The header file was introduced by fbcc3e50 ("qemu-thread: optimize QemuLockCnt
with futexes on Linux", 2017-01-16) without header guards. Add them.
Signed-off-by: NEmilio G. Cota <cota@braap.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

vte_terminal_copy_clipboard() is deprecated in VTE 0.50.
Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

test introduced in 382176b4Signed-off-by: NCarlo Marcelo Arenas Belón <carenas@gmail.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

likely introduced in 3532fa74Signed-off-by: NCarlo Marcelo Arenas Belón <carenas@gmail.com>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Remove trailing whitespace in qemu-doc.texi, as it causes
reproducibility issues depending on the echo implementation
used by the Makefile.
Reported-By: NVagrant Cascadian <vagrant@debian.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

pc, pci, virtio: fixes, features

A bunch of fixes all over the place.
A new vmcore device - the user interface around it is still somewhat
controversial, but I feel most of the code is fine, suggestions can be
addressed by adding patches on top.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 15 Oct 2017 04:02:23 BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (26 commits)
  tests/pxe: Test more NICs when running in SPEED=slow mode
  pc: remove useless hot_add_cpu initialisation
  isapc: Remove unnecessary migration compatibility code
  virtio-pci: Replace modern_as with direct access to modern_bar
  virtio: fix descriptor counting in virtqueue_pop
  hw/gen_pcie_root_port: make IO RO 0 on IO disabled
  pci: Validate interfaces on base_class_init
  xen/pt: Mark TYPE_XEN_PT_DEVICE as hybrid
  pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices
  pci: Add INTERFACE_PCIE_DEVICE to all PCIe devices
  pci: Add interface names to hybrid PCI devices
  pci: conventional-pci-device and pci-express-device interfaces
  PCI: PCIe access should always be little endian
  virtio/pci/migration: Convert to VMState
  hw/pci-bridge/pcie_pci_bridge: properly handle MSI unavailability case
  pci: allow 32-bit PCI IO accesses to pass through the PCI bridge
  virtio/vhost: reset dev->log after syncing
  MAINTAINERS: add Dump maintainers
  scripts/dump-guest-memory.py: add vmcoreinfo
  kdump: set vmcoreinfo location
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

nbd patches for 2017-10-14

- Marc-André Lureau - NBD: use g_new() family of functions
- Vladimir Sementsov-Ogievskiy - first half of 00/13 nbd minimal structured read

# gpg: Signature made Sun 15 Oct 2017 01:38:47 BST
# gpg:                using RSA key 0xA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg:                 aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2017-10-14:
  nbd: header constants indenting
  nbd/server: simplify reply transmission
  nbd/server: refactor nbd_co_send_simple_reply parameters
  nbd/server: do not use NBDReply structure
  nbd/server: structurize simple reply header sending
  nbd: rename some simple-request related objects to be _simple_
  block/nbd-client: refactor nbd_co_receive_reply
  block/nbd-client: assert qiov len once in nbd_co_request
  NBD: use g_new() family of functions
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Fri 13 Oct 2017 14:49:22 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  block/throttle.c: add bdrv_co_drain_begin/end callbacks
  block: rename bdrv_co_drain to bdrv_co_drain_begin
  block: add bdrv_co_drain_end callback
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Merge tpm 2017/10/04 v3

# gpg: Signature made Fri 13 Oct 2017 12:37:07 BST
# gpg:                using RSA key 0x75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE  C66B 75AD 6580 2A0B 4211

* remotes/stefanberger/tags/pull-tpm-2017-10-04-3:
  specs: Describe the TPM support in QEMU
  tpm: Move tpm_cleanup() to right place
  tpm: Added support for TPM emulator
  tpm-passthrough: move reusable code to utils
  tpm-backend: Move realloc_buffer() implementation to tpm-tis model
  tpm-backend: Add new API to read backend TpmInfo
  tpm-backend: Made few interface methods optional
  tpm-backend: Initialize and free data members in it's own methods
  tpm-backend: Move thread handling inside TPMBackend
  tpm-backend: Remove unneeded member variable from backend class
  tpm: Use EMSGSIZE instead of EBADMSG to compile on OpenBSD
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Thu 12 Oct 2017 21:52:28 BST
# gpg:                using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* remotes/elmarco/tags/vu-pull-request:
  libvhost-user: Support VHOST_USER_SET_SLAVE_REQ_FD
  libvhost-user: Update and fix feature and request lists
  vhost-user-bridge: Only process received packets on started queues
  libvhost-user: vu_queue_started
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The pxe-test is a very good test to excercise NICs, thus we should use
it to test all NICs that can be used by the BIOS for booting via network.
However, to avoid that the default testing time increases too much, the
additional NICs are only tested in the "make check SPEED=slow" mode.

