This is a mostly-mechanical conversion that creates a new flat
union 'Netdev' QAPI type that covers all the branches of the
former 'NetClientOptions' simple union, where the branches are
now listed in a new 'NetClientDriver' enum rather than generated
from the simple union.  The existence of a flat union has no
change to the command line syntax accepted for new code, and
will make it possible for a future patch to switch the QMP
command to parse a boxed union for no change to valid QMP; but
it does have some ripple effect on the C code when dealing with
the new types.

While making the conversion, note that the 'NetLegacy' type
remains unchanged: it applies only to legacy command line options,
and will not be ported to QMP, so it should remain a wrapper
around a simple union; to avoid confusion, the type named
'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions'
in its place.  Then, in the C code, we convert from NetLegacy to
Netdev as soon as possible, so that the bulk of the net stack
only has to deal with one QAPI type, not two.  Note that since
the old legacy code always rejected 'hubport', we can just omit
that branch from the new 'NetLegacyOptions' simple union.

Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>:
Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com>
although the sed script in that patch no longer applies due to
other changes in the tree since then, and I also did some manual
cleanups (such as fixing whitespace to keep checkpatch happy).
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
[Fixup from Eric squashed in]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Now that we can support boxed commands, use it to greatly
reduce the number of parameters (and likelihood of getting
out of sync) when adjusting drive-mirror parameters.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Message-Id: <1468535878-3760-1-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Now that we can support boxed commands, use it to greatly
reduce the number of parameters (and likelihood of getting
out of sync) when adjusting throttle parameters.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Message-Id: <1468468228-27827-11-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Turn on the ability to pass command and event arguments in
a single boxed parameter, which must name a non-empty type
(although the type can be a struct with all optional members).
For structs, it makes it possible to pass a single qapi type
instead of a breakout of all struct members (useful if the
arguments are already in a struct or if the number of members
is large); for other complex types, it is now possible to use
a union or alternate as the data for a command or event.

The empty type may be technically feasible if needed down the
road, but it's easier to forbid it now and relax things to allow
it later, than it is to allow it now and have to special case
how the generated 'q_empty' type is handled (see commit 7ce106a9
for reasons why nothing is generated for the empty type).  An
alternate type is never considered empty, but now that a boxed
type can be either an object or an alternate, we have to provide
a trivial QAPISchemaAlternateType.is_empty().  The new call to
arg_type.is_empty() during QAPISchemaCommand.check() requires
that we first check the type in question; but there is no chance
of introducing a cycle since objects do not refer back to commands.

We still have a split in syntax checking between ad-hoc parsing
up front (merely validates that 'boxed' has a sane value) and
during .check() methods (if 'boxed' is set, then 'data' must name
a non-empty user-defined type).

Generated code is unchanged, as long as no client uses the
new feature.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-10-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
[Test files renamed to *-boxed-*]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

The next patch will add support for passing a qapi union type
as the 'data' of a command.  But to do that, the user function
for implementing the command, as called by the generated
marshal command, must take the corresponding C struct as a
single boxed pointer, rather than a breakdown into one
parameter per member.  Even without a union, being able to use
a C struct rather than a list of parameters can make it much
easier to handle coding with QAPI.

This patch adds the internal plumbing of a 'boxed' flag
associated with each command and event.  In several cases,
this means adding indentation, with one new dead branch and
the remaining branch being the original code more deeply
nested; this was done so that the new implementation in the
next patch is easier to review without also being mixed with
indentation changes.

For this patch, no behavior or generated output changes, other
than the testsuite outputting the value of the new flag
(always False for now).
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-9-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
[Identifier box renamed to boxed in two places]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Commit 7ce106a9 documented why we don't generated a visit_type_FOO()
for implicit types; and therefore events with an anonymous type for
'data' have to open-code a visit.  Note that the open-coded visit in
qapi-event.c is slightly different from what is done in
qapi-visit.c for normal types, in part because we don't have to
check for *obj being NULL or free things on error.  But where the
type is not implicit, it is nicer to reuse the normal visit instead
of open-coding a duplicate.

