There is a suitable log mask for the purpose.
Signed-off-by: NAnton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Message-Id: <1487053524-18674-4-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

it's not very convenient to use the crash-information property interface,
so provide a CPU class callback to get the guest crash information, and pass
that information in the event
Signed-off-by: NAnton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Message-Id: <1487053524-18674-3-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Windows reports BSOD parameters through Hyper-V crash MSRs. This
information is very useful for initial crash analysis and thus
it would be nice to have a way to fetch it.
Signed-off-by: NAnton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Message-Id: <1487053524-18674-2-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

By commit 67a1de0d, When we perform 'git pull && make && sudo make install',
In 'make' stage a qemu-version.h.tmp will be generated. If the content of
qemu-version.h.tmp and qemu-version.h aren't consistent, The qemu-version.h.tmp
will be renamed to qemu-version.h. Because of the target FORCE, The same action
will be do again in 'make install' stage.

In 'make install' stage, If there is no qemu-version.h.tmp exists and we run
'make install' with sudo, The owner and group of new qemu-version.h.tmp will be
privileged user/group. When we run 'make' next time, qemu-version.h.tmp can't
be overwritten because of permission issue.

This patch removed qemu-version.h.tmp after build to fix this issue.
Signed-off-by: NLin Ma <lma@suse.com>
Message-Id: <20170215024030.23895-1-lma@suse.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

At the Qemu initialization, we call the cpu_synchronize_all_post_init()
to synchronize All CPU states to KVM in the ./vl.c::main().

Currently, it is called before we initialize the CPUs, which is created
by "-device" command and parsed by generic devices initialization, So,
these CPUs may be ignored to synchronize.

The patch moves the cpu_synchronize_all_post_init func after generic
devices initialization to make sure that all the CPUs can be included.
Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Message-Id: <1485916178-17838-1-git-send-email-douly.fnst@cn.fujitsu.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Socket activation (sometimes known as systemd socket activation)
allows an Internet superserver to pass a pre-opened listening socket
to the process, instead of having qemu-nbd open a socket itself.  This
is done via the LISTEN_FDS and LISTEN_PID environment variables, and a
standard file descriptor range.

This change partially implements socket activation for qemu-nbd.  If
the environment variables are set correctly, then socket activation
will happen automatically, otherwise everything works as before.  The
limitation is that LISTEN_FDS must be 1.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Message-Id: <20170204100317.32425-2-rjones@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The QEMU manual page states that Cirrus Logic is the default video
card if the user doesn't specify any. However this is not true since
QEMU 2.2.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Message-Id: <20170127094154.19778-1-berto@igalia.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reorganize the sigsetjmp so that the restart case falls through
to cpu_handle_exception and the execution loop.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The sigsetjmp only needs to be prepared once for the whole execution
of cpu_exec.  This patch takes care of the "== 0" side, using a
nested loop so that cpu_handle_interrupt goes straight back to
cpu_handle_exception without doing another sigsetjmp.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The siglongjmp goes straight back to the beginning of cpu_exec's
outermost loop.  We do not need a siglongjmp, we can simply
leave the inner TB execution loop.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This seems to have worked just fine so far on weakly-ordered
architectures, but I don't see anything that prevents the
reordering from:

    store 1 to exit_request
    store 1 to tcg_exit_req
                                 load tcg_exit_req
                                 store 0 to tcg_exit_req
                                 load exit_request
                                 store 0 to exit_request
    store 1 to exit_request
    store 1 to tcg_exit_req

to this:

    store 1 to exit_request
    store 1 to tcg_exit_req
                                 load tcg_exit_req
                                 load exit_request
    store 1 to exit_request
    store 1 to tcg_exit_req
                                 store 0 to tcg_exit_req
                                 store 0 to exit_request

therefore losing a request.  It's possible that other memory barriers
(e.g. in rcu_read_unlock) are hiding it, but better safe than
sorry.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When icount is active, tb_add_jump is surprisingly called with an
out of bounds basic block index.  I have no idea how that can work,
but it does not seem like a good idea.  Clear *last_tb for all
TB_EXIT_ICOUNT_EXPIRED cases, even when all you have to do is
refill icount_extra.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use type_init() etc. to adapt the ColdFire UART
to the latest QEMU device conventions.
Signed-off-by: NThomas Huth <huth@tuxfamily.org>
Message-Id: <1485586582-6490-1-git-send-email-huth@tuxfamily.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When GDB issues a "vCont", QEMU was not handling it correctly when
multiple VCPUs are active.
For vCont, for each thread (VCPU), it can be specified whether to
single step, continue or stop that thread. The default is to stop a
thread.
However, when (for example) "vCont;s:2" is issued, all VCPUs continue
to run, although all but VCPU nr 2 are to be stopped.

This patch completely rewrites the vCont parsing code.

