QEMU prints an error message and exits when the device enters an invalid
state.  Terminating the process is heavy-handed.  The guest may still be
able to function even if there is a bug in a virtio guest driver.

Moreover, exiting is a bug in nested virtualization where a nested guest
could DoS other nested guests by killing a pass-through virtio device.
I don't think this configuration is possible today but it is likely in
the future.

If the broken flag is set, do not process virtqueues or write back used
descriptors.  The broken flag can be cleared again by resetting the
device.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Fix a single occurrence of a tab character in a file that otherwise uses
spaces for indentation.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>

commit (14c985cf target-i386: present virtual L3 cache info for vcpus)
misplaced compat property putting it in new 2.8 machine type
which would effectively to disable feature until 2.9 is released.
Intent of commit probably should be to disable feature for 2.7
and older while allowing not yet released 2.8 to have feature
enabled by default.

Cc: qemu-stable@nongnu.org
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>

Since commit
 bacc344c ("machine: add properties to compat_props incrementaly")
there is no need to chain per machine type compat macro.

Clean up places where it was done anyway so it will be
consistent and won't confuse contributors during addtion
of new machine types.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>

virtio back end uses set of buffers to facilitate I/O operations.
If its size is too large, 'cpu_physical_memory_map' could return
a null address. This would result in a null dereference while
un-mapping descriptors. Add check to avoid it.
Reported-by: NQinghao Tang <luodalongde@gmail.com>
Signed-off-by: NPrasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

Check that qemu disconnects the backend that doesn't have the previously
acked features.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This test just checks that 2 virtio-net queues can be setup over
vhost-user and waits for them to be started.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Check early connection failure and resume.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

MIPS patches 2016-09-23

Changes:
* 24KEc CPU definition
* SYNC instructions make use of tcg memory barrier ops
* various MIPS linux-user bug fixes

# gpg: Signature made Fri 23 Sep 2016 08:09:08 BST
# gpg:                using RSA key 0x52118E3C0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
# Primary key fingerprint: 8DD3 2F98 5495 9D66 35D4  4FC0 5211 8E3C 0B29 DA6B

* remotes/lalrae/tags/mips-20160923:
  linux-user: Add missing Mips syscalls items in strace.list
  linux-user: Add missing TARGET_EDQUOT error code for Mips
  linux-user: Fix certain argument alignment cases for Mips64
  linux-user: Fix structure target_semid64_ds definition for Mips
  linux-user: Fix structure target_flock definition for Mips
  linux-user: Fix TARGET_F_GETOWN definition for Mips
  linux-user: Fix TARGET_SIOCATMARK definition for Mips
  target-mips: generate fences
  target-mips: add 24KEc CPU definition
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ppc patch queue 2016-09-23

This pull request supersedes ppc-for-2.8-20160922.  There was a clang
build error in that, and I've also added one extra patch in the new pull.

Included in this set of ppc and spapr patches are:
    * TCG implementations for more POWER9 instructions
    * Some preliminary XICS fixes in preparataion for the pnv machine type
    * A significant ADB (Macintosh kbd/mouse) cleanup
    * Some conversions to use trace instead of debug macros
    * Fixes to correctly handle global TLB flush synchronization in
      TCG.  This is already a bug, but it will have much more impact
      when we get MTTCG
    * Add more qtest testcases for Power
    * Some MAINTAINERS updates
    * Assorted bugfixes
    * Add the basics of NUMA associativity to the spapr PCI host bridge

This touches some test files and monitor.c which are technically
outside the ppc code, but coming through this tree because the changes
are primarily of interest to ppc.

