The Win32 implementation will only accept EventNotifiers, thus a few
drivers are disabled under Windows.  EventNotifiers are a good match
for the GSource implementation, too, because the Win32 port of glib
allows to place their HANDLEs in a GPollFD.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This adds to aio.c a platform-independent API based on EventNotifiers, that
can be used by both POSIX and Win32.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This removes the dependency of cutils.c on iov.c, and lets us remove
iov.o from several builds.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Adding an NBD server inside QEMU is trivial, since all the logic is
in nbd.c and can be shared easily between qemu-nbd and QEMU itself.
The main difference is that qemu-nbd serves a single unnamed export,
while QEMU serves named exports.
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The first user of close notifiers will be the embedded NBD server.
It would be possible to use them to do some of the ad hoc processing
(e.g. for block jobs and I/O limits) that is currently done by
bdrv_close.
Acked-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We need them because qemu-sockets will soon be using SocketAddress.
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The entries for libhw* are no longer needed in .gitignore.

There is also no longer a difference between common-obj-y and
hw-obj-y, so one of those two macros is sufficient.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a new URI parsing library to QEMU. The code has been borrowed from
libxml2 and libvirt.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Adding basic options to the configure script to use libseccomp or not.
The default is set to 'no'. If the flag --enable-libseccomp is used, the
script will check for its existence using pkg-config.
Signed-off-by: NEduardo Otubo <otubo@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2:
 - As I removed all the code related to seccomp from vl.c, I created
   qemu-seccomp.[ch].
 - Also making the configure script to add the specific line to
   Makefile.obj in order to compile with appropriate support to seccomp.

v2 -> v3:
 - Removing the line from Makefile.obj and adding it to Makefile.objs.
 - Marking libseccomp default option to 'yes' in the configure script.

v3 -> v8:
 - fix configure probe if libseccomp isn't available (aliguori)

IMPORTANT: this BREAKS qemu-ga compatibility for the error response.

Instead of returning something like:

{ "error": { "class": "InvalidParameterValue",
             "data": {"name": "mode", "expected": "halt|powerdown|reboot" } } }

qemu-ga now returns:

 { "error": { "class": "GenericError",
              "desc": "Parameter 'mode' expects halt|powerdown|reboot" } }

Notice that this is also a bug fix, as qemu-ga wasn't returning the
human message.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Add MRU page cache mechanism.
The page are accessed by their address.
Signed-off-by: NBenoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: NPetter Svard <petters@cs.umu.se>
Signed-off-by: NAidan Shribman <aidan.shribman@sap.com>
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Move logging functions from exec.c to qemu-log.c,
compile it only once.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch combines two functions into one, and replaces
the implementation with already existing iov_memset() from
iov.c.

The new prototype of qemu_iovec_memset():
  size_t qemu_iovec_memset(qiov, size_t offset, int fillc, size_t bytes)
It is different from former qemu_iovec_memset_skip(), and
I want to make other functions to be consistent with it
too: first how much to skip, second what, and 3rd how many
of it.  It also returns actual number of bytes filled in,
which may be less than the requested `bytes' if qiov is
smaller than offset+bytes, in the same way iov_memset()
does.

While at it, use utility function iov_memset() from
iov.h in posix-aio-compat.c, where qiov was used.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This reverts commit 25f27a4f
because of bsd-user breakage.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

There is no difference in oslib-obj-y between user-mode and system
targets.  There used to be when user-mode could optionally be
compiled with PIE.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Build vscclient from toplevel Makefile, limit usage of vpath.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

After this patch, the libhw* directories will have a hierarchy
that mimics the source tree.  This is useful because we do have
a couple of files there that are in the top source directory.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch starts converting the hw/ directory.  Some files in hw/
are compiled once, some twice (32-/64-bit), some once per target.
Each category is moved in a separate patch.

After this patch, the files that are compiled once will show the
same hierarchy in the build tree as they do in the source tree,
for example hw/qdev.o instead of just qdev.o.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

qom/ already used a separate makefile.  Convert it to use relative
paths, and make it declare both common-obj-y and user-obj-y.  This
way, the upper makefiles do not need to know that some QOM files
are compiled twice.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

At this point we will start adding nesting behavior to other files
than Makefile.target.  Because Makefile.objs is included by
Makefile.target, it is simpler to move the processing of
subdirectories there.

To enable this, only add per-target files to obj-y.  Use a separate
variable for the linker dependencies, all-obj-y.  This variable includes
obj-y and also all objects that are taken from other directories.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

The tracetool script is written in shell and has hit several portability
problems due to shell quirks or external tools across host platforms.
Additionally the amount of string processing and lack of real data
structures makes it tough to implement code generator backends for
tracers that are more complex.

This patch replaces the shell version of tracetool with a Python
version.  The new tracetool design is:

  scripts/tracetool.py - top-level script
  scripts/tracetool/backend/ - tracer backends live here (simple, ust)
  scripts/tracetool/format/  - output formats live here (.c, .h)

There is common code for trace-events definition parsing so that
backends can focus on generating code rather than parsing input.

Support for all existing backends (nop, stderr, simple, ust,
and dtrace) is added back in follow-up patches.

[Commit description written by Stefan Hajnoczi]
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Because binutils disassembler is based on libopcode, this is a rewrite from
scratch.
Signed-off-by: NMichael Walle <michael@walle.cc>

The idea behind qtest is pretty simple.  Instead of executing a CPU via TCG or
KVM, rely on an external process to send events to the device model that the CPU
would normally generate.

qtest presents itself as an accelerator.  In addition, a new option is added to
establish a qtest server (-qtest) that takes a character device.  This is what
allows the external process to send CPU events to the device model.

qtest uses a simple line based protocol to send the events.  Documentation of
that protocol is in qtest.c.

I considered reusing the monitor for this job.  Adding interrupts would be a bit
difficult.  In addition, logging would also be difficult.

qtest has extensive logging support.  All protocol commands are logged with
time stamps using a new command line option (-qtest-log).  Logging is important
since ultimately, this is a feature for debugging.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This adds support for a standard pci to pci bridge,
enabling support for more than 32 PCI devices in the system.
Device hotplug is supported by means of SHPC controller.
For guests with an SHPC driver, this allows robust hotplug
and even hotplug of nested bridges, up to 31 devices
per bridge.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This capability makes it possible for the guest to
report a unique chassis identifier to the user.

The spec also recommends making chassis indentifier
persist in eeprom.
This isn't implemented.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This adds support for SHPC interface, as defined by PCI Standard
Hot-Plug Controller and Subsystem Specification, Rev 1.0
http://www.pcisig.com/specifications/conventional/pci_hot_plug/SHPC_10

Only SHPC intergrated with a PCI-to-PCI bridge is supported,
SHPC integrated with a host bridge would need more work.

All main SHPC features are supported:
- MRL sensor
- Attention button
- Attention indicator
- Power indicator

Wake on hotplug and serr generation are stubbed out but unused
as we don't have interfaces to generate these events ATM.

One issue that isn't completely resolved is that qemu currently
expects an "eject" interface, which SHPC does not provide: it merely
removes the power to device and it's up to the user to remove the device
from slot. This patch works around that by ejecting the device
when power is removed and power LED goes off.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>