The virtio-net NIC on ppc64 is now also only tested in slow mode, since
the test on ppc64 is really quite slow and we've got test coverage for
virtio-net in big endian mode now on s390x, too.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Since 4458fb3a (pc: Eliminate pc_default_machine_options()),
hot_add_cpu is set in pc_machine_class_init(), so we don't
need to set it in pc_q35_machine_options(), pc_i440fx_machine_options()
and xenfv_machine_options(), except to clear it in
pc_i440fx_1_4_machine_opt().
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NAnthony PERARD <anthony.perard@citrix.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

We don't touch isapc when we change guest ABI and add new entries
to PC_COMPAT_* or new PCMachineClass compat flags.  This means
isapc never guaranteed guest ABI and cross-QEMU-version live
migration compatibility.  There's no point in keeping code for
kvm-pv-eoi and APIC ID compatibility in pc_init_isa().
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The modern bar is accessed now via yet another address space created just
for that purpose and it does not really need FlatView and dispatch tree
as it has a single memory region so it is just a waste of memory. Things
get even worse when there are dozens or hundreds of virtio-pci devices -
since these address spaces are global, changing any of them triggers
rebuilding all address spaces.

This replaces indirect accesses to the modern BAR with a simple lookup
and direct calls to memory_region_dispatch_read/write.

This is expected to save lots of memory at boot time after applying:
[Qemu-devel] [PULL 00/32] Misc changes for 2017-09-22
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

While changing the s/g list allocation, commit 3b3b0628
also changed the descriptor counting to count iovec entries
as split by cpu_physical_memory_map(). Previously only the
actual descriptor entries were counted and the split into
the iovec happened afterwards in virtqueue_map().
Count the entries again instead to avoid erroneous
"Looped descriptor" errors.
Reported-by: NHans Middelhoek <h.middelhoek@ospito.nl>
Link: https://forum.proxmox.com/threads/vm-crash-with-memory-hotplug.35904/
Fixes: 3b3b0628 ("virtio: slim down allocation of VirtQueueElements")
Signed-off-by: NWolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

IO_LIMIT and IO_BASE registers should not be writable if
gen_pcie_root_port's io-reserve property is set to 0.
The COMMAND register should have the IO flag read only.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Make sure we don't forget to add the Conventional PCI or PCI
Express interface names on PCI device classes in the future.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Revieed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

xen-pt doesn't set the is_express field, but is supposed to be
able to handle PCI Express devices too.  Mark it as hybrid.
Suggested-by: NJan Beulich <JBeulich@suse.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:

1) The ones that already have INTERFACE_PCIE_DEVICE set:

* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3

2) base-pci-bridge

Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:

* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge

The direct subtypes of base-pci-bridge not touched by this patch
are:

* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
  marked as PCIe-only devices.

3) megasas-base

Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.

"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".
Acked-by: NAlberto Garcia <berto@igalia.com>
Acked-by: NJohn Snow <jsnow@redhat.com>
Acked-by: NAnthony PERARD <anthony.perard@citrix.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Change all devices that set is_express=1 to implement
INTERFACE_PCIE_DEVICE.

Cc: Keith Busch <keith.busch@intel.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Dmitry Fleytman <dmitry@daynix.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: qemu-block@nongnu.org
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The following devices support both PCI Express and Conventional
PCI, by including special code to handle the QEMU_PCI_CAP_EXPRESS
flag and/or conditional pcie_endpoint_cap_init() calls:

* vfio-pci (is_express=1, but legacy PCI handled by
  vfio_populate_device())
* vmxnet3 (is_express=0, but PCIe handled by vmxnet3_realize())
* pvscsi (is_express=0, but PCIe handled by pvscsi_realize())
* virtio-pci (is_express=0, but PCIe handled by
  virtio_pci_dc_realize(), and additional legacy PCI code at
  virtio_pci_realize())
* base-xhci (is_express=1, but pcie_endpoint_cap_init() call
  is conditional on pci_bus_is_express(dev->bus)
  * Note that xhci does not clear QEMU_PCI_CAP_EXPRESS like the
    other hybrid devices

