提交 · f75247f172ec68d93a8d4d6887f65ed8b579f4d3 · openeuler / qemu

11 8月, 2009 16 次提交

qdev/isa: make the piix isa bridge register an isa bus. · f75247f1

由 Gerd Hoffmann 提交于 7月 31, 2009

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

f75247f1

qdev/isa: add qdev support to i8042 (aka ps/2 kbd+mouse). · da85ccfb

由 Gerd Hoffmann 提交于 7月 31, 2009

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

da85ccfb

qdev/isa: add isa bus support to qdev. · f915a115

由 Gerd Hoffmann 提交于 7月 31, 2009

Pretty simple and straigt forward.
IRQs modeled simliar to sysbus.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

f915a115

qdev-ify virtio-blk. · d176c495

由 Gerd Hoffmann 提交于 7月 31, 2009

First user of the new drive property.  With this patch applied host
and guest config can be specified separately, like this:

  -drive if=none,id=disk1,file=/path/to/disk.img
  -device virtio-blk-pci,drive=disk1

You can set any property for virtio-blk-pci now.  You can set the pci
address via addr=.  You can switch the device into 0.10 compat mode
using class=0x0180.  As this is per device you can have one 0.10 and one
0.11 virtio block device in a single virtual machine.

Old syntax continues to work.  Internally it does the same as the two
lines above though.  One side effect this has is a different
initialization order, which might result in a different pci address
being assigned by default.

Long term plan here is to have this working for all block devices, i.e.
once all scsi is properly qdev-ified you will be able to do something
like this:

  -drive if=none,id=sda,file=/path/to/disk.img
  -device lsi,id=lsi,addr=<pciaddr>
  -device scsi-disk,drive=sda,bus=lsi.0,lun=<n>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

d176c495

qdev/prop: add drive property. · 14b41872

由 Gerd Hoffmann 提交于 7月 31, 2009

Adds a (host) drive property, intended to be used by virtual disk
backend drivers.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

14b41872

add -drive if=none · a8659e90

由 Gerd Hoffmann 提交于 7月 31, 2009

This adds a host drive, but doesn't implicitly add a guest drive for it.
First step in splitting host and guest configuration, check the
following patches to see how this can be used ...
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

a8659e90

constify drive_get_by_id arg · 2e810b36

由 Gerd Hoffmann 提交于 7月 31, 2009

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

2e810b36

QemuOpts: switch over -device. · f31d07d1

由 Gerd Hoffmann 提交于 7月 31, 2009

Make -device switch use the QemuOpts framework.
Everything should continue to work like it did before.

New: "-set device.$id.$property=$value" works.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

f31d07d1

QemuOpts: add -set option · d058fe03

由 Gerd Hoffmann 提交于 7月 31, 2009

One use case will be file for drives (no filename quoting issues), i.e.

	-drive id=test,if=virtio
	-set drive.test.file=/vmdisk/test-virtio.img

It will work for any other option (assuming handled by QemuOpts) though.
Except for id= for obvious reasons ;).
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

d058fe03

QemuOpts: create qemu-config.h · 7282a033

由 Gerd Hoffmann 提交于 7月 31, 2009

Move drive option description there.
Rename it, give it a qemu_ prefix.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

7282a033

QemuOpts: make the drive id actually show up in "info block". · e23d9c4d

由 Gerd Hoffmann 提交于 7月 31, 2009

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

e23d9c4d

QemuOpts: qemu_opts_parse: fix id= parsing · 6d378185

由 Gerd Hoffmann 提交于 7月 31, 2009

We can't use get_param_value(), it can't handle parameters without
'=' in there.  Examples not working because of that:

  -device foo,id=bar
  -device file=/path/image,format=qcow2,snapshot,id=disk0
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

6d378185

QemuOpts: add some functions · 48026075

由 Gerd Hoffmann 提交于 7月 31, 2009

qemu_opt_foreach: loop over all QemuOpts entries.
qemu_opts_id: return QemuOpts id.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

48026075

Fix symfind. · ec822001

由 Laurent Desnogues 提交于 7月 30, 2009

this patch fixes an issue in symfind.

Assume you have the following symbols:

Address  Size
0045bca0 00000080 T s0
0045bd20 00000112 T s1

You'll notice that s1 is s0 + size.

So the current symfind will find that address 0045bd20 belongs to s0
instead of s1.

