Fixes receiving signals when guest code is being executed in a tight
loop. For an example, try interrupting the following code with ctrl-c.

http://nchipin.kos.to/test-loop.c

The tight loop is ofcourse brainless, but it is also exactly how the waitpid* testcases
are implemented.
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fixes breakage by 299060a0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

We really need compile _all_ sources for user target with -fpie when
use --enable-user-pie.

It's regression introduced by commit add16157.
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When using the escc with Linux, we need interrupts. So instead of creating
a dummy device, let's just map them to the openpic we have anyways.

This makes Linux on PPC64 with console=ttyPZ0 work.

Obviously, this change needs to be reflected in openbios. Patch for that
follows this one. Please update the binary then.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When lowering an IRQ line, we search for the line we're supposed to lower.

Usually we run into an optimization there that queues up interrupts. This
queue ends with -1. Unfortunately we didn't set the first item to -1.

This patch fixes this, making interrupts work on PPC64.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The only change is updating the makefile but that way we're carrying an official
release.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 3a492104.

From Luiz:

  do_migrate_set_speed() accepts a suffix for the 'value' argument and this is
  not good for QMP.  We will have to add a new argument type to handle that and
  this will have to wait for 0.13.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Otherwise, the driver does not work in Linux after the INT_DISABLE changes in
PCI.

Michael Tsirkin had a patch to do this, I'm not sure what happened to it.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This makes do_balloon() accept megabyte values from the user
Monitor while accepting byte values for QMP.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is a target long value in megabytes which should be
converted to bytes.

It will be used by handlers which accept a megabyte value
when in "user mode".
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

- Remove "draft" status
- Change default success response to be json-object
- Change error and event data member to be a json-object
- Update examples
- Add new section "Compatibility Considerations"
- Other fixes and clarifications
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

- Fix output description
- Fix command-line usage notes
- Minor improvements
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is for debug purposes only.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently, when a regular command doesn't have any data to output,
QMP will emit:

{ "return": "OK" }

Returning an empty dict is better though, because dicts can support
some protocol changes in a compatible way.

So, with this commit we will return:

{ "return": {} }
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Looks like I dropped this check when addressing the 'query-'
commands request.

QMP should only handle converted commands, obviously.
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

My segment sync patch broke compilation on PPC32, because it was trying to
sync the SLB even though ppc32 CPUs don't have an SLB.

So let's only sync it when we're on a PP64 one!
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Convert musb fifo to 8bit to allow 8/16/32bit access

MUSB allows reading and writing to the fifo in 32/16/8 bit
width. The Linux kernel does this sometimes, most usually at
the end of writing the packet to allow packet to end at a
odd bytecount.

Convert the fifo to 8bit allows removing lots of shifts
which shows that the fifo is more natural as 8bit.

While at it, add multiple missing register definitions and
and cleanup debug prints.
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

From: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Simplifies power budget negotiation.
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The limit of iomem areas is quite low. Without the
debug print, it is quite hard to figure out why more
devices are not getting registered.
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

At least under some mingw compilers slirp networking fails without declaring
these fields packed.

From: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Explicit read/write locking pidfile under WIN32 is bit extreme
nobody get the chance to read the pidfile. Convert to a write-only lock.

Also, creating pidfile was disabled along with daemonize under
WIN32. Enable it, but do not enable daemon support which doesn't
exist under WIN32 atm.

From: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

/tmp doesn't exist under win32. Ease the pain of win32 development slightly.

From: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Also remove pcbios from the tree.  It will no longer work.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now that we load the option roms via fw_cfg, we can stop copying
them to the 0xc000 -> 0xe000.  The patch does just that.

Also the rom loader gets simplified as all remaining users of the
rom loader load the bits at a fixed address so the packing and
aligning logic can go away.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

roms: use fw_cfg for vgabios and option rom loading, additionally to
deploying them the traditional way (copy to 0xc0000 -> 0xe0000 range).
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds a file transfer interface to fw_cfg.  Intended to be
used for passing non-pci option roms and vgabios to seabios.  Namespace
is modeled after the existing cbfs filesystem support in seabios.

Reading the new FW_CFG_FILE_DIR entry returns a file list.
Fields there are in network byte order (aka bigendian).

aliguori: fix fw_cfg.h for multiboot.bin, add proper fw_cfg.h declarations,
          quiet fprintf() in fw_cfg.c
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds a romfile property to the pci bus.  It allows to specify
a romfile to load into the rom bar of the pci device.  The default value
comes from a new field in PCIDeviceInfo.  The property allows to change
the file and also to disable the rom loading using an empty string.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently, we preload option roms into the option rom space in memory.  This
prevents DDIM from functioning correctly which severely limits the number
of roms we can support.

This patch introduces a pci_add_option_rom() which registers the
PCI_ROM_ADDRESS bar which points to our option rom.  It also converts over
the cirrus vga adapter, the rtl8139, virtio, and the e1000 to use this
new mechanism.

The result is that PXE boot functions even with three unique types of cards.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

SCSI controllers have no trouble existing without any attached
disks. This could be achieved with the (legacy) monitor syntax

  pci_add pci_addr=auto storage if=scsi

This is now denied with

  scsi requires a backing file/device.
  failed to add if=scsi

There is no need for this denial and it breaks compatability
with existing QEMU usage, so remove the check for presence
of a drive.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

0.11 uses as instance ide io_base, get it back
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Floppy used the io_base address to register savevm region.

This reverts commit 2966b390.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This allows to suspend command interpretation and execution
synchronously, e.g. during migration.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit ebbc8a3d.

As suggested by Jan Kiszka,

  "It was obsoleted by d1793b836f8f123b961c613de1bb1c0c185c84cc and now
   saves/restores a useless field."
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The cursor pixmap size we calculate later ends up being 4096 dwords
long by the looks of it. This boots an F12 LiveCD now.
Signed-off-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch enables dirty log tracking whenever it's needed and disables it
when it is not.

We unconditionally enable dirty log tracking on reset, restart dirty log
tracking when PCI IO regions are remapped, and disable/enable it based on
commands from the guest.
Rebased-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

VMware VGA requires that the depth presented to the guest is the same as the
DisplaySurface that it renders to.  This is because it performs a very simple
memcpy() to blit from one surface to another.

We currently hardcode a 24-bit depth.  The surface allocator for SDL may, and
usually will, allocate a surface with a different depth causing screen
corruption.

This changes the code to allocate the DisplaySurface before initializing the
device which allows the depth of the DisplaySurface to be used instead of
hardcoding something.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>