- 21 2月, 2011 4 次提交
-
-
由 Juha Riihimäki 提交于
We handle Thumb Neon data processing instructions by converting them into the equivalent ARM encoding, as the two are very close. However the ARM encoding should have bit 28 set, not clear. This wasn't causing any problems because we don't actually look at that bit during decode; however it is better to do the conversion correctly to avoid problems later if we add checks to UNDEF on SBZ/SBO bits. Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
For VQDMLSL, negation has to occur after saturation, not before. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Refactor the handling of VQDMULL so that it is dealt with in its own if() case rather than together with the accumulating instructions. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Implement VMULL.P8 (the 32x32->64 version of the polynomial multiply instruction). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 20 2月, 2011 21 次提交
-
-
由 Peter Maydell 提交于
Since configure guarantees us that we have pthreads on all hosts except mingw (which doesn't support a USER_ONLY config), we can and should use the pthread_mutex based implementation of spin_lock() and spin_unlock() in all USER_ONLY cases. This means that all the inline-native-assembly code supporting the "USER_ONLY but not USE_NPTL" case can go away. The not-USER_ONLY case remains as empty implementations; there is no change in behaviour here. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Michael S. Tsirkin 提交于
The spec says: Any descriptor with a non-zero status byte has been processed by the hardware, and is ready to be handled by the software. Thus, once we change a descriptor status to non-zero we should never move the head backwards and try to reuse this descriptor from hardware. This actually happened with a multibuffer packet that arrives when we don't have enough buffers. Fix by checking that we have enough buffers upfront so we never need to discard the packet midway through. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NAlex Williamson <alex.williamson@redhat.com> Acked-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Michael S. Tsirkin 提交于
The e1000 spec says: if software statically allocates buffers, and uses memory read to check for completed descriptors, it simply has to zero the status byte in the descriptor to make it ready for reuse by hardware. This is not a hardware requirement (moving the hardware tail pointer is), but is necessary for performing an in–memory scan. Thus the guest does not have to clear the status byte. In case it doesn't we need to clear EOP for all descriptors except the last. While I don't know of any such guests, it's probably a good idea to stick to the spec. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reported-by: NJuan Quintela <quintela@redhat.com> Acked-by: NAlex Williamson <alex.williamson@redhat.com> Acked-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Michael S. Tsirkin 提交于
e1000 supports multi-buffer packets larger than rxbuf_size. This fixes the following (on linux): - in guest: ifconfig eth1 mtu 16110 - in host: ifconfig tap0 mtu 16110 ping -s 16082 <guest-ip> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NAlex Williamson <alex.williamson@redhat.com> Acked-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Both i386 and x86_64 targets are now using target_phys_bits=64. Remove useless code. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
qemu i386 used to support more than 4GB of RAM through PAE, but it has been disabled for an unknown reason. Reenable it. Note that simply running qemu x86_64 and emulating a 32-bit CPU is not a solution to this problem as it is about 15% slower (it needs to emulate 64 bit registers even if half of them are not used). On the other hand, I haven't seen any measurable impact by switching target_phys_bits to 64. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
git://gitorious.org/qemu-maemo/qemu由 Aurelien Jarno 提交于
* 'linux-user-for-upstream' of git://gitorious.org/qemu-maemo/qemu: linux-user: correct core dump format linux-user: Define target alignment size linux-user: Support the epoll syscalls linux-user: in linux-user/strace.c, tswap() is useless linux-user: add rmdir() strace
-
由 Blue Swirl 提交于
Convert to qdev. Don't expose PITState. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Ignore failure with vga-isa device creation, but print a warning message. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Based on patch by David Ahern. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Ignore failure with fdc device creation. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Turn fdc_init_isa into an inline function. Get floppy geometry directly from the drives. Don't expose FDCtrl. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Other geometry guessing functions already reside in block.c. Remove some unused or debugging only fields. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Ignore failure with serial device creation. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Turn serial_init into an inline function. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Ignore failure with ne2000_isa device creation. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Turn isa_ne2000_init into an inline function. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Ignore failure with parallel device creation. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Turn parallel_init into an inline function. Don't expose ParallelState. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 18 2月, 2011 1 次提交
-
-
由 Marcelo Tosatti 提交于
