This adds a more generic infrastructure for handling Service-Call
requests on s390. Currently we only support a small subset of Read
SCP Info directly in target-s390x. This patch provides the base
infrastructure for supporting more commands and moves Read SCP
Info.
In the future we could add additional commands for hotplug, call
home and event handling.
Signed-off-by: NHeinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Newer kernels provide the guest registers in kvm_run. Lets use
those if available (i.e. the capability is set). This avoids
ioctls on cpu_synchronize_state making intercepts faster.

In addition, we have now the prefix register, the access registers
the control registers up to date. This helps in certain cases,
e.g. for resolving kernel module addresses with gdb on a guest.

On return, we update the registers according to the level statement,
i.e. we put all registers for KVM_PUT_FULL_STATE and _RESET_STATE.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Correct sys_perf_event_open syscall number for s390 architecture
   - the hardcoded syscall number 298 is for x86 but should
     be different for other architectures.
     In case we figure out via /proc/cpuinfo that we are running
     on s390 the appropriate syscall number is used from map
     syscall_numbers; other architectures can extend this.
Signed-off-by: NHeinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When using -initrd in the virtio machine, we need to indicate the initrd
start and size inside the kernel image. These parameters need to be stored
in native endianness.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Acked-by: NRichard Henderson <rth@twiddle.net>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Calling memory_region_destroy() in a transaction is illegal (and aborts),
as until the transaction is committed, the region remains live.

Fix by moving destruction until after the transaction commits.  This requires
having an extra set of regions, so the new and old regions can coexist.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* kraxel/usb.68: (36 commits)
  xhci: fix usb name in caps
  xhci: make number of interrupters and slots configurable
  xhci: allow disabling interrupters
  xhci: flush endpoint context unconditinally
  xhci: fix function name in error message
  uhci: Use only one queue for ctrl endpoints
  uhci: Retry to fill the queue while waiting for td completion
  uhci: Always mark a queue valid when we encounter it
  uhci: When the guest marks a pending td non-active, cancel the queue
  uhci: Detect guest td re-use
  uhci: Verify queue has not been changed by guest
  uhci: Immediately free queues on device disconnect
  uhci: Store ep in UHCIQueue
  uhci: Make uhci_fill_queue() actually operate on an UHCIQueue
  uhci: Add uhci_read_td() helper function
  uhci: Rename UHCIAsync->td to UHCIAsync->td_addr
  uhci: Move emptying of the queue's asyncs' queue to uhci_queue_free
  uhci: Drop unnecessary forward declaration of some static functions
  uhci: Don't retry on error
  uhci: cleanup: Add an unlink call to uhci_async_cancel()
  ...
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* kwolf/for-anthony: (32 commits)
  osdep: Less restrictive F_SEFL in qemu_dup_flags()
  qemu-iotests: add testcases for mirroring on-source-error/on-target-error
  qmp: add pull_event function
  mirror: add support for on-source-error/on-target-error
  iostatus: forward block_job_iostatus_reset to block job
  qemu-iotests: add mirroring test case
  mirror: implement completion
  qmp: add drive-mirror command
  mirror: introduce mirror job
  block: introduce BLOCK_JOB_READY event
  block: add block-job-complete
  block: rename block_job_complete to block_job_completed
  block: export dirty bitmap information in query-block
  block: introduce new dirty bitmap functionality
  block: add bdrv_open_backing_file
  block: add bdrv_query_stats
  block: add bdrv_query_info
  qemu-config: Add new -add-fd command line option
  monitor: Prevent removing fd from set during init
  monitor: Enable adding an inherited fd to an fd set
  ...

Conflicts:
	vl.c
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (22 commits)
  PPC: pseries: Remove hack for PIO window
  PPC: e500: Map PIO space into core memory region
  xen_platform: convert PIO to new memory api read/write
  vmport: convert PIO to new memory api read/write
  serial: convert PIO to new memory api read/write
  rtl8139: convert PIO to new memory api read/write
  pckbd: convert PIO to new memory api read/write
  pc port92: convert PIO to new memory api read/write
  mc146818rtc: convert PIO to new memory api read/write
  m48t59: convert PIO to new memory api read/write
  i8254: convert PIO to new memory api read/write
  es1370: convert PIO to new memory api read/write
  virtio-pci: convert PIO to new memory api read/write
  ac97: convert PIO to new memory api read/write
  pseries: Implement qemu initiated shutdowns using EPOW events
  target-ppc: Rework storage of VPA registration state
  pseries: Don't allow duplicate registration of hcalls or RTAS calls
  Add USB option in machine options
  e500: Fix serial initialization
  PPC: 440: Emulate DCBR0
  ...