Cc: Dmitry Fleytman <dmitry@daynix.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Those two interfaces will be used to indicate which device types
support Conventional PCI or PCI Express buses.  Management
software will be able to use the qom-list-types QMP command to
query that information.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

PCIe busses are always little endian, so set the endianness of the
memory region to little endian rather than native such that operations
work as expected on big endian targets.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Convert the 'modern_state' part of virtio-pci to modern migration
macros.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

QEMU with the pcie-pci-bridge device crashes if the guest board doesn't support MSI,
e.g. 'qemu-system-ppc64 -M prep -device pcie-pci-bridge'.
This is caused by wrong pcie-pci-bridge instantiation error handling. This patch fixes this issue
by falling back to legacy INTx if MSI is not available.
Also set the bridge's 'msi' property default value to 'auto' in order to trigger errors
only when user explicitly set msi=on.
Reported-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAleksandr Bezzubikov <zuban32s@gmail.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Tested-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Whilst the underlying PCI bridge implementation supports 32-bit PCI IO
accesses, unfortunately they are truncated at the legacy 64K limit.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

vhost_log_put() is called to decomission the dirty log between qemu and
a vhost device when stopping the device. Such a call can happen from
migration_completion().

Present code sets dev->log_size to zero too early in vhost_log_put(),
causing the sync check to always return false. As a consequence, the
last pass on the dirty bitmap never happens at the end of migration.

If a vhost device was busy (writing to guest memory) until the last
moments before vhost_virtqueue_stop(), this error will result in guest
memory corruption (at least) following migrations.
Signed-off-by: NFelipe Franciosi <felipe@nutanix.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Proposing myself, since I have some familiarity with the code now.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add a vmcoreinfo ELF note in the dump if vmcoreinfo device has the
memory location details.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

kdump header provides offset and size of the vmcoreinfo content,
append it if available (skip the ELF note header).

crash-7.1.9 was the first version that started looking in the
vmcoreinfo data for phys_base instead of in the kdump_sub_header.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

If the guest note is VMCOREINFO, try to get phys_base from it.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Read the guest ELF PT_NOTE from guest memory when fw_cfg
etc/vmcoreinfo entry provides the location, and write it as an
additional note in the dump.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

See docs/specs/vmcoreinfo.txt for details.

"etc/vmcoreinfo" fw_cfg entry is added when using "-device vmcoreinfo".
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Reintroduce the write callback that was removed when write support was
removed in commit 023e3148.

Contrary to the previous callback implementation, the write_cb
callback is called whenever a write happened, so handlers must be
ready to handle partial write as necessary.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

ioh3420_interrupts_init() pass error message to local_err, then
propagate it to errp by error_propagate(), which is not necessary.
So eliminate it and pass errp directly instead of local_err.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: NMao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

On commit f8cd1b02 ("pci: Convert to realize"), no error_set*()
call was added for the pcie_chassis_add_slot() error case.
pcie_chassis_add_slot() errors get ignored, making QEMU crash
later.  e.g.:

  $ qemu-system-x86_64 -device ioh3420 -device xio3130-downstream
  qemu-system-x86_64: memory.c:2166: memory_region_del_subregion: Assertion `subregion->container == mr' failed.
  Aborted (core dumped)

Fix it by reporting the error using error_setg().

Fixes: f8cd1b02Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Prepare indenting for the following commit.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20171012095319.136610-9-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Send qiov via qio_channel_writev_all instead of calling nbd_write twice
with a cork.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171012095319.136610-8-vsementsov@virtuozzo.com>
[eblake: rebase to tweaks earlier in series]
Signed-off-by: NEric Blake <eblake@redhat.com>

Pass client and buffer (*data) parameters directly, to make the function
consistent with further structured reply sending functions.
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171012095319.136610-7-vsementsov@virtuozzo.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

NBDReply structure will be upgraded in future patches to handle both
simple and structured replies and will be used only in the client
Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171012095319.136610-6-vsementsov@virtuozzo.com>
[eblake: rebase to tweaks earlier in series]
Signed-off-by: NEric Blake <eblake@redhat.com>