Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Avoid truncation of a 64-bit long to a 32-bit int, and check for errno
(especially ERANGE).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

When requesting a size which cannot be read, the error message shows
a different address which is misleading to the user and it looks like
something's wrong with the address parsing. This is because the input
@addr variable is incremented in the memory dumping loop:

(qemu) memsave 0xffffffff8418069c 0xb00000 mem
Invalid addr 0xffffffff849ffe9c specified

Fix that by saving the original address and size and use them in the
error message:

(qemu) memsave 0xffffffff8418069c 0xb00000 mem
Invalid addr 0xffffffff8418069c/size 11534336 specified
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The "fall through" added by the commit is clearly intentional.  Mark
it so.  Hushes up Coverity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The array length of s->real_device.io_regions[] is
"PCI_NUM_REGIONS - 1".
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Coverity spot:
Function xen_pt_bar_offset_to_index() may return a negative
value (-1) which is used as an index to d->io_regions[] down
the line.

Let's pass index directly as an argument to
xen_pt_bar_reg_parse().
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Patch queue for ppc - 2015-03-09

This is my current patch queue for 2.3. Highlights include:

  * pseries: 2.3 machine
  * pseries: Export RTC via QOM
  * pseries: EEH support
  * mac: save/restore support
  * fix POWER5 hosts
  * random bug fixes

# gpg: Signature made Mon Mar  9 14:00:53 2015 GMT using RSA key ID 03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg:                 aka "Alexander Graf <alex@csgraf.de>"

* remotes/agraf/tags/signed-ppc-for-upstream: (38 commits)
  target-ppc: Fix warnings from Sparse
  sPAPR: Implement sPAPRPHBClass EEH callbacks
  sPAPR: Implement EEH RTAS calls
  target-ppc: Add versions to server CPU descriptions
  PPC: Introduce the Virtual Time Base (VTB) SPR register
  PPC: Remove duplicate OPENPIC defines in default-configs
  ppc64-softmmu: Remove duplicated OPENPIC from config
  Revert "default-configs/ppc64: add all components of i82378 SuperIO chip used by prep"
  spapr_vio: Convert to realize()
  openpic: convert to vmstate
  openpic: switch IRQQueue queue from inline to bitmap
  openpic: fix up loadvm under -M mac99
  openpic: fix segfault on -M mac99 savevm
  target-ppc: force update of msr bits in cpu_post_load
  target-ppc: move sdr1 value change detection logic to helper_store_sdr1()
  cuda.c: include adb_poll_timer in VMStateDescription
  adb.c: include ADBDevice parent state in KBDState and MouseState
  macio.c: include parent PCIDevice state in VMStateDescription
  display cpu id dump state
  Openpic: check that cpu id is within the number of cpus
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Sparse report:

target-ppc/mmu-hash64.c:353:9: warning: returning void-valued expression
target-ppc/mmu-hash64.c:620:9: warning: returning void-valued expression
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The patch implements sPAPRPHBClass EEH callbacks so that the EEH
RTAS requests can be routed to VFIO for further handling.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The emulation for EEH RTAS requests from guest isn't covered
by QEMU yet and the patch implements them.

The patch defines constants used by EEH RTAS calls and adds
callbacks sPAPRPHBClass::{eeh_set_option, eeh_get_state, eeh_reset,
eeh_configure}, which are going to be used as follows:

  * RTAS calls are received in spapr_pci.c, sanity check is done
    there.
  * RTAS handlers handle what they can. If there is something it
    cannot handle and the corresponding sPAPRPHBClass callback is
    defined, it is called.
  * Those callbacks are only implemented for VFIO now. They do ioctl()
    to the IOMMU container fd to complete the calls. Error codes from
    that ioctl() are transferred back to the guest.

[aik: defined RTAS tokens for EEH RTAS calls]
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

5b79b1ca "target-ppc: Create versionless CPU class per family if KVM" added
a dynamic CPU class registration with the name of the CPU family which
QEMU is running on. For example, this allowed specifying "-cpu POWER7"
on every version of POWER7 machine, not just the one which POWER7 was
an alias of. I.e. before 5b79b1ca, "-cpu POWER7" would not work on real
POWER7 2.1 and would work on POWER7 2.3 only. The same story for POWER8.

