Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

All of them were reported by codespell.
Most typos are in comments, one is in an error message.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NChih-Min Chao <cmchao@gmail.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NChih-Min Chao <cmchao@gmail.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NChih-Min Chao <cmchao@gmail.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

    reported by checkpatch.pl
Signed-off-by: NChih-Min Chao <cmchao@gmail.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

    don't mix tab and space. The rule is 4 spaces
Signed-off-by: NChih-Min Chao <cmchao@gmail.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Modify DPRINTF to always enable -Wformat checking.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Cast 64bit variables to int when used in DPRINTF. They only contain
32bit of data.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

- miscellaneous cleanups for TCG (Emilio) and NBD (Bogdan)
- next part in the thread-safe address_space_* saga: atomic access
  to the bounce buffer and the map_clients list, from Fam
- optional support for linking with tcmalloc, also from Fam
- reapplying Peter Crosthwaite's "Respect as_translate_internal
  length clamp" after fixing the SPARC fallout.
- build system fix from Wei Liu
- small acpi-build and ioport cleanup by myself

# gpg: Signature made Wed Apr 29 09:34:00 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (22 commits)
  nbd/trivial: fix type cast for ioctl
  translate-all: use bitmap helpers for PageDesc's bitmap
  target-i386: disable LINT0 after reset
  Makefile.target: prepend $libs_softmmu to $LIBS
  milkymist: do not modify libs-softmmu
  configure: Add support for tcmalloc
  exec: Respect as_translate_internal length clamp
  ioport: reserve the whole range of an I/O port in the AddressSpace
  ioport: loosen assertions on emulation of 16-bit ports
  ioport: remove wrong comment
  ide: there is only one data port
  gus: clean up MemoryRegionPortio
  sb16: remove useless mixer_write_indexw
  sun4m: fix slavio sysctrl and led register sizes
  acpi-build: remove dependency from ram_addr.h
  memory: add memory_region_ram_resize
  dma-helpers: Fix race condition of continue_after_map_failure and dma_aio_cancel
  exec: Notify cpu_register_map_client caller if the bounce buffer is available
  exec: Protect map_client_list with mutex
  linux-user, bsd-user: Remove two calls to cpu_exec_init_all
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Wed Apr 29 00:03:44 2015 BST using RSA key ID AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/ide-pull-request:
  qtest: Add assertion that required environment variable is set
  qtest/ahci: add flush retry test
  libqos: add blkdebug_prepare_script
  libqtest: add qmp_async
  libqtest: add qmp_eventwait
  qtest/ahci: Allow override of default CLI options
  qtest/ahci: Add simple flush test
  qtest/ahci: test different disk sectors
  qtest/ahci: add qcow2 support to ahci-test
  fdc: remove sparc sun4m mutations
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This fixes ioctl behavior on powerpc e6500 platforms with 64bit kernel and 32bit
userspace. The current type cast has no effect there and the value passed to the
kernel is still 0. Probably an issue related to the compiler, since I'm assuming
the same configuration works on a similar setup on x86.

Also ensure consistency with previous type cast in TRACE message.
Signed-off-by: NBogdan Purcareata <bogdan.purcareata@freescale.com>
Message-Id: <1428058914-32050-1-git-send-email-bogdan.purcareata@freescale.com>
Cc: qemu-stable@nongnu.org
[Fix parens as noticed by Michael. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Here we have an open-coded byte-based bitmap implementation.
Get rid of it since there's a ulong-based implementation to be
used by all code.
Signed-off-by: NEmilio G. Cota <cota@braap.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Due to old Seabios bug, QEMU reenable LINT0 after reset. This bug is long gone
and therefore this hack is no longer needed.  Since it violates the
specifications, it is removed.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Message-Id: <1428881529-29459-2-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

I discovered a problem when trying to build QEMU statically with gcc.
libm is an element of LIBS while libpixman-1 is an element in
libs_softmmu. Libpixman references functions in libm, so the original
ordering makes linking fail.