Fix regression caused by qdev conversion. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 17 2月, 2011 5 次提交
-
-
由 Laurent Vivier 提交于
This patch allows to really use the core dumped by qemu with guest architecture tools. - it adds a missing bswap_phdr() for the program headers of memory regions. "objdump -x" sample: BEFORE: 0x1000000 off 0x00200000 vaddr 0x00000400 paddr 0x00000000 align 2**21 filesz 0x00000000 memsz 0x00100000 flags --- 0x1000000 off 0x00200000 vaddr 0x00100400 paddr 0x00000000 align 2**21 filesz 0x00000000 memsz 0x00080000 flags --- 6000000 AFTER: LOAD off 0x00002000 vaddr 0x00040000 paddr 0x00000000 align 2**13 filesz 0x00000000 memsz 0x00001000 flags --- LOAD off 0x00002000 vaddr 0x00041000 paddr 0x00000000 align 2**13 filesz 0x00000000 memsz 0x00000800 flags rw- - it doesn't pad the note size to sizeof(int32_t). On m68k the NT_PRSTATUS note size is 154 and must not be rounded up to 156, because this value is checked by objdump and gdb. "gdb" symptoms: "warning: Couldn't find general-purpose registers in core file." "objdump -x" sample: BEFORE: Sections: Idx Name Size VMA LMA File off Algn 0 note0 000001c4 00000000 00000000 000003b4 2**0 CONTENTS, READONLY 1 .auxv 00000070 00000000 00000000 00000508 2**2 CONTENTS 2 proc1 00100000 00000400 00000000 00200000 2**10 READONLY AFTER: Sections: Idx Name Size VMA LMA File off Algn 0 note0 000001c4 00000000 00000000 000003b4 2**0 CONTENTS, READONLY 1 .reg/19022 00000050 00000000 00000000 0000040e 2**2 CONTENTS 2 .reg 00000050 00000000 00000000 0000040e 2**2 CONTENTS 3 .auxv 00000070 00000000 00000000 00000508 2**2 CONTENTS 4 load1 00000000 00040000 00000000 00002000 2**13 ALLOC, READONLY Signed-off-by: NLaurent Vivier <laurent@vivier.eu> Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
-
由 Laurent Vivier 提交于
Datatype alignment can be found using following application: int main(void) { printf("alignof(short) %ld\n", __alignof__(short)); printf("alignof(int) %ld\n", __alignof__(int)); printf("alignof(long) %ld\n", __alignof__(long)); printf("alignof(long long) %ld\n", __alignof__(long long)); } This patch includes following alignments: i386 alignof(short) 2 alignof(int) 4 alignof(long) 4 alignof(long long) 8 x86_64 alignof(short) 2 alignof(int) 4 alignof(long) 8 alignof(long long) 8 arm alignof(short) 2 alignof(int) 4 alignof(long) 4 alignof(long long) 4 m68k (680x0) alignof(short) 2 alignof(int) 2 alignof(long) 2 alignof(long long) 2 mips alignof(short) 2 alignof(int) 4 alignof(long) 4 alignof(long long) 8 ppc alignof(short) 2 alignof(int) 4 alignof(long) 4 alignof(long long) 8 for other targets, use by default (2,4,4,8). Please, update for your favorite target... Signed-off-by: NLaurent Vivier <laurent@vivier.eu> Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
-
由 Peter Maydell 提交于
Support the epoll family of syscalls: epoll_create(), epoll_create1(), epoll_ctl(), epoll_wait() and epoll_pwait(). Note that epoll_create1() and epoll_pwait() are later additions, so we have to test separately in configure for their presence. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
-
由 Laurent Vivier 提交于
Syscall parameters are already swapped by the caller. This patch removes useless tswap() from strace.c $ QEMU_STRACE=1 chroot /m68k mknod myramdisk b 1 1 with tswap() ... 29944 mknod("myramdisk",026630200000) = 0 ... without tswap() ... 30042 mknod("myramdisk",S_IFBLK|0666,makedev(1,1)) = 0 ... natively: $ strace touch mytouch ... open("mytouch", O_WRONLY|O_CREAT|O_NOCTTY|O_NONBLOCK, 0666) = 3 ... $ QEMU_STRACE=1 chroot /m68k touch mytouch with tswap() ... 30368 open("/usr/share/locale/locale.alias",O_RDONLY) = 3 30368 fstat64(50331648,0x4080032c) = 0 ... 30368 open("mytouch",O_RDONLY|O_CREAT|O_LARGEFILE|O_NOCTTY|O_NONBLOCK|0x1) = 0 ... without tswap() ... 30572 open("/usr/share/locale/locale.alias",O_RDONLY) = 3 30572 fstat64(3,0x4080032c) = 0 ... 30572 open("mytouch",O_WRONLY|O_CREAT|O_LARGEFILE|O_NOCTTY|O_NONBLOCK,0666) = 0 Signed-off-by: NLaurent Vivier <laurent@vivier.eu> Fixes by Riku Voipio: add casts Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
-
由 Laurent Vivier 提交于
Signed-off-by: NLaurent Vivier <laurent@vivier.eu> Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
-
- 16 2月, 2011 6 次提交
-
-
由 Anthony Liguori 提交于
-
由 Anthony Liguori 提交于
-
由 Tristan Gingold 提交于
Handle option '-icount X' on powerpc targets. Signed-off-by: NTristan Gingold <gingold@adacore.com> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>
-
由 Dmitry Eremin-Solenikov 提交于
Now the only user of mainstone.h is mainstone.c file. Merge header into board file. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Dmitry Eremin-Solenikov 提交于
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Dmitry Eremin-Solenikov 提交于
Simplify IRQ handling to stop setting an input irq pin. As a win, also get correct IRQ status after save/load cycle. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
- 15 2月, 2011 2 次提交
-
-
由 Anthony Liguori 提交于
I unfortunately got on an unnamed branch and pushed the wrong bits Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Bruce Rogers 提交于
Since the addition of the slirp member to struct mbuf, the value of SLIRP_MSIZE and the initialization of m_size have not been correct, resulting in overrunning the end of the malloc'd buffer in some cases. Signed-off-by: NBruce Rogers <brogers@novell.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 14 2月, 2011 1 次提交
-
-
由 Gleb Natapov 提交于
TPR blocks all interrupts in a priority class, so simple "less or equal" check is not enough. Signed-off-by: NGleb Natapov <gleb@redhat.com> Reviewed-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-