Original text below.

Attached is a patch that changes how the emulated floppy controller replies to Sense Interrupt Status commands immediately after a controller reset. The specs state that after a Reset the 82078 goes into polling mode which needs four Sense Interrupt Status commands to be issued afterwards to clear the status of each drive. Currently we always respond to Sense Interrupt Status with a SEEK END instead of POLLING. This causes a problem with the SCO Openserver installer which is expects a POLLING state after reset. This patch returns a POLLING status for four Sense Interrupt Status requests immediately after a controller reset. This approach mirrors the way Bochs handles this situation. With the attached patch applied Openserver gets further when trying to load storage drivers from the floppy disk (blocked by another issue, patch on its way). I have successfully tested the floppy drive on the following OSs after applying this patch: Windows 98, Windows XP SP2, Linux x86 (SysRescCD 1.1.3 and Ubuntu 8.10).

Justin

Changelog:

Properly handle Sense Interrupt Status after FDC Reset
Signed-off-by: NJustin Chevrier <theburner1@yahoo.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6416 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6415 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6414 c046a42c-6fe2-441c-8c8c-71466251a162

[ The following text is in the "UTF-8" character set. ]

    [ Your display is set for the "koi8-r" character set.  ]

    [ Some characters may be displayed incorrectly. ]

This patch fixes vga rendering when the guest endianness differs from
the host endianness: in this case we can only share the buffer if the
bpp is 32 and we must change the pixelformat accordingly.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6413 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6412 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6411 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6410 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6409 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NUri Lublin <uril@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6408 c046a42c-6fe2-441c-8c8c-71466251a162

'num_free_bytes' is the number of non-allocated bytes below highest-allocation.
It's useful, together with the highest-allocation, to figure out how
fragmented the image is, and how likely it will run out-of-space soon.

For example when the highest allocation is high (almost end-of-disk), but 
many bytes (clusters) are free, and can be re-allocated when neeeded, than
we know it's probably not going to reach end-of-disk-space soon.

Added bookkeeping to block-qcow2.c
Export it using BlockDeviceInfo
Show it upon 'info blockstats' if BlockDeviceInfo exists
Signed-off-by: NUri Lublin <uril@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6407 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NUri Lublin <uril@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6406 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NUri Lublin <uril@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6405 c046a42c-6fe2-441c-8c8c-71466251a162

We want to know the highest written offset for qcow2 images.
This gives a pretty good (and easy to calculate) estimation to how
much more allocation can be done for the block device.

It can be usefull for allocating more diskspace for that image
(if possible, e.g. lvm) before we run out-of-disk-space
Signed-off-by: NUri Lublin <uril@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6404 c046a42c-6fe2-441c-8c8c-71466251a162

The vm state handler needed updating after the recent vm state change
notification refactoring.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6403 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6402 c046a42c-6fe2-441c-8c8c-71466251a162

Exclude objects in the root directory and temporary stgit files.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6401 c046a42c-6fe2-441c-8c8c-71466251a162

make install-doc omits an explicit permission mask for the man-pages. This
defaults to have the executable bits set. Adding "-m 644" (for rw-r--r--)
fixes that.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6400 c046a42c-6fe2-441c-8c8c-71466251a162

rt_clock returns milliseconds. Fix mux'ed monitor terminal timestamps
accordingly.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6399 c046a42c-6fe2-441c-8c8c-71466251a162

Instead of copying to a temporary buffer, map guest memory for IDE DMA
transactions.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6398 c046a42c-6fe2-441c-8c8c-71466251a162

Most devices that are capable of DMA are also capable of scatter-gather.
With the memory mapping API, this means that the device code needs to be
able to access discontiguous host memory regions.