This fix is to reorder $libs_softmmu and $LIBS to make -lm appear after
-lpixman-1. However I'm not quite sure if this is the right fix, hence
the RFC tag.

Normally QEMU is built with c++ compiler which happens to link in libm
(at least this is the case with g++), so building QEMU statically
normally just works and nobody notices this issue.
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Message-Id: <1425912873-21215-1-git-send-email-wei.liu2@citrix.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is better and prepares for the next patch.  When we copy
libs_softmmu's value into LIBS with a := assignment, we cannot
anymore modify libs_softmmu in the Makefiles.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This adds "--enable-tcmalloc" and "--disable-tcmalloc" to allow linking
to libtcmalloc from gperftools.

tcmalloc is a malloc implementation that works well with threads and is
fast, so it is good for performance.

It is disabled by default, because the MALLOC_PERTURB_ flag we use in
tests doesn't work with tcmalloc. However we can enable tcmalloc
specific heap checker and profilers later.

An IOPS gain can be observed with virtio-blk-dataplane, other parts of
QEMU will directly benefit from it as well:

==========================================================
                       glibc malloc
----------------------------------------------------------
rw         bs         iodepth    bw     iops       latency
read       4k         1          150    38511      24
----------------------------------------------------------

==========================================================
                         tcmalloc
----------------------------------------------------------
rw         bs         iodepth    bw     iops       latency
read       4k         1          156    39969      23
----------------------------------------------------------
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <1427338992-27057-1-git-send-email-famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NEd Maste <emaste@freebsd.org>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1427911244-22565-1-git-send-email-emaste@freebsd.org
Signed-off-by: NJohn Snow <jsnow@redhat.com>

Signed-off-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1426018503-821-7-git-send-email-jsnow@redhat.com

Pull this helper out of ide-test and into libqos,
to be shared with ahci-test.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1426018503-821-6-git-send-email-jsnow@redhat.com

Add qmp_async, which lets us send QMP commands asynchronously.
This is useful when we want to send commands that will trigger
event responses, but we don't know in what order to expect them.

Sometimes the event responses may arrive even before the command
confirmation will show up, so it is convenient to leave the responses
in the stream.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1426018503-821-5-git-send-email-jsnow@redhat.com

Allow the user to poll until a desired interrupt occurs.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1426018503-821-4-git-send-email-jsnow@redhat.com

Signed-off-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1426018503-821-3-git-send-email-jsnow@redhat.com

Signed-off-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1426018503-821-2-git-send-email-jsnow@redhat.com

Test sector offset 0, 1, and the last sector(s)
in LBA28 and LBA48 modes.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1426274523-22661-3-git-send-email-jsnow@redhat.com

This will enable the testing of high offsets without
wasting a lot of disk space, and does not impact the
previous tests.

mkimg and mkqcow2 are added to libqos for other tests.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1426274523-22661-2-git-send-email-jsnow@redhat.com

They were introduced in 6f7e9aec and
82407d1a and lots of bug fixes were done after that.

This fixes (at least) the detection of the floppy controller on Debian 4.0r9/SPARC,
and SS-5's OBP initialization routine still works.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1426351846-6497-1-git-send-email-hpoussin@reactos.org
Signed-off-by: NJohn Snow <jsnow@redhat.com>

VFIO updates
 - Correction to BAR overflow
 - Fix error sign
 - Reset workaround for AMD Bonaire & Hawaii GPUs

# gpg: Signature made Tue Apr 28 18:26:43 2015 BST using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg:                 aka "Alex Williamson <alex@shazbot.org>"
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>"
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>"

* remotes/awilliam/tags/vfio-update-20150428.0:
  vfio-pci: Reset workaround for AMD Bonaire and Hawaii GPUs
  vfio-pci: Fix error path sign
  vfio-pci: Further fix BAR size overflow
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Somehow these GPUs manage not to respond to a PCI bus reset, removing
our primary mechanism for resetting graphics cards.  The result is
that these devices typically work well for a single VM boot.  If the
VM is rebooted or restarted, the guest driver is not able to init the
card from the dirty state, resulting in a blue screen for Windows
guests.

