qbus_reset_all is unused, remove it
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Stefan Weil reported the regression caused by
ec990eb6 as follows

> The second regression also occurs with MIPS malta.
> Networking no longer works with the default pcnet nic.
>
> This is caused because the reset function for pcnet is no
> longer called during system boot. The result in an invalid
> mac address (all zero) and a non-working nic.
>
> For this second regression I still have no simple solution.
> Of course mips_malta.c should be converted to qdev which
> would fix both problems (but only for malta system emulation).

The issue is, it is assumed that all qbuses, qdeves are under
main_system_bus. But there are qbuses whose parent is NULL. So it
is necessary to trigger reset for those qbuses.
(On the other hand, if NULL is passed to qdev_create(), its parent bus
is main_system_bus.)
Ideally those buses should be moved under bus controller
device which is qdev. But it's not done yet.
So register qbus reset handler for qbus whose parent is NULL.
Reported-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: N"Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Every system should have some sort of main system bus,
so sysbus_get_default should always return a valid bus.

Without this patch, at least mipssim and malta no longer
start but raise a null pointer access exception (caused by
commit ec990eb6).

Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Using bus numbers in migration is clearly wrong as
they are guest assigned. Not really sure what the
right thing to do is, for now stick 0 in there so things
keep working for non-nested setups, add a TODO.

We also probably have to mark nested bridges as non-migrateable
until this is fixed?
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>

Avoid these warnings with GCC 4.6.0:
/src/qemu/hw/ide/ahci.c: In function 'ahci_reset_port':
/src/qemu/hw/ide/ahci.c:810:14: error: variable 'tfd' set but not used [-Werror=unused-but-set-variable]
/src/qemu/hw/ide/ahci.c: In function 'handle_cmd':
/src/qemu/hw/ide/ahci.c:1103:19: error: variable 'pr' set but not used [-Werror=unused-but-set-variable]

In the tfd variable case, fix the logic also.

CC: Alexander Graf <agraf@suse.de>
CC: Kevin Wolf <kwolf@redhat.com>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch replaces explicit bswaps with endianness hints to the
mmio layer.

CC: Alexander Graf <agraf@suse.de>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

QEMU source code with CRLF line endings
which is quite common on windows hosts
fails with current make_device_config.sh.

The awk script gets the name of the included
file with \r, so instead of pci.mak it will
search for pci.mak\r which of course does
not work.

Fix this by removing any \r.

v2:
    Avoid using sub() and \r with awk because they are unsupported
    on some platforms. Use tr to remove \r. This new solution
    improves portability and was suggested by Paolo Bonzini.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Acked-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

ledma has 0x20 bytes of registers according to OBP, and at least Solaris9
reads the 5th register which is beyond what we've mapped.  So let's setup
a flag (inspired by a previous patch from Blue Swirl) to identify ledma
from espdma, and map another 16 bytes of registers which return 0.
Signed-off-by: NBob Breuer <breuerr@mc.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Avoid this warning like other uses of setsockopt:
/src/qemu/net/socket.c: In function 'net_socket_mcast_create':
/src/qemu/net/socket.c:210: warning: passing argument 4 of 'setsockopt' from incompatible pointer type
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Acked-by: NAndreas Färber <andreas.faerber@web.de>

For some reason the carets ('^') in the QED specification disappeared.
This patch puts them back.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

In addition this adds missing braces to the function to be consistent
with the coding style.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It doesn't really make sense for functions in qcow2.c to be named
qcow_ so convert the names to match correctly.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds support for the qemu-img check command.  It also
introduces a dirty bit in the qed header to mark modified images as
needing a check.  This bit is cleared when the image file is closed
cleanly.

If an image file is opened and it has the dirty bit set, a consistency
check will run and try to fix corrupted table offsets.  These
corruptions may occur if there is power loss while an allocating write
is performed.  Once the image is fixed it opens as normal again.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch implements the read/write state machine.  Operations are
fully asynchronous and multiple operations may be active at any time.

Allocating writes lock tables to ensure metadata updates do not
interfere with each other.  If two allocating writes need to update the
same L2 table they will run sequentially.  If two allocating writes need
to update different L2 tables they will run in parallel.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds code to look up data cluster offsets in the image via
the L1/L2 tables.  The L2 tables are writethrough cached in memory for
performance (each read/write requires a lookup so it is essential to
cache the tables).

With cluster lookup code in place it is possible to implement
bdrv_is_allocated() to query the number of contiguous
allocated/unallocated clusters.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch introduces the qed on-disk layout and implements image
creation.  Later patches add read/write and other functionality.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add support to discard blocks in a raw image residing on an XFS filesystem
by calling the XFS_IOC_UNRESVSP64 ioctl to punch holes.  Support for other
hole punching mechanisms can be added when they become available.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

discard [-Cq] off len -- discards a number of bytes at a specified
offset

 discards a range of bytes from the given offset

 Example:
 'discard 512 1k' - discards 1 kilobyte from 512 bytes into the file

 Discards a segment of the currently open file.
 -C, -- report statistics in a machine parsable format
 -q, -- quite mode, do not show I/O statistics
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Support discards via the WRITE SAME command with the unmap bit set, and
tell the initiator about the support for it via the block limit and the
new thin provisioning EVPD pages.  Also fix the comment which incorrectly
describedthe block limits EVPD page.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a new bdrv_discard method to free blocks in a mapping image, and a new
drive property to set the granularity for these discard.  If no discard
granularity support is set discard support is disabled.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We register the vm change state handler in a PCI BAR map() function.
This function can be called multiple times throughout the lifetime of a
PCI IDE device.  This results in duplicate vm change state handlers
being register, none of which are ever unregistered.

Instead, register the vm change state handler in the device's init
function once and for all.

piix tested, cmd646 and via not tested.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It's an indirect call to qemu_malloc, which never returns an error.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Kevin suggested to have bdrv_img_create() return proper -errno values
on error.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The monitor command is:
snapshot_blkdev <device> [snapshot-file] [format]

Default format is qcow2. For now snapshots without a snapshot-file, eg
internal snapshots, are not supported.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch re-factors img_create() moving the code doing the actual
work into block.c where it can be shared with QEMU. This is needed to
be able to create images from QEMU to be used for live snapshots.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Call error_set_progname during the qemu-img initialization, so that error
messages printed with error_report() use the right prefix.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

ATAPI also can do ncq, so let's expose the capability.

This patch makes CD-ROM support work on Windows 7 for me.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Set SATA Mode Select to AHCI in the Address Map Register.
Signed-off-by: NSebastian Herbszt <herbszt@gmx.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch enables AHCI for all machines supporting PCI.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Every device that can do PCI should also be able to do IDE. So let's move
the IDE definitions over to pci.mak.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds an emulation layer for an ICH-9 AHCI controller. For now
this controller does not do IDE legacy emulation. It is a pure AHCI controller.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We need a PCI ID for our new AHCI adapter. I just picked an ICH-9
because that's the one in the Q35 chipset.

This patch adds a PCI ID define for an ICH-9 AHCI adapter.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds the storage sata class id.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

I modified ide_identify() to include the zero-based queue length
value in word 75, and set bit 8 in word 76 to signal NCQ support
in the identify data for AHCI SATA drives.
Signed-off-by: NRoland Elek <elek.roland@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>