Version 3 ram_load depends on ram_addrs, which are not stable.  Version 4
was introduced in 0.13 (and RHEL 6), so this means live migration from 0.12
and earlier to 1.1 or later will not work.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

ram_addr is (a) unstable (b) going away.  Sort by idstr instead.

Commit b2e0a138 initially introduced the sorting for the purpose
of improving debuggability.  After this patch, the order is still
stable, but perhaps less usable by a human.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Avoid using ram_addr_t, instead use (MemoryRegion *, offset) pairs.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

NULL is a valid bus/device, so there is no change in behaviour.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The function is still used as the implementation.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Make *save_live() return negative values when there is one error, and
updates all callers to check for the error.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

Now the function returned errno, so it is better the new name.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

We normally already have an errno value.  When not, abuse EIO.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

qemu_service_io was mainly an alias to qemu_notify_event,
currently used only by PPC for timer hack, so call
qemu_notify_event directly.
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

qemu_malloc/qemu_free no longer exist after this commit.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This option gives the ability to switch one "accelerator" like kvm, xen
or the default one tcg. We can specify more than one accelerator by
separate them by a colon. QEMU will try each one and use the first whose
works.

So,
./qemu -machine accel=xen:kvm:tcg

which would try Xen support first, then KVM and finally TCG if none of
the other works.

By default, QEMU will use TCG. But we can specify another default in the
global configuration file.
Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch adds support for the LatticeMico32 softcore processor by Lattice
Semiconductor.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

consolidate audio_init() and remove references to shoundhw.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This makes ram block ordering under migration stable, ordered by offset.
This is especially useful for migration to exec, for debugging.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NJason Wang <jasowang@redhat.com>

This patch adds three devices to qemu:

intel-hda
	Intel HD Audio Controller, the PCI device.  Provides a HDA bus.
	Emulates ICH6 at the moment.  Adding a ICH9 PCIE
	variant shouldn't be hard.

hda-duplex
	HDA Codec.  Attaches to the HDA bus.  Supports 16bit stereo,
	rates 16k -> 96k, playback, recording and volume control
	(with CONFIG_MIXEMU=y).

hda-output
	HDA Codec without recording support.  Subset of the hda-duplex
	codec.  Use this if you don't want your guests access your mic.

Usage: add '-device intel-hda -device hda-duplex' to your command line.

Tested guests:
 * Linux works.
 * Win7 works.
 * DOS (mpxplay) works.
 * WinXP doesn't work.

[ v2 changes ]
 * Fixed endianess, big endian hosts work now.
 * Fixed some emulation bugs.
 * Added immediate command emulation.
 * Added vmstate support.
 * Make it behave like all other sound card drivers:
   - can be configured via '--audio-card-list=hda'
   - can be added to a VM using '-soundhw hda'
 * Code style fixups.
 * Zapped guest-triggerable asserts.
 * Handle partial reads/writes of audio data correctly.

Cc: malc <av1474@comtv.ru>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nmalc <av1474@comtv.ru>

host_from_stream_offset returns NULL on error,
return error instead of trying to use that address,
to avoid segfault on invalid stream.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

vl.c has a Sun-specific hack to supply a prototype for madvise(),
but the call site has apparently moved to arch_init.c.

Haiku doesn't implement madvise() in favor of posix_madvise().
OpenBSD and Solaris 10 don't implement posix_madvise() but madvise().
MinGW implements neither.

Check for madvise() and posix_madvise() in configure and supply qemu_madvise()
as wrapper. Prefer madvise() over posix_madvise() due to flag availability.
Convert all callers to use qemu_madvise() and QEMU_MADV_*.

Note that on Solaris the warning is fixed by moving the madvise() prototype,
not by qemu_madvise() itself. It helps with porting though, and it simplifies
most call sites.

v7 -> v8:
* Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl.

v6 -> v7:
* Adopt madvise() rather than posix_madvise() semantics for returning errors.
* Use EINVAL in place of ENOTSUP.

v5 -> v6:
* Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID.
  Spotted by Blue Swirl.

v4 -> v5:
* Introduce QEMU_MADV_INVALID, suggested by Alexander Graf.
  Note that this relies on -1 not being a valid advice value.

v3 -> v4:
* Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl.
  This will currently break the check in kvm-all.c by calling madvise() with
  a supported flag, which will not fail. Ideas/patches welcome.

v2 -> v3:
* Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf.
* Add configure check for madvise(), too.
  Add defines to Makefile, not QEMU_CFLAGS.
  Convert all callers, untested. Suggested by Blue Swirl.
* Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf.
* Display configure check results.

v1 -> v2:
* Don't rely on posix_madvise() availability, add qemu_madvise().
  Suggested by Blue Swirl.
Signed-off-by: NAndreas Färber <afaerber@opensolaris.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NYoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If we save more than once we need to reset the last block info or else
only the first save has the actual block info and each subsequent save
will only use continue flags, making them unloadable independently.
Found-by: NMiguel Di Ciurcio Filho <miguel.filho@gmail.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Acked-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now that we have a working qemu_ram_free() and the primary runtime
user of it has been updated, don't be lenient about duplicate id strings.
We also shouldn't need to create them ondemand at the target.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allows us to compress the protocol a bit by setting a flag on the
offset which indicates we're still working within the same block
as last time.  That way we can avoid sending the block name for
every page.  Suggested by Anthony Liguori.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We don't want to assume a contiguous address space, so migrate based
on RAM blocks instead of a fixed linear address map.  This will allow
us to have holes in the ram_addr_t namespace, so we can implement
qemu_ram_free().
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Synchronize RAM blocks with the target and migrate using name/offset
pairs.  This ensures both source and target have the same view of
RAM and that we get the right bits into the right slot.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We currently need this either to allocate the next ram_addr_t for a
new block, or for total memory to be migrated.  Both of which we can
calculate without need of this to keep us in a contiguous address space.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This makes the RAM block list easier to manipulate.  Also incorporate
relevant variables into the RAMList struct.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Acked-by: NChris Wright <chrisw@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When a page with all identical bytes is transferred, it is counted
as a full page (TARGET_PAGE_SIZE) although only one byte is actually
sent. Fix this by changing ram_save_block() to return the number of
bytes sent instead of a boolean value. This makes bandwidth
estimation, and consequently downtime estimation, more precise.
Signed-off-by: NPierre Riteau <Pierre.Riteau@irisa.fr>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move target specific functions and RAM handling to arch_init.c.

Add a flag to QEMUOptions structure to indicate for which
architectures the option is allowed, check the flag
in run time and remove conditional code in option handling.

Now that no target dependencies remain, compile vl.c only once
for all targets.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>