However that patch broke POWER5+ support as POWER5+ CPU uses the same
name as the CPU class so dynamic registering of the POWER5+ class failed.

This redefines POWER5+ server CPUs by adding a version to them and adding
an alias for TCG case. KVM will use dynamically registered CPUs.

While we are here, do the same for 970 CPU.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch adds basic support for the VTB.

PowerISA:
The Virtual Time Base (VTB) is a 64-bit incrementing counter.
Virtual Time Base increments at the same rate as the Time Base until its value
becomes 0xFFFF_FFFF_FFFF_FFFF (2 64 - 1); at the next increment its value
becomes 0x0000_0000_0000_0000. There is no interrupt or other indication when
this occurs.

The operation of the Virtual Time Base has the following additional
properties.
1. Loading a GPR from the Virtual Time Base has no effect on the accuracy of
the Virtual Time Base.
2. Copying the contents of a GPR to the Virtual Time Base replaces the
contents of the Virtual Time Base with the contents of the GPR.
Signed-off-by: NCyril Bur <cyril.bur@au1.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The CONFIG_OPENPIC variable was declared multiple times. We only need it once.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This reverts commit 9c998424 as even when
it was applied, all supposedly new config options were already enabled.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Bonus fix: always set an error on failure.  Some failures were silent
before, except for the generic error set by device_realize().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This is in preparation for using VMSTATE_BITMAP in a followup vmstate
migration patch.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Issuing loadvm under -M mac99 would fail for two reasons: firstly an incorrect
version number for openpic would cause openpic_load() to abort, and secondly
a cut/paste error when restoring the IVPR and IDR registers caused subsequent
vmstate sections to become misaligned and abort early.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

A simple copy/paste error causes savevm on -M mac99 to segfault.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Since env->msr has already been restored by the time cpu_post_load is called,
make sure that ppc_store_msr() is explicitly called with all msr bits except
MSR_TGPR marked as invalid.

This solves the issue where MSR flags aren't set correctly when restoring a VM
snapshot, in particular the internal env->excp_prefix value when MSR_EP has
been altered by a guest.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Otherwise when cpu_post_load calls ppc_store_sdr1() when restoring a VM
snapshot the value is deemed unchanged and so the internal env->htab*
variables aren't set correctly.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Make sure that we include the adb_poll_timer when saving the VM state for
client OSs that use it, e.g. Darwin.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The parent ADBDevice contains the device id on the ADB bus. Make sure that
this state is included in both its subclasses since some clients (such as
OpenBIOS) reprogram each device id after enumeration.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This ensures that the macio PCI device is correctly configured when restoring
from a VM snapshot.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When the guest switches the interrupt endian mode, which essentially
means a global machine endian switch, we want to change the VGA
framebuffer endian mode as well in order to be backward compatible
with existing guests who don't know about the new endian control
register.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The VGA device model now supports having the framebuffer in either endian,
and can be switched between these by the guest via a register in the qext
region.

However, in some cases (e.g. LE OS on the pseries machine) we have
existing guest that don't know about the endian switch register, but other
parts of the qemu code have better information to set a default endianness
than the VGA code does of itself.

In order to allow them to set a correct default endianness in these cases,
without breaking abstraction walls, this patch exposes the VGA framebuffer
endianness via a writable QOM property.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
[agraf: use instance_init for property exposure]
Signed-off-by: NAlexander Graf <agraf@suse.de>

We call try_create_xics() to create a "xics-kvm".  If it fails, we
call it again to fall back to plain "xics".

try_create_xics() uses qdev_init().  qdev_init()'s error handling has
an unwanted side effect: it calls qerror_report_err(), which prints to
stderr.  Looks like an error, but isn't.

In QMP context, it would stash the error in the monitor instead,
making the QMP command fail.  Fortunately, it's only called from board
initialization, never in QMP context.

Clean up by cutting out the qdev_init() middle-man: set property
"realized" directly.

While there, improve the error message when we can't satisfy an
explicit user request for "xics-kvm", and exit(1) instead of abort().
Simplify the abort when we can't create "xics".
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
[agraf: squash in fix for uninitialized variable from mdroth]
Signed-off-by: NAlexander Graf <agraf@suse.de>