Create a new "unimplemented" sysbus device, which simply accepts
all read and write accesses, and implements them as read-as-zero,
write-ignored, with logging of the access as LOG_UNIMP.

This is useful for stubbing out bits of an SoC or board model
which haven't been written yet.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1484247815-15279-3-git-send-email-peter.maydell@linaro.org

Add a comment documenting the memory map of the SoC devices and which
are not implemented.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1484247815-15279-2-git-send-email-peter.maydell@linaro.org

Add support for generating the ISS (Instruction Specific Syndrome)
for Data Abort exceptions taken from AArch32. These syndromes are
used by hypervisors for example to trap and emulate memory accesses.

This is the equivalent for AArch32 guests of the work done for AArch64
guests in commit aaa1f954.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

In the ARM ldr/str decode path, rather than directly testing
"insn & (1 << 21)" and "insn & (1 << 24)", abstract these
bits out into wbit and pbit local flags. (We will want to
do more tests against them to determine whether we need to
provide syndrome information.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

In BE32 mode, sub-word size watchpoints can fail to trigger because the
address of the access is adjusted in the opcode helpers before being
compared with the watchpoint registers.  This patch reverses the address
adjustment before performing the comparison with the help of a new CPUClass
hook.

This version of the patch augments and tidies up comments a little.
Signed-off-by: NJulian Brown <julian@codesourcery.com>
Message-id: caaf64ffc72f6ae183015337b7afdbd4b8989cb6.1484929304.git.julian@codesourcery.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Thumb-1 code has some issues in BE32 mode (as currently implemented). In
short, since bytes are swapped within words at load time for BE32
executables, this also swaps pairs of adjacent Thumb-1 instructions.

This patch un-swaps those pairs of instructions again, both for execution,
and for disassembly. (The previous version of the patch always read four
bytes in arm_read_memory_func and then extracted the proper two bytes,
in a probably misguided attempt to match the behaviour of actual hardware
as described by e.g. the ARM9TDMI TRM, section 3.3 "Endian effects for
instruction fetches". It's less complicated to just read the correct
two bytes though.)
Signed-off-by: NJulian Brown <julian@codesourcery.com>
Message-id: ca20462a044848000370318a8bd41dd0a4ed273f.1484929304.git.julian@codesourcery.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a new "cfgend" property which selects whether the CPU resets into
big-endian mode or not.  This setting affects whether we reset with
SCTLR_B (ARMv6 and earlier) or SCTLR_EE (ARMv7 and later) set.
Signed-off-by: NJulian Brown <julian@codesourcery.com>
Message-id: 11420d1c49636c1790e60578ee996e51f0f0b835.1484929304.git.julian@codesourcery.com
[PMM: use error_report_err() rather than error_report();
 move the integratorcp changes to their own patch;
 drop an unnecessary extra #include;
 rephrase commit message accordingly;
 move setting of reset_sctlr above registration of cpregs
 so it actually has an effect]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Since the integratorcp board creates the CPU object directly
rather than via cpu_arm_init(), we have to call the CPU
class parse_features() method ourselves if we want to
support the user passing features via the -cpu command
line argument as well as just the cpu name. Do so.
Signed-off-by: NJulian Brown <julian@codesourcery.com>
[PMM: split out into its own patch]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

While doing multi block SDMA transfer in routine
'sdhci_sdma_transfer_multi_blocks', the 's->fifo_buffer' starting
index 'begin' and data length 's->data_count' could end up to be same.
This could lead to an OOB access issue. Correct transfer data length
to avoid it.

Cc: qemu-stable@nongnu.org
Reported-by: NJiang Xin <jiangxin1@huawei.com>
Signed-off-by: NPrasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20170130064736.9236-1-ppandit@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This enables reboot of a guest from U-Boot and Linux.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NJoel Stanley <joel@jms.id.au>
Message-id: 1485452251-1593-3-git-send-email-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The Aspeed SoC includes a set of watchdog timers using 32-bit
decrement counters, which can be based either on the APB clock or
a 1 MHz clock.