# gpg: Signature made Fri 23 Sep 2016 08:14:47 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.8-20160923: (45 commits)
  spapr_pci: Add numa node id
  monitor: fix crash for platforms without a CPU 0
  linux-user: ppc64: fix ARCH_206 bit in AT_HWCAP
  ppc/kvm: Mark 64kB page size support as disabled if not available
  ppc/xics: An ICS with offset 0 is assumed to be uninitialized
  ppc/xics: account correct irq status
  Enable H_CLEAR_MOD and H_CLEAR_REF hypercalls on KVM/PPC64.
  target-ppc: tlbie/tlbivax should have global effect
  target-ppc: add flag in check_tlb_flush()
  target-ppc: add TLB_NEED_LOCAL_FLUSH flag
  spapr: Introduce sPAPRCPUCoreClass
  target-ppc: implement darn instruction
  target-ppc: add stxsi[bh]x instruction
  target-ppc: add lxsi[bw]zx instruction
  target-ppc: add xxspltib instruction
  target-ppc: consolidate store conditional
  target-ppc: move out stqcx impementation
  target-ppc: consolidate load with reservation
  target-ppc: convert st[16,32,64]r to use new macro
  target-ppc: convert st64 to use new macro
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Fri 23 Sep 2016 05:58:28 BST
# gpg:                using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/various-pull-request: (23 commits)
  docker: exec $CMD
  docker: Terminate instances at SIGTERM and SIGHUP
  docker: Support showing environment information
  docker: Print used options before doing configure
  docker: Flatten default target list in test-quick
  docker: Update fedora image to latest
  docker: Generate /packages.txt in ubuntu image
  docker: Generate /packages.txt in fedora image
  docker: Generate /packages.txt in centos6 image
  tests: Ignore test-uuid
  Add UUID files to MAINTAINERS
  tests: Add uuid tests
  uuid: Tighten uuid parse
  vl: Switch qemu_uuid to QemuUUID
  configure: Remove detection code for UUID
  tests: No longer dependent on CONFIG_UUID
  crypto: Switch to QEMU UUID API
  vpc: Use QEMU UUID API
  vdi: Use QEMU UUID API
  vhdx: Use QEMU UUID API
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	tests/Makefile.include

* More KVM LAPIC fixes
* fix divide-by-zero regression on libiscsi SG devices
* fix qemu-char segfault
* add scripts/show-fixed-bugs.sh

# gpg: Signature made Thu 22 Sep 2016 19:20:57 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  kvm: fix events.flags (KVM_VCPUEVENT_VALID_SMM) overwritten by 0
  scripts: Add a script to check for bug URLs in the git log
  msmouse: Fix segfault caused by free the chr before chardev cleanup.
  iscsi: Fix divide-by-zero regression on raw SG devices
  kvm: apic: set APIC base as part of kvm_apic_put
  target-i386: introduce kvm_put_one_msr
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Without this patch, a number of Mips syscalls will be logged in the following
way (in this example, this is an invocation of accept4()):

  86906 Unknown syscall 4334

This patch provides standard Qemu's strace output for such cases, like this:

  95861 accept4(3,1996486000,1996486016,128,0,0) = 5

Such output may be further improved by providing strace-related functions
that handle only particular syscalls, but this is beyond the scope of
this patch.
Signed-off-by: NAleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Acked-by: NRiku Voipio <riku.voipio@linaro.org>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

EDQUOT is defined for Mips platform in Linux kernel in such a way
that it has different value than on most other platforms. However,
correspondent TARGET_EDQUOT for Mips is missing in Qemu code. Moreover,
TARGET_EDQUOT is missing from the table for conversion of error codes
from host to target. This patch fixes these problems.

Without this patch, syscalls add_key(), keyctl(), link(), mkdir(), mknod(),
open(), rename(), request_key(), setxattr(), symlink(), and write() will not
be able to return the right error code in some scenarios on Mips platform.
(Some of these syscalls are not yet supported in Qemu, but once they are
supported, they will need correct EDQUOT handling.)
Signed-off-by: NAleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Acked-by: NRiku Voipio <riku.voipio@linaro.org>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

The function that is changed in this patch is supposed to indicate that
there was certain argument rearrangement related to 64-bit arguments on
32-bit platforms. The background on such rearrangements can be found,
for example, in the man page for syscall(2).

However, for 64-bit Mips architectures there is no such rearrangement,
and this patch reflects it.
Signed-off-by: NAleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: NAleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Acked-by: NRiku Voipio <riku.voipio@linaro.org>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

This patch corrects target_semid64_ds structure definition for Mips.

See, for example definition of semid64_ds for Mips in Linux kernel:
arch/mips/include/uapi/asm/sembuf.h#L13.

This patch will also fix certain semaphore-related LTP tests for Mips,
if they are executed in Qemu user mode for any Mips platform.
Signed-off-by: NMiodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: NAleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Acked-by: NRiku Voipio <riku.voipio@linaro.org>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Structure flock is defined for Mips in a way different from any
other platform. For reference, see Linux kernel source code files:

arch/mips/include/uapi/asm/fcntl.h, line 63 (for Mips)
include/uapi/asm-generic/fcntl.h, line 195 (for all other platforms)

This patch fix this problem, by amending structure target_flock,
for Mips only.

