- 27 6月, 2018 2 次提交
-
-
由 Philippe Mathieu-Daudé 提交于
hw_error() finally calls abort(), but there is no need to abort here. Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180624040609.17572-13-f4bug@amsat.org Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Philippe Mathieu-Daudé 提交于
Suggested-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180624040609.17572-12-f4bug@amsat.org Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 27 1月, 2017 1 次提交
-
-
由 Michael Davidsaver 提交于
When the guest attempts to start an MII register access via the MCTL register, clear the START bit, so that when the guest reads it back the register transaction will be signalled as having completed. This avoids the guest spinning as it polls the START bit waiting for it to clear (which it previously never would). The MII registers themselves still aren't implemented, but at least we can avoid guests spending quite so much time busy waiting. Signed-off-by: NMichael Davidsaver <mdavidsaver@gmail.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1484938222-1423-1-git-send-email-peter.maydell@linaro.org [PMM: expand commit message] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 20 7月, 2016 1 次提交
-
-
由 Eric Blake 提交于
This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
- 11 4月, 2016 1 次提交
-
-
由 Prasad J Pandit 提交于
When receiving packets over Stellaris ethernet controller, it uses receive buffer of size 2048 bytes. In case the controller accepts large(MTU) packets, it could lead to memory corruption. Add check to avoid it. Reported-by: NOleksandr Bazhaniuk <oleksandr.bazhaniuk@intel.com> Signed-off-by: NPrasad J Pandit <pjp@fedoraproject.org> Message-id: 1460095428-22698-1-git-send-email-ppandit@redhat.com Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 29 1月, 2016 1 次提交
-
-
由 Peter Maydell 提交于
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
-
- 27 7月, 2015 1 次提交
-
-
由 Fam Zheng 提交于
If s->np reaches 31, the queue will be disabled by peer when it sees stellaris_enet_can_receive() returns false, until we explicitly flushes it which notifies the peer. Do this when guest is done reading all existing data. Move the semantics to stellaris_enet_receive, by returning 0 when the buffer is full, so that new packets will be queued. In stellaris_enet_read, flush and restart the queue when guest has done reading. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NJason Wang <jasowang@redhat.com> Message-id: 1436955553-22791-11-git-send-email-famz@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 12 1月, 2015 1 次提交
-
-
由 Paolo Bonzini 提交于
All NICs have a cleanup function that, in most cases, zeroes the pointer to the NICState. In some cases, it frees data belonging to the NIC. However, this function is never called except when exiting from QEMU. It is not necessary to NULL pointers and free data here; the right place to do that would be in the device's unrealize function, after calling qemu_del_nic. Zeroing the NIC multiple times is also wrong for multiqueue devices. This cleanup function gets in the way of making the NetClientStates for the NIC hold an object_ref reference to the object, so get rid of it. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 18 8月, 2014 1 次提交
-
-
由 Paolo Bonzini 提交于
The function is empty after the previous patch, so remove it. Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 13 5月, 2014 7 次提交
-
-
由 Peter Maydell 提交于
Convert this device to use vmstate for its save/load, including providing a post_load function that sanitizes inbound data to avoid possible buffer overflows if it is malicious. The sanitizing fixes CVE-2013-4532 (though nobody should be relying on the security properties of most of the unmaintained ARM board models anyway, and migration doesn't actually work on this board due to issues in other device models). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Peter Maydell 提交于
The rx_fifo pointer is awkward to migrate, and is actually redundant since it is always possible to determine it from the current rx[].len/.data and rx_fifo_len. Remove both rx_fifo and rx_fifo_len from the state, replacing them with a simple rx_fifo_offset which points at the current location in the RX fifo. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Peter Maydell 提交于
Fix various debug format strings which were incorrect for the data type, so that building with debug enabled is possible. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Peter Maydell 提交于
Packet transmission for the stellaris ethernet controller can be triggered in one of two ways: * by setting a threshold value in the THR register; when the FIFO fill level reaches the threshold, the h/w starts transmitting. Software has to finish filling the FIFO before the transmit process completes to avoid a (silent) underrun * by software writing to the TR register to explicitly trigger transmission Since QEMU transmits packets instantaneously (from the guest's point of view), implement "transmit based on threshold" with our existing mechanism of "transmit as soon as we have the whole packet", with the additional wrinkle that we don't transmit if the packet size is below the specified threshold, and implement "transmit by specific request" properly. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Peter Maydell 提交于
The datasheet is clear that the frame length written to the DATA register is actually stored in the TX FIFO; this means we don't need to keep both tx_frame_len and tx_fifo_len state separately. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Peter Maydell 提交于
The PADEN bit in the transmit control register enables padding of short data packets out to the required minimum length. However a typo here meant we were adjusting tx_fifo_len rather than tx_frame_len, so the padding didn't actually happen. Fix this bug. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Cc: qemu-stable@nongnu.org
-