The watchdog timer is designed to prevent system deadlock and, in
general, it should be restarted before timeout. When a timeout occurs,
different types of signals can be generated, ARM reset, SOC reset,
System reset, CPU Interrupt, external signal or boot from alternate
block. The current model only performs the system reset function as
this is used by U-Boot and Linux.
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Message-id: 1485452251-1593-2-git-send-email-clg@kaod.org
[clg: - fixed compile breakage
      - fixed io region size
      - added watchdog_perform_action() on timer expiry
      - wrote a commit log
      - merged fixes from Andrew Jeffery to scale the reload value ]
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

VMState added by this patch preserves correct
loading of the integratorcp device state.
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20170131114310.6768.79416.stgit@PASHA-ISP
[PMM: removed unnecessary minimum_version_id_old lines]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

migration/next for 20170206

# gpg: Signature made Mon 06 Feb 2017 16:13:26 GMT
# gpg:                using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* remotes/juanquintela/tags/migration/20170206:
  postcopy: Recover block devices on early failure
  Postcopy: Reset state to avoid cleanup assert
  vmstate registration: check return values
  migration: Check for ID length
  vmstate_register_with_alias_id: Take an Error **
  migration: create Migration Incoming State at init time
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Misc hppa fixes.

# gpg: Signature made Tue 07 Feb 2017 02:28:40 GMT
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC  16A4 AD12 70CC 4DD0 279B

* remotes/rth/tags/pull-hppa-20170206:
  target/hppa: Fix gdb_write_register
  target/hppa: Tidy do_cbranch
  linux-user: define correct UTS machine name for hppa
  linux-user: fix "apt-get update" on linux-user hppa
  linux-user: add hppa magic numbers in qemu-binfmt-conf.sh
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In

  commit ba78db44
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Wed Jan 25 16:14:10 2017 +0000

  make: move top level dir to end of include search path

The dir $(BUILD_DIR)/$(@D) was added to the include
path. This would sometimes point to a non-existant
directory, if the sub-dir in question did not contain
any target-independant files (eg tcg/). To deal with
this the rules.mak attempted to create the directory.

While this was succesful, it also caused accidental
creation of files in the parent of the build dir.
e.g. when building common source files into target
specific output files.

Rather than trying to workaround this, just revert
the code that attempted to mkdir the missing include
directories. Instead just turn off the compiler warning
in question as the missing dir is expected & harmless
in general.

NB: you can clean up a build directory parent that has
been filled with empty directories by commit ba78db44
using this GNU find command in that parent directory:
  find audio backends block chardev crypto disas fsdev hw io linux-user \
    migration nbd net qapi qom replay slirp target ui util \
    -type d -empty -delete
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Tested-by: NAlberto Garcia <berto@igalia.com>
[PMM: added note about how to clean up a polluted directory]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a missing break, detected by Coverity.
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Removes some dead code detected by Covarity.
Reported-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

the correct UTS machine name (as expected by systemd) is "parisc",
not "hppa".
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Message-Id: <20170126080449.28255-4-laurent@vivier.eu>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

apt-get was hanging on linux-user hppa.

strace has shown the netlink data stream was not correctly byte swapped.

It appears the fd translator function is unregistered just after it
has been registered, so the translator function is not called.

This patch removes the fd_trans_unregister() after the do_socket()
in the TARGET_NR_socket case.

This fd_trans_unregister() was added by commit
    e36800c9 linux-user: add signalfd/signalfd4 syscalls
when do_socket() was not registering any fd translator.
And as now it is, we must remove this fd_trans_unregister() to keep them.
Reported-by: NJohn Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Tested-by: NJohn Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Message-Id: <20170126080449.28255-3-laurent@vivier.eu>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

As we have now a linux-user HPPA target, we can add it to the list of
supported targets in qemu-binfmt-conf.sh
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <20170126080449.28255-2-laurent@vivier.eu>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

An early postcopy failure can be recovered from as long as we know
we haven't sent the command to run the destination.
We have to undo the bdrv_inactivate_all by calling
bdrv_invalidate_cache_all

Note that I'm not using ms->block_inactive because once we've
sent the postcopy package we dont want anything else to try
and recover the block storage on the source; the destination
might have started writing to it.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170202155909.31784-3-dgilbert@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

On a destination host with no userfault support an incoming
postcopy would cause the state to enter ADVISE before
it realised there was no support, and because it was in ADVISE
state it would perform a cleanup at the end.  Since there
was no support the cleanup function should be unreachable,
but ends up being called and asserting.

Reset the state when we realise we have no support, thus the
cleanup doesn't happen.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170202155909.31784-2-dgilbert@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Check qdev's call to vmstate_register_with_alias_id; that gets
most of the common uses; there's hundreds of calls via vmstate_register
which could get fixed over time.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-4-dgilbert@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

The qdev id of a device can be huge if it's on the end of a chain
of bridges; in reality such chains shouldn't occur but they can
be made to by chaining PCIe bridges together.