At the moment, the only event with a non-implicit 'data' is in the
testsuite, where test-qapi-event.c changes as follows:

|@@ -155,6 +155,7 @@ void qapi_event_send___org_qemu_x_event(
|     __org_qemu_x_Struct param = {
|         __org_qemu_x_member1, (char *)__org_qemu_x_member2, has_q_wchar_t, q_wchar_t
|     };
|+    __org_qemu_x_Struct *arg = &param;
|
|     emit = qmp_event_get_func_emit();
|     if (!emit) {
|@@ -164,16 +165,7 @@ void qapi_event_send___org_qemu_x_event(
|     qmp = qmp_event_build_dict("__ORG.QEMU_X-EVENT");
|
|     v = qmp_output_visitor_new(&obj);
|-
|-    visit_start_struct(v, "__ORG.QEMU_X-EVENT", NULL, 0, &err);
|-    if (err) {
|-        goto out;
|-    }
|-    visit_type___org_qemu_x_Struct_members(v, &param, &err);
|-    if (!err) {
|-    if (!err) {
|-        visit_check_struct(v, &err);
|-    }
|-    visit_end_struct(v, NULL);
|+    visit_type___org_qemu_x_Struct(v, "__ORG.QEMU_X-EVENT", &arg, &err);
|     if (err) {
|         goto out;
|     }
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-8-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Ever since commit 12f254fd removed the last parameterization
of gen_err_check(), it no longer makes sense to hide the three
lines of generated C code behind a macro call. Just inline it
into the remaining users.

No change to generated code.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-7-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

In the near future, we want to lift our artificial restriction of
no variants at the top level of an event, at which point the
currently open-coded check for empty members will become
insufficient.  Factor it out into a new helper method is_empty()
now, and future-proof it by checking variants, too, along with an
assert that it is not used prior to the completion of .check().
Update places that were checking for (non-)empty .members to use
the new helper.

All of the current callers assert that there are no variants (either
directly, or by qapi.py asserting that base types have no variants),
so this is not a semantic change.

No change to generated code.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-6-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Clean up the only remaining external use of the tag_name field of
QAPISchemaObjectTypeVariants, by explicitly listing the generated
'type' tag for all variants in the testsuite (you can still tell
simple unions by the -wrapper types).  Then we can mark the
tag_name field as private by adding a leading underscore to prevent
any further use.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-5-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Commit 7ce106a9 rendered QAPISchemaObjectType.c_name() redundant,
since it now does nothing more than delegate to its superclass.
However, rather than deleting it, we can restore part of the
assertion that was removed in that commit, to prove that we never
emit the empty type directly in generated code, but rather
special-case it as a built-in that makes other aspects of code
generation easier to reason about.
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-4-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

We were previously enforcing that all flat union branches were
found in the corresponding enum, but not that all enum values
were covered by branches.  The resulting generated code would
abort() if the user passes the uncovered enum value.

We don't automatically treat non-present branches in a flat
union as empty types, for symmetry with simple unions (there,
the enum type is generated from the list of all branches, so
there is no way to omit a branch but still have it be part of
the union).

A later patch will add shorthand so that branches that are empty
in flat unions can be declared as 'branch':{} instead of
'branch':'Empty', to avoid the need for an otherwise useless
explicit empty type.  [Such shorthand for simple unions is a bit
harder to justify, since we would still have to generate a
wrapper type that parses 'data':{}, rather than truly being an
empty branch with no additional siblings to the 'type' member.]
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-3-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

This way we no longer need NetClientOptions and can convert Netdev
into a flat union.
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <93ffdfed7054529635e6acb935150d95dc173a12.1441627176.git.DirtY.iCE.hu@gmail.com>

[rework net_client_init1() to pass Netdev by copying from NetdevLegacy,
rather than merging the two types - which means that we still need
NetClientOptions after all.  Rebase to qapi changes. The bulk of the
patch is mechanical, replacing 'opts' by 'netdev->opts', while
net_client_init1() takes care of converting between legacy and modern
types.]
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-2-git-send-email-eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

This saves a lot of memory compared to a statically-sized array,
or at least 24kb could be considered a lot on an Atari ST.
It also makes the code more similar to QmpOutputVisitor.

This removes the limit on the depth of a QObject that can be processed
into a QAPI tree.  This is not a problem because QObjects can be
considered trusted; the text received on the QMP wire is untrusted
input, but the JSON parser already takes pains to limit the QObject tree
it creates.  We don't need the QMP input visitor to limit it again.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <1467906798-5312-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
[Commit message typo fixed]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

This saves a little memory compared to the doubly-linked QTAILQ.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <1467906798-5312-2-git-send-email-pbonzini@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
[Comment tweaked to avoid long line]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

# gpg: Signature made Mon 18 Jul 2016 22:59:55 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
  trace: Add QAPI/QMP interfaces to query and control per-vCPU tracing state
  trace: Allow event name pattern in "info trace-events"
  trace: Conditionally trace events based on their per-vCPU state
  trace: Add per-vCPU tracing states for events with the 'vcpu' property
  trace: Cosmetic changes on fast-path tracing
  disas: Remove unused macro '_'
  trace: Identify events with the 'vcpu' property
  trace: [bsd-user] Commandline arguments to control tracing
  trace: [linux-user] Commandline arguments to control tracing
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