Besides, this patch fixes LTP tests fcntl11, fcntl17, fcntl19, fcntl20,
and fcntl21, which are currently failing, if executed in Qemu user mode
for Mips platforms.
Signed-off-by: NAleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Acked-by: NRiku Voipio <riku.voipio@linaro.org>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

For some reason, Qemu's TARGET_F_GETOWN constant for Mips does not
match the correct value of correspondent F_GETOWN. This patch fixes
this problem.

For reference, see Mips' F_GETOWN definition in Linux kernel at
arch/mips/include/uapi/asm/fcntl.h#L44.

This patch also fixes some fcntl()-related LTP tests for Qemu
user mode for Mips.
Signed-off-by: NMiodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: NAleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Acked-by: NRiku Voipio <riku.voipio@linaro.org>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

This patch fixes wrong definition of TARGET_SIOCATMARK for mips,
alpha, and sh4.

The current definition is:

  #define SIOCATMARK      0x8905

while the correct definition is:

  #define SIOCATMARK      TARGET_IOR('s', 7, int)

See Linux kernel source file arch/mips/include/uapi/asm/sockios.h#L19
for reference.

This patch also a fixes LTP test failure for test sockioctl01, for
mips, alpha, and sh4.
Signed-off-by: NAleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: NAleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Acked-by: NRiku Voipio <riku.voipio@linaro.org>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Make use of memory barrier TCG opcode in MIPS front end.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Define a new CPU definition supporting 24KEc cores, similar to
the existing 24Kc, but with added support for DSP instructions
and MIPS16e (and without FPU).
Signed-off-by: NAndré Draszik <git@andred.net>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

This is the last command to run (unless DEBUG), make it 'exec' to
simplify the process tree.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <1474429768-25027-10-git-send-email-famz@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <1474429768-25027-9-git-send-email-famz@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

Add a make variable SHOW_ENV. When it's set to non empty, print the
package information and environment variables.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <1474429768-25027-8-git-send-email-famz@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

This makes the configure command more obvious which usually has useful
information.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <1474429768-25027-7-git-send-email-famz@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

Previously it is expanded to a whitespace separated list which is not
the most appropriate format. Since it's only two items, flatten it.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <1474429768-25027-6-git-send-email-famz@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

Now that 23 is becoming an "old" release with 24 available. Fedora has a
quick release cycle, so use latest to follow more closely.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <1474429768-25027-5-git-send-email-famz@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

Put the list of package names in an environment, and output their
package names to the target file in the end.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <1474429768-25027-4-git-send-email-famz@redhat.com>
Reviewed-by: NDaniel. P. Berrange <berrange@redhat.com>

Put the list of package names in an environment, and output their
package names to the target file in the end.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <1474429768-25027-3-git-send-email-famz@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

Put the list of package names in an environment, and output their
package names to the target file in the end.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <1474429768-25027-2-git-send-email-famz@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <1474432046-325-14-git-send-email-famz@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

I understand that we've been keeping eyes on the uncovered files. Since
I'm adding some more files I volunteer to look after them in the futuer.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-13-git-send-email-famz@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-12-git-send-email-famz@redhat.com>

sscanf is relatively loose (tolerate) on some invalid formats that we
should fail instead of generating a wrong uuid structure, like with
whitespaces and short strings.

Add and use a helper function to first check the format.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-11-git-send-email-famz@redhat.com>

Update all qemu_uuid users as well, especially get rid of the duplicated
low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API.

Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to
QemuUUID is done here too to keep everything in sync and avoid code
churn.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>

All code now uses built-in UUID implementation. Remove the code of
libuuid and make --enable-uuid and --disable-uuid only print a message.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-9-git-send-email-famz@redhat.com>

crypto now uses built-in uuid implementation, so this check is not
needed.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-8-git-send-email-famz@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

The uuid generation doesn't return error, so update the function
signature and calling code accordingly.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-7-git-send-email-famz@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

Previously we conditionally generated footer->uuid, when libuuid was
available. Now that we have a built-in implementation, we can switch to
it.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-6-git-send-email-famz@redhat.com>

The UUID operations we need from libuuid are fully supported by QEMU UUID
implementation. Use it, and remove the unused code.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-5-git-send-email-famz@redhat.com>