The workaround is to use a device specific reset.  This is not 100%
reliable though since it depends on the incoming state of the device,
but it substantially improves the usability of these devices in a VM.

Credit to Alex Deucher <alexander.deucher@amd.com> for his guidance.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

This is an impossible error path due to the fact that we're reading a
kernel provided, rather than user provided link, which will certainly
always fit in PATH_MAX.  Currently it returns a fixed 26 char path
plus %d group number, which typically maxes out at double digits.
However, the caller of the initfn certainly expects a less-than zero
return value on error, not just a non-zero value.  Therefore we
should correct the sign here.
Reported-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

In an analysis by Laszlo, the resulting type of our calculation for
the end of the MSI-X table, and thus the start of memory after the
table, is uint32_t.  We're therefore not correctly preventing the
corner case overflow that we intended to fix here where a BAR >=4G
could place the MSI-X table to end exactly at the 4G boundary.  The
MSI-X table offset is defined by the hardware spec to 32bits, so we
simply use a cast rather than changing data structure types.  This
scenario is purely theoretically, typically the MSI-X table is located
at the front of the BAR.
Reported-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Block patches

# gpg: Signature made Tue Apr 28 15:35:05 2015 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (76 commits)
  block: move I/O request processing to block/io.c
  block: extract bdrv_setup_io_funcs()
  block: add bdrv_set_dirty()/bdrv_reset_dirty() to block_int.h
  block: replace bdrv_states iteration with bdrv_next()
  vmdk: Widen before shifting 32 bit header field
  block/dmg: make it modular
  block/mirror: Always call block_job_sleep_ns()
  iotests: add incremental backup granularity tests
  iotests: add incremental backup failure recovery test
  iotests: add simple incremental backup case
  iotests: add QMP event waiting queue
  iotests: add invalid input incremental backup tests
  hbitmap: truncate tests
  block: Resize bitmaps on bdrv_truncate
  block: Ensure consistent bitmap function prototypes
  block: add BdrvDirtyBitmap documentation
  qmp: Add dirty bitmap status field in query-block
  qmp: add block-dirty-bitmap-clear
  qmp: Add support of "dirty-bitmap" sync mode for drive-backup
  block: Add bitmap successors
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The block.c file has grown to over 6000 lines.  It is time to split this
file so there are fewer conflicts and the code is easier to maintain.

Extract I/O request processing code:
 * Read
 * Write
 * Zero writes and making the image empty
 * Flush
 * Discard
 * ioctl
 * Tracked requests and queuing
 * Throttling and copy-on-read
 * Block status and allocated functions
 * Refreshing block limits
 * Reading/writing vmstate
 * qemu_blockalign() and friends

The patch simply moves code from block.c into block/io.c.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Move the code to install coroutine and aio emulation function pointers
in a BlockDriver to its own function.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The dirty bitmap functions are called from the block I/O processing
code.  Make them visible to block_int.h users so they can be used
outside block.c.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The bdrv_states list is a static variable in block.c.

bdrv_drain_all() and bdrv_flush_all() use this variable to iterate over
all drives.

The next patch will move bdrv_drain_all() and bdrv_flush_all() out of
block.c so it's necessary to switch to the public bdrv_next() interface.
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Coverity spotted this.

The field is 32 bits, but if it's possible to overflow in 32 bit
left shift.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

dmg can optionally utilize libbz2, make it modular
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The mirror block job is trying to take a clever shortcut if delay_ns is
0 and skips block_job_sleep_ns() in that case. But that function must be
called in every block job iteration, because otherwise it is for example
impossible to pause the job.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Test what happens if you fiddle with the granularity.
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-22-git-send-email-jsnow@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>