VFIO update 2016-07-18

One fix for 2.7-rc0 which hides the ARI extended capability, fixing
multifunction support in PCIe configurations where the assigned device
function topology does not match the host (Alex Williamson)

# gpg: Signature made Mon 18 Jul 2016 18:02:27 BST
# gpg:                using RSA key 0x239B9B6E3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg:                 aka "Alex Williamson <alex@shazbot.org>"
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>"
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>"
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B  8A90 239B 9B6E 3BB0 8B22

* remotes/awilliam/tags/vfio-update-20160718.0:
  vfio/pci: Hide ARI capability
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Homogenizes the command capabilities with QMP.
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Events with the 'vcpu' property are conditionally emitted according to
their per-vCPU state. Other events are emitted normally based on their
global tracing state.

Note that the per-vCPU condition check applies to all tracing backends.
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic
tracing state of events with the 'vcpu' property.
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Eliminates a future compilation error when UI code includes the tracing
headers (indirectly pulling "disas/bfd.h" through "qom/cpu.h") and
GLib's i18n '_' macro.
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

A new event attribute 'cpu_id' is added to have a separate ID
space ('TRACE_VCPU_*') for all events with the 'vcpu' property.

These are later used to identify which events are enabled on each vCPU.
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed.  This type is also
returned by trace_opt_parse() and used in vl.c.

Also fixed coding style on for(;;) and else statement as suggested by
Eric Blake <eblake@redhat.com> since the patch modifies these lines or
close enough.
--Stefan]
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146860252322.30668.18276041739086338328.stgit@fimbulvetr.bsc.es
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

[Changed const char *trace_file to char *trace_file since it's a
heap-allocated string that needs to be freed.  This type is also
returned by trace_opt_parse() and used in vl.c.
--Stefan]
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146860251784.30668.17339867835129075077.stgit@fimbulvetr.bsc.es
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

# gpg: Signature made Mon 18 Jul 2016 17:58:27 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  MAINTAINERS: Add include/block/aio.h to block I/O path section
  virtio-blk: dataplane cleanup
  checkpatch: consider git extended headers valid patches
  aio-posix: remove useless parameter
  linux-aio: prevent submitting more than MAX_EVENTS
  aio_ctx_check: follow CODING_STYLE
  linux-aio: share one LinuxAioState within an AioContext
  spec/parallels: fix a mistake
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

QEMU supports ARI on downstream ports and assigned devices may support
ARI in their extended capabilities.  The endpoint ARI capability
specifies the next function, such that the OS doesn't need to walk
each possible function, however this next function is relative to the
host, not the guest.  This leads to device discovery issues when we
combine separate functions into virtual multi-function packages in a
guest.  For example, SR-IOV VFs are not enumerated by simply probing
the function address space, therefore the ARI next-function field is
zero.  When we combine multiple VFs together as a multi-function
device in the guest, the guest OS identifies ARI is enabled, relies on
this next-function field, and stops looking for additional function
after the first is found.

Long term we should expose the ARI capability to the guest to enable
configurations with more than 8 functions per slot, but this requires
additional QEMU PCI infrastructure to manage the next-function field
for multiple, otherwise independent devices.  In the short term,
hiding this capability allows equivalent functionality to what we
currently have on non-express chipsets.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>

This file is actually the header for async.c and aio-*.c., so add it to
the same section.
Suggested-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1468826387-10473-1-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

No need duplicate the judgment, there is one in function entry.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Message-id: 1468814749-14510-1-git-send-email-caoj.fnst@cn.fujitsu.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Renames look like this with git-diff(1) when diff.renames = true is set:

  diff --git a/a b/b
  similarity index 100%
  rename from a
  rename to b

This raises the "Does not appear to be a unified-diff format patch"
error because checkpatch.pl only considers a diff valid if it contains
at least one "@@" hunk.

This patch accepts renames and copies too so that checkpatch.pl exits
successfully when a diff only renames/copies files.  The git diff
extended header format is described on the git-diff(1) man page.
Reported-by: NColin Lord <clord@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1468576014-28788-1-git-send-email-stefanha@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Parameter **errp of aio_context_setup() is useless, remove it
and clean up the related code.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1468578524-23433-1-git-send-email-caoj.fnst@cn.fujitsu.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Invoking io_setup(MAX_EVENTS) we ask kernel to create ring buffer for us
with specified number of events.  But kernel ring buffer allocation logic
is a bit tricky (ring buffer is page size aligned + some percpu allocation
are required) so eventually more than requested events number is allocated.