* 'queue/qmp' of git://repo.or.cz/qemu/qmp-unstable:
  migration: go to paused state after finishing incoming migration with -S
  qmp: handle stop/cont in INMIGRATE state
  hmp: fix info cpus for sparc targets

Now that all users of old_portio are gone, we can remove the hack
that enabled us to support them.
Signed-off-by: NAlexander Graf <agraf@suse.de>

On PPC, we don't have PIO. So usually PIO space behind a PCI bridge is
accessible via MMIO. Do this mapping explicitly by mapping the PIO space
of our PCI bus into a memory region that lives in memory space.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAlexander Graf <agraf@suse.de>

At present, using 'system_powerdown' from the monitor or otherwise
instructing qemu to (cleanly) shut down a pseries guest will not work,
because we did not have a method of signalling the shutdown request to the
guest.

PAPR does include a usable mechanism for this, though it is rather more
involved than the equivalent on x86.  This involves sending an EPOW
(Environmental and POwer Warning) event through the PAPR event and error
logging mechanism, which also has a number of other functions.

This patch implements just enough of the event/error logging functionality
to be able to send a shutdown event to the guest.  At least with modern
guest kernels and a userspace that is up and running, this means that
system_powerdown from the qemu monitor should now work correctly on pseries
guests.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

With PAPR guests, hypercalls allow registration of the Virtual Processor
Area (VPA), SLB shadow and dispatch trace log (DTL), each of which allow
for certain communication between the guest and hypervisor.  Currently, we
store the addresses of the three areas and the size of the dtl in
CPUPPCState.

The SLB shadow and DTL are variable sized, with the size being retrieved
from within the registered memory area at the hypercall time.  This size
can later be overwritten with other information, however, so we need to
save the size as of registration time.  We already do this for the DTL,
but not for the SLB shadow, so this patch fixes that.

In addition, we change the storage of the VPA information to use fixed
size integer types which will make life easier for syncing this data with
KVM, which we will need in future.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently the pseries machine code allows a callback to be registered
for a hypercall number twice, as long as it's the same callback the second
time.  We don't test for duplicate registrations of RTAS callbacks at all
so it will effectively be last registratiojn wins.

This was originally done because it was awkward to ensure that the
registration happened exactly once, but the code has since been
restructured so that's no longer the case.

Duplicate registration of a hypercall or RTAS call could well suggest
a duplicate initialization which could cause other problems, so this patch
makes duplicate registrations a bug, to prevent the old behaviour from
hiding other bugs.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When -usb option is used, global varible usb_enabled is set.
And all the plaform will create one USB controller according
to this variable. In fact, global varibles make code hard
to read.

So this patch is to remove global variable usb_enabled and
add USB option in machine options. All the plaforms will get
USB option value from machine options.

USB option of machine options will be set either by:
  * -usb
  * -machine type=pseries,usb=on

Both these ways can work now. They both set USB option in
machine options. In the future, the first way will be removed.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

it was wrongly using serial_hds[0] instead of serial_hds[1]
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The DCBR0 register on 440 is used to implement system reset. The same
register is used on 405 as well, so just reuse the code.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Device tree properties need to be specified in big endian. Fix the
bamboo memory size property accordingly.
Signed-off-by: NAlexander Graf <agraf@suse.de>
CC: qemu-stable@nongnu.org

For all our PPC targets the physical address space is at least
36 bits, so drop an unnecessary preprocessor conditional check
on TARGET_PHYS_ADDR_SPACE_BITS (erroneously introduced as part
of the change from target_phys_addr_t to hwaddr). This brings
this bit of code into line with the way we handle the other
cases which were originally checking TARGET_PHYS_ADDR_BITS in
order to avoid compiler complaints about overflowing a 32 bit type.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

I removed a line by mistake on commit
3b671a40, containing the flags lm/i64,
3dnow, and 3dnowext. This patch restores the removed line.
Reviewed-by: NDon Slutz <Don@cloudswitch.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Older glibc (RHEL 5.x, Debian 5.x) does not have the _sigev_un._tid
member in its structure definition, while the accompanying kernel
headers do define SIGEV_THREAD_ID.  We need configure to check for
both before using it.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When we allocate a reserved_va for the guest, the kernel will likely
choose an address well above 4G.  At which point we must use a pair
of movabsq+addq to form the host address.  If we have OS support,
set up a segment register to point to guest_base instead.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

With normal FP, this doesn't have much affect on the generated code,
because most of the FP operations are not CONST/PURE, and so we spill
registers in about the same frequency as the explicit load/stores.

But with Loongson multimedia instructions, which are all integral and
whose helpers are in fact CONST+PURE, this greatly improves the code.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.

Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Acked-by: NBlue Swirl <blauwirbel@gmail.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.

Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>