Please note that this improvement only works in system emulation mode,
when in userspace emulation mode the old behaviour is preserved.
Signed-off-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1487092068-16562-3-git-send-email-imbrenda@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch:

* moves vm_start to cpus.c.
* exports qemu_vmstop_requested, since it's needed by vm_start.
* extracts vm_prepare_start from vm_start; it does what vm_start did,
  except restarting the cpus.
* vm_start now calls vm_prepare_start and then restarts the cpus.
Signed-off-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1487092068-16562-2-git-send-email-imbrenda@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When a serial port writes data to a pty that's disconnected, drop the
data and return the length dropped. This avoids triggering pointless
retries in callers like the 16550A serial_xmit(), and causes
qemu_chr_fe_write() to write all data to the log file, rather than
logging only while a pty client like virsh console happens to be
connected.
Signed-off-by: NEd Swierk <eswierk@skyportsystems.com>
Message-Id: <1485870329-79428-1-git-send-email-eswierk@skyportsystems.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch adds call to apic_reset_irq_delivered when the virtual
machine is reset.
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170131114054.276.62201.stgit@PASHA-ISP>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Socket backend read handler should normally perform a disconnect, however
the read handler may not get a chance to run if the frontend is not ready
(qemu_chr_be_can_write() == 0).

This means that in virtio-serial frontend case if
 - the host has disconnected (giving EPIPE on socket write)
 - and the guest has disconnected (-> frontend not ready -> backend
   will not read)
 - and there is still data (frontend->backend) to flush (has to be a really
   tricky timing but nevertheless, we have observed the case in production)

This results in virtio-serial trying to flush this data continiously forming
a busy loop.

Solution: react on write error in the socket write handler.
errno is not reliable after qio_channel_writev_full(), so we may not get
the exact EPIPE, so disconnect on any error but QIO_CHANNEL_ERR_BLOCK which
io_channel_send_full() converts to errno EAGAIN.
We must not disconnect right away though, there still may be data to read
(see 4bf1cb03).
Signed-off-by: NAnton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Daniel P. Berrange <berrange@redhat.com>
CC: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1486045589-8074-1-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The function is not needed anymore now that migration is built on
top of QIOChannel.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1486106298-3699-4-git-send-email-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It should be 0x20, rather than 0x11.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1486106298-3699-3-git-send-email-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When we do "info ioapic" for kvm ioapic, we were building up a temporary
ioapic object. Let's fetch the real one and update correspond to the
real object as well.

This fixes printing uninitialized version field in
ioapic_print_redtbl().
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <1486106298-3699-2-git-send-email-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Queued openrisc patches

# gpg: Signature made Mon 13 Feb 2017 21:21:03 GMT
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC  16A4 AD12 70CC 4DD0 279B

* remotes/rth/tags/pull-or-20170214: (24 commits)
  target/openrisc: Optimize for r0 being zero
  target/openrisc: Tidy handling of delayed branches
  target/openrisc: Tidy ppc/npc implementation
  target/openrisc: Optimize l.jal to next
  target/openrisc: Fix madd
  target/openrisc: Implement muld, muldu, macu, msbu
  target/openrisc: Represent MACHI:MACLO as a single unit
  target/openrisc: Implement msync
  target/openrisc: Enable trap, csync, msync, psync for user mode
  target/openrisc: Set flags on helpers
  target/openrisc: Use movcond where appropriate
  target/openrisc: Keep SR_CY and SR_OV in a separate variables
  target/openrisc: Keep SR_F in a separate variable
  target/openrisc: Invert the decoding in dec_calc
  target/openrisc: Put SR[OVE] in TB flags
  target/openrisc: Streamline arithmetic and OVE
  target/openrisc: Rationalize immediate extraction
  target/openrisc: Tidy insn dumping
  target/openrisc: Implement lwa, swa
  target/openrisc: Fix exception handling status registers
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The HW does not special-case r0, but the ABI specifies that r0 should
contain 0.  If we expose this fact to the optimizer, we can simplify
a lot of the generated code.  We must of course verify that r0==0, but
that is trivial to do with a TB flag.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

The NPC SPR is really only supposed to be used for FPGA debugging.
It contains the same contents as PC, unless one plays games.  Follow
the or1ksim implementation in flushing delayed branch state when it
is changed.

The PPC SPR need not be updated every instruction, merely when we
exit the TB or attempt to read its contents.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This allows the tcg optimizer to see, and fold, all of the
constants involved in a GOT base register load sequence.
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Note that the specification for lf.madd.s is confused.  It's
the only mention of supposed FPMADDHI/FPMADDLO special registers.
On the other hand, or1ksim implements a somewhat normal non-fused
multiply and add.  Mirror that.
Reviewed-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Significantly simplifies the implementation of the use of MAC.
Reviewed-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Not documented as disabled for user mode.
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This significantly streamlines carry and overflow production.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This avoids having to keep merging and extracting the flag from SR.
Reviewed-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Decoding the opcodes in the right order reduces by 100+ lines.
Also, it happens to put the opcodes in the same order as Chapter 17.
Reviewed-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Removes a call at execution time for overflow exceptions.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Fix incorrect overflow calculation.  Move overflow exception check
to a helper function, to eliminate inline branches.  Remove some
incorrect special casing of R0.  Implement multiply inline.
Reviewed-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

The architecture manual is consistent in using "I" for signed
fields and "K" for unsigned fields.  Mirror that.
Reviewed-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: NRichard Henderson <rth@twiddle.net>