The migration format has a number of 256 character long format
limits; check we don't hit them (we already use pstrcat/cpy but
that just protects us from buffer overruns, we fairly quickly
hit an assert).
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-3-dgilbert@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

I'll be adding an error to it in a subsequent patch.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-2-dgilbert@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1485207141-1941-3-git-send-email-quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

usb: various bugfixes, mostly xhci.

# gpg: Signature made Mon 06 Feb 2017 11:26:35 GMT
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-usb-20170206-1:
  xhci: fix event queue IRQ handling
  usb: ccid: check ccid apdu length
  xhci: guard xhci_kick_epctx against recursive calls
  xhci: don't kick in xhci_submit and xhci_fire_ctl_transfer
  xhci: rename xhci_complete_packet to xhci_try_complete_packet
  xhci: only free completed transfers
  usb: accept usb3 control requests
  usb/uas: more verbose error message
  hw/usb/dev-hid: Improve guest compatibility of usb-tablet
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The qemu xhci emulation doesn't handle the ERDP_EHB flag correctly.

When the host adapter queues a new event the ERDP_EHB flag is set.  The
flag is cleared (via w1c) by the guest when it updates the ERDP (event
ring dequeue pointer) register to notify the host adapter which events
it has fetched.

An IRQ must be raised in case the ERDP_EHB flag flips from clear to set.
If the flag is set already (which implies there are events queued up
which are not yet processed by the guest) xhci must *not* raise a IRQ.

Qemu got that wrong and raised an IRQ on every event, thereby generating
spurious interrupts in case we've queued events faster than the guest
processed them.  This patch fixes that.

With that change in place we also have to check ERDP updates, to see
whenever the guest has fetched all queued events.  In case there are
still pending events set ERDP_EHB and raise an IRQ again, to make sure
the events don't linger unseen forever.

The linux kernel driver and the microsoft windows driver (shipped with
win8+) can deal with the spurious interrupts without problems.  The
renesas windows driver (v2.1.39) which can be used on older windows
versions is quite upset though.  It does spurious ERDP updates now and
then (not every time, seems we must hit a race window for this to
happen), which in turn makes the qemu xhci emulation think the event
ring is full.  Things go south from here ...

tl;dr: This is the "fix xhci on win7" patch.

Cc: M.Cerveny@computer.org
Cc: 1373228@bugs.launchpad.net
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1486104705-13761-1-git-send-email-kraxel@redhat.com

Allow ISA to be disabled on some platforms (v3)

This makes some cleanups that are a start on allowing ISA to be
compiled out for platforms which don't use it.

I posted this series last November, and it collected a number of R-bs
and no apparent objections.  So, I've now rebased it (trivially) and
am sending a pull request in the hopes of merge.  A lot of the pieces
here don't have a clear maintainer, so I'm sending it directly to
Peter.

Notes:
  * Patch 3/3 triggers a style warning, but that's just because I'm
    moving a C++ // comment verbatim from one file to another

Changes since v2:
  * Trivial rebase

Changes since v1:
  * Fixed some silly compile errors in 3/3 exposed by some
    changes in other headers

# gpg: Signature made Mon 06 Feb 2017 01:37:50 GMT
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/isa-cleanup-20170206:
  Split ISA and sysbus versions of m48t59 device
  Allow ISA bus to be configured out
  Split serial-isa into its own config option
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

CCID device emulator uses Application Protocol Data Units(APDU)
to exchange command and responses to and from the host.
The length in these units couldn't be greater than 65536. Add
check to ensure the same. It'd also avoid potential integer
overflow in emulated_apdu_from_guest.
Reported-by: NLi Qiang <liqiang6-s@360.cn>
Signed-off-by: NPrasad J Pandit <pjp@fedoraproject.org>
Message-id: 20170202192228.10847-1-ppandit@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Track xhci_kick_epctx processing being active in a variable.  Check the
variable before calling xhci_kick_epctx from xhci_kick_ep.  Add an
assert to make sure we don't call recursively into xhci_kick_epctx.

