Handle endianness conversion for virtio-1 virtqueues correctly.

Note that dataplane now needs to be built per-target.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Add a helper function for checking whether a bit is set in the guest
features for a vdev as well as one that works on a feature bit set.

Convert code that open-coded this: It cleans up the code and makes it
easier to extend the guest feature bits.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The vring.c code currently assumes that guest and host endianness match,
which is not true for a number of cases:

- emulating targets with a different endianness than the host
- bi-endian targets, where the correct endianness depends on the virtio
  device
- upcoming support for the virtio-1 standard mandates little-endian
  accesses even for big-endian targets and hosts

Make sure to use accessors that depend on the virtio device.

Note that dataplane now needs to be built per-target.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Tested-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1422289602-17874-2-git-send-email-cornelia.huck@de.ibm.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Several places check against the feature bit number instead of against
the feature bit. Fix them.

Cc: qemu-stable@nongnu.org
Reported-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The event idx in virtio is an effective way to reduce the number of
interrupts and exits of the guest. When the guest puts an request
into the virtio ring, it doesn't exit immediately to inform the
backend. Instead, the guest checks the "avail" event idx to determine
the notification.

In virtqueue_pop, when a request is poped, the current avail event
idx should be set to the number of vq->last_avail_idx.
Signed-off-by: NBin Wu <wu.wubin@huawei.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

To be more consistent inside this function.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1410329871-28885-3-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The memory allocation between hw/block/virtio-blk.c,
hw/block/dataplane/virtio-blk.c, and hw/virtio/dataplane/vring.c is
messy.  Structs are allocated in different files than they are freed in.
This is risky and makes memory leaks easier.

Embed VirtQueueElement in VirtIOBlockReq to reduce the amount of memory
allocation we need to juggle.  This also makes vring.c and virtio.c
slightly more similar.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

VirtQueueElement is allocated in vring_pop() so it seems to make sense
that vring_push() should free it.  Alas, virtio-blk frees
VirtQueueElement itself in virtio_blk_free_request().

This patch solves a double-free assertion in glib's g_slice_free().

Rename vring_free_element() to vring_unmap_element() since it no longer
frees the VirtQueueElement.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Propagate the error return value from get_indirect().  This bug was
introduced in commit 4d684832 ("vring: create a common function to parse
descriptors").
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

When the dataplane thread stops, its vring.c implementation synchronizes
vring state back to virtio.c so we can continue emulating the virtio
device.

This patch ensures that virtio.c's signalled_used_valid flag is reset so
that we do not suppress guest notifications due to stale signalled_used
values.
Suggested-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Load the virtio.c state into vring.c when we start dataplane mode and
vice versa when stopping dataplane mode.  This patch makes it possible
to start and stop dataplane any time while the guest is running.

This will eventually allow us to go back to QEMU main loop for
bdrv_drain_all() and live migration.  In the meantime, this patch makes
the dataplane lifecycle more robust but should make no visible
difference.  It may be useful in the virtio-net dataplane effort.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Done with this script:

cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
  echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `find . -type f`

This is so that paths remain valid as files are moved.

Instead, files in hw/dataplane are referenced with the relative path.
We know they are not going to move to include/, and they are the only
include files that are in subdirectories _and_ move.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

qdev-monitor.c is the only "core qdev" file that is not used in
user-mode emulation, and it does not define anything that is used
by hardware models.  Remove it from the hw/ directory and
remove hw/qdev-monitor.h from hw/qdev.h too; this requires
some files to have some new explicitly includes.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The virtio-blk-data-plane cannot access memory using the usual QEMU
functions since it executes outside the global mutex and the memory APIs
are this time are not thread-safe.

This patch introduces a virtqueue module based on the kernel's vhost
vring code.  The trick is that we map guest memory ahead of time and
access it cheaply outside the global mutex.

Once the hardware emulation code can execute outside the global mutex it
will be possible to drop this code.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>