From a userspace side we have to follow the convention and should not try
to io_submit() more or logic, which consumes completed events, should be
changed accordingly.  The pitfall is in the following sequence:

    MAX_EVENTS = 128
    io_setup(MAX_EVENTS)

    io_submit(MAX_EVENTS)
    io_submit(MAX_EVENTS)

    /* now 256 events are in-flight */

    io_getevents(MAX_EVENTS) = 128

    /* we can handle only 128 events at once, to be sure
     * that nothing is pended the io_getevents(MAX_EVENTS)
     * call must be invoked once more or hang will happen. */

To prevent the hang or reiteration of io_getevents() call this patch
restricts the number of in-flights, which is now limited to MAX_EVENTS.
Signed-off-by: NRoman Pen <roman.penyaev@profitbricks.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468415004-31755-1-git-send-email-roman.penyaev@profitbricks.com
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

replace tab with spaces
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Message-id: 1468501843-14927-1-git-send-email-caoj.fnst@cn.fujitsu.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This has better performance because it executes fewer system calls
and does not use a bottom half per disk.

Originally proposed by Ming Lei.

[Changed #include "raw-aio.h" to "block/raw-aio.h" in win32-aio.c to fix
build error as reported by Peter Maydell <peter.maydell@linaro.org>.
--Stefan]
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1467650000-51385-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

squash! linux-aio: share one LinuxAioState within an AioContext

We have only one flag for now - Empty Image flag. The patch fixes unused
bits specification and marks bit 1 as usused.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

ppc patch queue 2016-07-18

Here's what ought to be the final ppc pull request before the 2.7 hard
freeze.  This set contains a rework of the DBDMA device for Mac
platforms, and some assorted cleanups and bugfixes.

# gpg: Signature made Mon 18 Jul 2016 05:35:27 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.7-20160718:
  ppc: Yet another fix for the huge page support detection mechanism
  target-ppc: fix left shift overflow in hpte_page_shift
  ppc/mmu-hash64: Remove duplicated #include statement
  ppc: abort if compat property contains an unknown value
  spapr: Ensure CPU cores are added contiguously and removed in LIFO order
  vfio/spapr: Remove stale ioctl() call
  ppc: Fix support for odd MSR combinations
  dbdma: reset io->processing flag for unassigned DBDMA channel rw accesses
  dbdma: set FLUSH bit upon reception of flush command for unassigned DBDMA channels
  dbdma: fix load_word/store_word value endianness
  dbdma: fix endian of DBDMA_CMDPTR_LO during branch
  dbdma: add per-channel debugging enabled via DEBUG_DBDMA_CHANMASK
  dbdma: always define DBDMA_DPRINTF and enable debug with DEBUG_DBDMA
  spapr: fix core unplug crash
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit 86b50f2e ("Disable huge page support if it is not available
for main RAM") already made sure that huge page support is not announced
to the guest if the normal RAM of non-NUMA configurations is not backed
by a huge page filesystem. However, there is one more case that can go
wrong: NUMA is enabled, but the RAM of the NUMA nodes are not configured
with huge page support (and only the memory of a DIMM is configured with
it). When QEMU is started with the following command line for example,
the Linux guest currently crashes because it is trying to use huge pages
on a memory region that does not support huge pages:

 qemu-system-ppc64 -enable-kvm ... -m 1G,slots=4,maxmem=32G -object \
   memory-backend-file,policy=default,mem-path=/hugepages,size=1G,id=mem-mem1 \
   -device pc-dimm,id=dimm-mem1,memdev=mem-mem1 -smp 2 \
   -numa node,nodeid=0 -numa node,nodeid=1

To fix this issue, we've got to make sure to disable huge page support,
too, when there is a NUMA node that is not using a memory backend with
huge page support.

Fixes: 86b50f2eSigned-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

ps->pte_enc is a 32-bit value, which is shifted left and then compared
to a 64-bit value.  It needs a cast before the shift.

Reported by Coverity.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

No need to include error-report.h twice here.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

It is not possible to set the compat property to an unknown value with
powerpc_set_compat(). Something must have gone terribly wrong in QEMU,
if we detect an "Internal error" in powerpc_get_compat(). Let's abort then.

This patch also drops the "max_compat ? *max_compat : -1" construct. It is
useless since max_compat is dereferenced a few lines above.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>