Cc: 1653384@bugs.launchpad.net
Fixes: 94b037f2Reported-by: NFabian Lesniak <fabian@lesniak-it.de>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1486035372-3621-1-git-send-email-kraxel@redhat.com
Message-id: 1485790607-31399-5-git-send-email-kraxel@redhat.com

xhci_submit and xhci_fire_ctl_transfer are is called from
xhci_kick_epctx processing loop only, so there is no need to call
xhci_kick_epctx make sure processing continues.  Also eecursive calls
into xhci_kick_epctx can cause trouble.

Drop the xhci_kick_epctx calls.

Cc: 1653384@bugs.launchpad.net
Fixes: 94b037f2Reported-by: NFabian Lesniak <fabian@lesniak-it.de>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1485790607-31399-4-git-send-email-kraxel@redhat.com

Make clear that this isn't guaranteed to actually complete the transfer,
the usb packet can still be in flight after calling that function.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1485790607-31399-3-git-send-email-kraxel@redhat.com

Most callsites check already, one was missed.

Cc: 1653384@bugs.launchpad.net
Fixes: 94b037f2Reported-by: NFabian Lesniak <fabian@lesniak-it.de>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1485790607-31399-2-git-send-email-kraxel@redhat.com

Windows 10 reportedly sends these, so accept them in case
the device in question is a superspeed (usb3) device.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1485870727-21956-2-git-send-email-kraxel@redhat.com

Print some more details in case we get a unknown
control request, to ease trouble-shooting.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1485870727-21956-1-git-send-email-kraxel@redhat.com

 1. Set bInterfaceProtocol to 0x00 for usb-tablet. This should be
    non-zero for boot protocol devices only, which the usb-tablet is not.
 2. Set the usb-tablet's usage to "mouse" in the report descriptor.

The boot protocol of 0x02 specifically confused OS X/macOS' HID driver
stack, causing it to generate additional bogus HID events with relative
motion in addition to the tablet's absolute coordinate events.

Absolute pointing devices with HID Report Descriptor usage of 0x01
(pointing) are treated by the macOS HID driver as analog sticks, and
absolute coordinates are not directly translated to absolute mouse
cursor positions. Changing it to 0x02 (mouse) fixes the problem, and
does not have any adverse effect in other operating systems and
windowing systems. (VMWare does the same thing.)
Signed-off-by: NPhil Dennis-Jordan <phil@philjordan.eu>
Message-id: 1485365075-32702-1-git-send-email-phil@philjordan.eu
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The m48t59 device supports both ISA and direct sysbus attached versions of
the device in the one .c file.  This can be awkward for some embedded
machine types which need the sysbus M48T59, but don't want to pull in the
ISA bus code and its other dependencies.

Therefore, this patch splits out the code for the ISA attached M48T59 into
its own C file.  It will be built when both CONFIG_M48T59 and
CONFIG_ISA_BUS are enabled.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Currently, the code to handle the legacy ISA bus is always included in
qemu.  However there are lots of platforms that don't include ISA legacy
devies, and quite a few that have never used ISA legacy devices at all.

This patch allows the ISA bus code to be disabled in the configuration for
platforms where it doesn't make sense.

For now, the default configs are adjusted to include ISA on all platforms
including PCI: anything with PCI can at least in principle add an i82378
PCI->ISA bridge.  Also, CONFIG_IDE_CORE which is already in pci.mak
requires ISA support.

We also explicitly enable ISA on some other non-PCI platforms which include
ISA devices: moxie, sparc and unicore32.  We may want to pare this down in
future.

The platforms that will lose ISA by default are: cris, lm32, microblazeel,
microblaze, openrisc, s390x, tricore, xtensaeb, xtensa.  As far as I can
tell none of these ever used ISA.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

At present, the core device model code for 8250-like serial ports
(serial.c) and the code for serial ports attached to ISA-style legacy IO
(serial-isa.c) are both controlled by the CONFIG_SERIAL variable.

There are lots and lots of embedded platforms that have 8250-like serial
ports but have never had anything resembling ISA legacy IO.  Therefore,
split serial-isa into its own CONFIG_SERIAL_ISA option so it can be
disabled for platforms where it's not appropriate.

For now, I enabled CONFIG_SERIAL_ISA in every default-config where
CONFIG_SERIAL is enabled, excepting microblaze, or32, and xtensa.  As best
as I can tell, those platforms never used legacy ISA, and also don't
include PCI support (which would allow connection of a PCI->ISA bridge
and/or a southbridge including legacy ISA serial ports).
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>