, then a
generic one, like this:

    $ qemu-system-x86_64 -netdev bridge,id=foo
    failed to launch bridge helper
    qemu-system-x86_64: -netdev bridge,id=foo: Device 'bridge' could not be initialized

The first message goes to stderr.  Wrong for HMP, because errors need
to go to the monitor there.

The second message goes to stderr for -netdev, to the monitor for HMP
netdev_add, and becomes the error reply for QMP netdev_add.

Convert net_bridge_run_helper() to Error, and propagate its errors
through net_init_bridge().  This ensures the error gets reported where
the user is, and suppresses the unwanted second message.

While there, improve the error messages a bit.

The above example becomes:

    $ qemu-system-x86_64 -netdev bridge,id=foo
    qemu-system-x86_64: -netdev bridge,id=foo: bridge helper failed

net_init_tap() also uses net_bridge_run_helper().  Propagate its
errors there as well.  Improves reporting these errors with -netdev
tap & friends.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-7-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-6-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

When -net dump fails, it first reports a specific error, then a
generic one, like this:

    $ qemu-system-x86_64 -net dump,id=foo,file=/eperm
    qemu-system-x86_64: -net dump,id=foo,file=/eperm: -net dump: can't open /eperm
    qemu-system-x86_64: -net dump,id=foo,file=/eperm: Device 'dump' could not be initialized

Convert net_init_tap() to Error.  This suppresses the unwanted second
message.

Improve the error messages to include strerror(errno) where
appropriate.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-5-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

When -net nic fails, it first reports a specific error, then a generic
one, like this:

    $ qemu-system-x86_64 -net nic,netdev=nonexistent
    qemu-system-x86_64: -net nic,netdev=nonexistent: netdev 'nonexistent' not found
    qemu-system-x86_64: -net nic,netdev=nonexistent: Device 'nic' could not be initialized

Convert net_init_nic() to Error to get rid of the unwanted second
error message.

While there, tidy up an Overcapitalized Error Message.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-4-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Error reporting for netdev_add is broken: the net_client_init_fun[]
report the actual errors with (at best) error_report(), and their
caller net_client_init1() makes up a generic error on top.

For command line and HMP, this produces an mildly ugly error cascade.

In QMP, the actual errors go to stderr, and the generic error becomes
the command's error reply.

To fix this, we need to convert the net_client_init_fun[] to Error.

To permit fixing them one by one, add an Error ** parameter to the
net_client_init_fun[].  If the call fails without returning an Error,
make up the same generic Error as before.  But if it returns one, use
that instead.  Since none of them does so far, no functional change.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-3-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Type "hubport" is valid only with -netdev.  Unfortunately, that's
detected late and the error message doesn't explain why:

    $ qemu-system-i386 -net hubport,id=foo,hubid=0
    qemu-system-i386: -net hubport,id=foo,hubid=0: Device 'hubport' could not be initialized

Improve the error message to "Parameter 'type' expects a net type".

Not fixed: -net hubport without the parameters required by -netdev
hubport still asks for those parameters:

    $ qemu-system-i386 -net hubport
    qemu-system-i386: -net hubport: Parameter 'hubid' is missing
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-2-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Looking at the output of "qemu-system-xxx -help", you easily get
the impression that "-net" is the preferred way instead of "-netdev"
to specify host network interface, since the "-net" option is
omnipresent but the "-netdev" option is only listed as a one-liner
at the end. This is ugly since "-net" is considered as legacy and
even might be removed one day. Thus, this patch switches the output
to explain the host network interfaces with the "-netdev" option
instead, moving the old "-net" option into some few lines at
the end.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-id: 1431701904-12230-1-git-send-email-thuth@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

# gpg: Signature made Fri May 22 20:58:44 2015 BST using RSA key ID AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/ide-pull-request:
  ahci: do not remap clb/fis unconditionally
  macio: move unaligned DMA write code into separate pmac_dma_write() function
  macio: move unaligned DMA read code into separate pmac_dma_read() function
  qtest: pre-buffer hex nibs
  libqos/ahci: Swap memread/write with bufread/write
  qtest: add memset to qtest protocol
  qtest: Add base64 encoded read/write
  qtest: allow arbitrarily long sends
  qtest/ahci: add migrate halted dma test
  qtest/ahci: add halted dma test
  qtest/ahci: add flush migrate test
  qtest/ahci: add migrate dma test
  qtest/ahci: Add migration test
  ich9/ahci: Enable Migration
  libqos: Add migration helpers
  libqos/ahci: Fix sector set method
  libqos/ahci: Add halted command helpers
  glib: remove stale compat functions
  configure: require glib 2.22
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This continues the IOMMU fix from 2.3, where we should not attempt
to remap the CLB or FIS RX buffers if the AHCI device is currently
running.

The same applies to migration: keep our mitts off these registers
unless the device is supposed to be on.

Does not impact backwards compatibility for the AHCI device.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1431470173-30847-2-git-send-email-jsnow@redhat.com

Similarly switch the macio IDE routines over to use the new function and
tidy-up the remaining code as required.

[Maintainer edit: printf format codes adjusted for 32/64bit. --js]
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1425939893-14404-3-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: NJohn Snow <jsnow@redhat.com>