For block devices, this translates to vectored I/O.  This patch implements
an aynchronous vectored interface for the qemu block devices.  At the moment
all I/O is bounced and submitted through the non-vectored API; in the future
we will convert block devices to natively support vectored I/O wherever
possible.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6397 c046a42c-6fe2-441c-8c8c-71466251a162

In general, it is not possible to predict the size of of an I/O vector since
a contiguous guest region may map to a disconiguous host region.  Add some
helpers to manage I/O vector growth.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6396 c046a42c-6fe2-441c-8c8c-71466251a162

The target memory mapping API may fail if the bounce buffer resources
are exhausted.  Add a notification mechanism to allow clients to retry
the mapping operation when resources become available again.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6395 c046a42c-6fe2-441c-8c8c-71466251a162

Devices accessing large amounts of memory (as with DMA) will wish to obtain
a pointer to guest memory rather than access it indirectly via
cpu_physical_memory_rw().  Add a new API to convert target addresses to
host pointers.

In case the target address does not correspond to RAM, a bounce buffer is
allocated.  To prevent the guest from causing the host to allocate unbounded
amounts of bounce buffer, this memory is limited (currently to one page).
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6394 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6393 c046a42c-6fe2-441c-8c8c-71466251a162

See each patch for individual Signed-off-by's/commit logs



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6392 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6391 c046a42c-6fe2-441c-8c8c-71466251a162

Removing the assumption about a single graphic console made
get_graphic_console return NULL when called by vga_screen_dump.
In this case returning NULL is correct but since NULL is not handled in
qemu_console_resize it causes a segmentation fault.
Just returning immediately from qemu_console_resize is sufficient to fix the
problem.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6390 c046a42c-6fe2-441c-8c8c-71466251a162

Hi all,
this patch fixes the curses interface: when we switch from one console
to another we need to change the displaystate width and height even
though in the curses case the backing buffer remains of the same size.
I am also putting back the call to text_console_resize in
text_console_invalidate so that resizeable text consoles can be properly
handled.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6389 c046a42c-6fe2-441c-8c8c-71466251a162

This version of the patch adds new option "werror" to -drive flag.
Possible values are:

report    - report errors to a guest as IO errors
ignore    - continue as if nothing happened
stop      - stop VM on any error and retry last command on resume
enospc    - stop vm on ENOSPC error and retry last command on resume
            all other errors are reported to a guest.

Default is "report" to maintain current behaviour.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6388 c046a42c-6fe2-441c-8c8c-71466251a162

Allocate a DisplaySurface in dumb_display_init if none else does it.
The DisplaySurface will be used for the qemu monitor, serial and
parallel ports, etc.
Signed-off-by: NAndrew May  <acmay@acmay.homeip.net>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6387 c046a42c-6fe2-441c-8c8c-71466251a162

Switc vram unmapping in map_linear_vram to the simpler pattern used by
unmap_linear_vram.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6386 c046a42c-6fe2-441c-8c8c-71466251a162

We should not re-register the cirrus io-memory regions on each reset.
Moreover, this patch removes some dead code and pushes other static
field initializations from reset to init_common.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6385 c046a42c-6fe2-441c-8c8c-71466251a162

cirrus bitblt reset will stop and start dirty logging even when there is no
need; this causes full redraws.

avoid by only updating memory access when exiting cpu-to-video update mode.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6384 c046a42c-6fe2-441c-8c8c-71466251a162

Cleaned-up port from kvm-userspace: We have to stop any vram logging
while doing remaps. Otherwise the logger gets confused. This reward is
enormously accelerated cirrus vga in kvm mode.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6383 c046a42c-6fe2-441c-8c8c-71466251a162

Fix the broken text mode after reset by unmapping potentially mapped
vram.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6382 c046a42c-6fe2-441c-8c8c-71466251a162

Put archive utility (ar) invocations into a rule, and have it generate
quiet output by default.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6381 c046a42c-6fe2-441c-8c8c-71466251a162

Spew out less noise when compiling.  This helps review make output for
information such as compilation warnings, rather than extra long compiler
invocations.

The full output can be generated by supplying a 'V=1' parameter to make.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6380 c046a42c-6fe2-441c-8c8c-71466251a162

Use generic rules where posssible, and a LINK macro where not.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6379 c046a42c-6fe2-441c-8c8c-71466251a162

Add a file for common makefile rules.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6378 c046a42c-6fe2-441c-8c8c-71466251a162

Instead of specifying the compilation command over and over, use a single
rule and adjust it as necessary using target specific target overrides.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6377 c046a42c-6fe2-441c-8c8c-71466251a162