Laurent
Signed-off-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

ec822001

configure: let it find xen headers and libs · ac8ab73a

由 Christoph Egger 提交于 7月 30, 2009

Attached patch lets configure find xen headers and libs
with --extra-cflags and --extra-ldlfags option.
Signed-off-by: NChristoph Egger <Christoph.Egger@amd.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

ac8ab73a

tolower -> qemu_tolower · bb87ece5

由 Christoph Egger 提交于 7月 30, 2009

Use qemu_tolower() instead of tolower().
Fixes warning on NetBSD.
Signed-off-by: NChristoph Egger <Christoph.Egger@amd.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id:

bb87ece5

10 8月, 2009 1 次提交
- M
  Do not try to invoke shebang scripts directly (NFS issues) · 0ff6697d
  由 malc 提交于 8月 10, 2009
```
Signed-off-by: Nmalc <av1474@comtv.ru>
```
  0ff6697d
09 8月, 2009 8 次提交
- B
  Use qemu_irq for system_powerdown · d9c32310
  由 Blue Swirl 提交于 8月 09, 2009
```
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
```
  d9c32310
- B
  Sparc32: use qemu_irq for system_powerdown · b2b6f6ec
  由 Blue Swirl 提交于 8月 09, 2009
```
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
```
  b2b6f6ec
- B
  Sparc32: move sparc32_dma init to sun4m.c · 74ff8d90
  由 Blue Swirl 提交于 8月 08, 2009
```
Also connect ESP and Lance reset signals to DMA.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
```
  74ff8d90
- B
  Sparc32: remove VRAM and NVRAM sizes from hwdef · d95d8f1c
  由 Blue Swirl 提交于 8月 08, 2009
```
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
```
  d95d8f1c
- B
  Sparc32: remove IRQ numbers from hwdef · c533e0b3
  由 Blue Swirl 提交于 8月 08, 2009
```
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
```
  c533e0b3
- B
  Sparc32: move intbit_to_level table back to slavio_intctl.c · 68556e2e
  由 Blue Swirl 提交于 8月 08, 2009
```
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
```
  68556e2e
- B
  Sparc32: move device instantiation to sun4m.c · 4b48bf05
  由 Blue Swirl 提交于 8月 08, 2009
```
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
```
  4b48bf05
- B
  Sparc32: Refactor slavio timer · 7204ff9c
  由 Blue Swirl 提交于 8月 08, 2009
```
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
```
  7204ff9c
08 8月, 2009 3 次提交

ppc_newworld: configure screen size from QEMU command line options · 10696b4f

由 Blue Swirl 提交于 8月 08, 2009

Use the FW_CFG interface to send user requested screen size and depth to
OpenBIOS like 7f1aec5f for ppc_oldworld.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

10696b4f

Sparc64: configure screen size from QEMU command line options · 7589690c

由 Blue Swirl 提交于 8月 08, 2009

Use the FW_CFG interface to send user requested screen size and depth to
OpenBIOS like 7f1aec5f for ppc_oldworld.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

7589690c

ppc_oldworld: configure screen size from qemu command line options · 7f1aec5f

由 Laurent Vivier 提交于 8月 08, 2009

This patch uses the FW_CFG interface to send user requested screen size
and depth to openbios.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

7f1aec5f

05 8月, 2009 1 次提交

Sparc64: replace tsptr with helper routine · 8194f35a

由 Igor Kovalenko 提交于 8月 03, 2009

tl and tsptr of members sparc64 cpu state must be changed
simultaneously to keep trap state window in sync with current
trap level. Currently translation of store to tl does not change
tsptr, which leads to corrupt trap state on corresponding
trap level.

This patch removes tsptr from sparc64 cpu state and replaces
all uses with call to helper routine.

Changes v0->v1:
- reimplemented helper routine with tcg generator
- on cpu reset trap type and pstate are populated with power-on reset
values, including tl=maxtl

Signed-off-by: igor.v.kovalenko@gmail.com
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

8194f35a

04 8月, 2009 7 次提交

N
linux-user: make FUTEX_* calls honor timeout parameter · a16aae0c
由 Nathan Froyd 提交于 8月 03, 2009
```
Signed-off-by: NNathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Nmalc <av1474@comtv.ru>
```
a16aae0c

enable NPTL for ppc-linux-user targets in configure · d6630708