由 Peter Maydell 提交于
The current tx_fifo code has a corner case where the guest can overrun the fifo buffer: if automatic CRCs are disabled we allow the guest to write the CRC word even if there isn't actually space for it in the FIFO. The datasheet is unclear about exactly how the hardware deals with this situation; the most plausible answer seems to be that the CRC word is just lost. Implement this fix by separating the "can we stuff another word in the FIFO" logic from the "should we transmit the packet now" check. This also moves us closer to the real hardware, which has a number of ways it can be configured to trigger sending the packet, some of which we don't implement. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Cc: qemu-stable@nongnu.org
-
- 27 2月, 2014 1 次提交
-
-
由 Peter Maydell 提交于
Add a cast to avoid an unintended sign extension that would mean we returned 0xffffffff in the high 32 bits for an IA0 read if bit 31 in the MAC address was 1. (This is harmless since we'll only be doing 4 byte reads, but it could be confusing, so best avoided.) Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NAndreas Färber <afaerber@suse.de> Message-id: 1392647854-8067-3-git-send-email-peter.maydell@linaro.org
-
- 30 7月, 2013 2 次提交
-
-
由 Andreas Färber 提交于
Drop freeing stellaris_enet_state - that is done by QOM later on unref. Both MemoryRegion init and savevm registration happen in SysBusDevice initfn currently, so move them into an unrealizefn for now. Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 04 7月, 2013 2 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 09 4月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 01 3月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Done with this script: cd hw for i in `find . -name '*.h' | sed 's/^..//'`; do echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,' done | sed -i -f - `find . -type f` This is so that paths remain valid as files are moved. Instead, files in hw/dataplane are referenced with the relative path. We know they are not going to move to include/, and they are the only include files that are in subdirectories _and_ move. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 02 2月, 2013 2 次提交
-
-
由 Jason Wang 提交于
To support multiqueue, this patch introduces a helper qemu_get_nic() to get NICState from a NetClientState. The following patches would refactor this helper to support multiqueue. Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jason Wang 提交于
To support multiqueue, the patch introduce a helper qemu_get_queue() which is used to get the NetClientState of a device. The following patches would refactor this helper to support multiqueue. Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 1月, 2013 1 次提交
-
-
由 Andreas Färber 提交于
Since 39bffca2 (qdev: register all types natively through QEMU Object Model), TypeInfo as used in the common, non-iterative pattern is no longer amended with information and should therefore be const. Fix the documented QOM examples: sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h Since frequently the wrong examples are being copied by contributors of new devices, fix all types in the tree: sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c This also avoids to piggy-back these changes onto real functional changes or other refactorings. Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 19 12月, 2012 1 次提交
-
-
由 Paolo Bonzini 提交于
Move public headers to include/net, and leave private headers in net/. Put the virtio headers in include/net/tap.h, removing the multiple copies that existed. Leave include/net/tap.h as the interface for NICs, and net/tap_int.h as the interface for OS-specific parts of the tap backend. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 23 10月, 2012 1 次提交
-
-
由 Avi Kivity 提交于
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 01 8月, 2012 1 次提交
-
-
由 Stefan Hajnoczi 提交于
The vlan feature is no longer part of net core. Rename VLANClientState to NetClientState because net clients are not explicitly associated with a vlan at all, instead they have a peer net client to which they are connected. This patch is a mechanical search-and-replace except for a few whitespace fixups where changing VLANClientState to NetClientState misaligned whitespace. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
- 23 7月, 2012 1 次提交
-
-
由 Laszlo Ersek 提交于
NET_CLIENT_TYPE_ -> NET_CLIENT_OPTIONS_KIND_ Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 15 2月, 2012 1 次提交
-
-
由 Andreas Färber 提交于
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: NAndreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 2月, 2012 1 次提交
-
-
由 Anthony Liguori 提交于
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 1月, 2012 2 次提交
-
-
由 Anthony Liguori 提交于
This converts three devices because apic and ioapic are subclasses of sysbus. Converting subclasses independently of their base class is prohibitively hard. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
We already have a QOM interface for this so let's use it. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 11月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 04 9月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 26 8月, 2011 1 次提交
-
-
由 Anthony Liguori 提交于
This reverts commit 8ef9ea85, reversing changes made to 444dc482. From Avi: Please revert the entire pull (git revert 8ef9ea85) while I work this out - it isn't trivial. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 25 8月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 21 8月, 2011 1 次提交
-
-
由 Anthony Liguori 提交于
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 24 7月, 2011 1 次提交
-
-
由 Matthew Fernandez 提交于
Correct typos of "licenced" to "licensed". Reviewed-by: NStefan Weil <weil@mail.berlios.de> Reviewed-by: NAndreas F=E4rber <andreas.faerber@web.de> Signed-off-by: NMatthew Fernandez <matthew.fernandez@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-