When using a control/QMP monitor in tandem with a regular monitor, asynchronous
messages can get lost depending on the order of the QEMU program arguments.
QEMU events issued by monitor_protocol_event() always go to cur_mon.  If the
user monitor was specified on the command line first (or it has ,default), the
message will be directed to the user monitor (not the QMP monitor).
Additionally, only one QMP session is currently able to receive async messages.

To avoid this confusion, scan through the list of monitors and emit the message
on each QMP monitor.
Signed-off-by: NAdam Litke <agl@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since commit 747bbdf7 QEMU_WARN_UNUSED_RESULT is never defined as it is
conditional on a define from config-host.h which is included only later.
Include that file earlier to get the warnings back.

Reactivating it unfortunately leads to some warnings about unused qdev_init
results. These calls are changed to qdev_init_nofail to avoid build failures.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's emitted when a VNC client session is activated by QEMU,
client's information such as port, IP and auth ID (if the
session is authenticated) are provided.

Event example:

{ "event": "VNC_INITIALIZED",
    "timestamp": {"seconds": 1263475302, "microseconds": 150772},
    "data": {
        "server": { "auth": "sasl", "family": "ipv4",
                    "service": "5901", "host": "0.0.0.0"},
        "client": { "family": "ipv4", "service": "46089",
                    "host": "127.0.0.1", "sasl_username": "lcapitulino" } } }
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's emitted when a VNC client disconnects from QEMU, client's
information such as port and IP address are provided.

Event example:

{ "event": "VNC_DISCONNECTED",
    "timestamp": { "seconds": 1262976601, "microseconds": 975795 },
    "data": {
        "server": { "auth": "sasl", "family": "ipv4",
                    "service": "5901", "host": "0.0.0.0" },
        "client": { "family": "ipv4", "service": "58425",
                    "host": "127.0.0.1", "sasl_username": "foo" } } }
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's emitted when a VNC client connects to QEMU, client's information
such as port and IP address are provided.

Note that this event is emitted right when the connection is
established. This means that it happens before authentication
procedure and session initialization.

Event example:

{ "event": "VNC_CONNECTED",
    "timestamp": { "seconds": 1262976601, "microseconds": 975795 },
    "data": {
        "server": { "auth": "sasl", "family": "ipv4",
                    "service": "5901", "host": "0.0.0.0" },
        "client": { "family": "ipv4", "service": "58425",
                    "host": "127.0.0.1" } } }
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When a disconnection happens the client's socket on QEMU
side may become invalid, this way it won't be possible
to query it to get client information, which is going to
be needed by the future QMP VNC_DISCONNECTED event.

To always have this information available we query the
socket at connection time and cache the client info in
struct VncState.

Two function are introduced to perform this job.

vnc_client_cache_addr() is called right when the connection
is made, however the authentication information is not
available at that moment so vnc_client_cache_auth() is
called from protocol_client_init() to get auth info.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It contains the socket adress family name, like "ipv4" or
"ipv6".

This is useful for clients so that they can interpret the
'host' key reliably.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's the SASL username, so it's better to call it 'sasl_username'
to be consistent.

Note that this change wouldn't be allowed if QMP were stable.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

There is no reason to have it as optional and the code
in the server and client gets slightly simpler if the
key is mandatory.

While there also do some cleanup on how the server info is
collected.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently the 'status' key is a string whose value can be
"disabled" or "enabled", change it to the QMP's standard
'enabled' key, which is a bool.

Note that 'status' in being dropped and this wouldn't be
allowed if QMP were stable.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

qemu_chr_open_fd() calls qemu_chr_generic_open(),
so qemu_chr_open_tty() doesn't need to call it.
Signed-off-by: NKusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Current legacy floppy detection is hardcoded based on source file
name. Make this smarter on linux by attempting a floppy specific
ioctl.

v2:
    Give ioctl check higher priority than filename check
    s/IDE/legacy/

v3:
    Actually initialize 'prio' variable
    Check for ioctl success rather than absence of specific failure

v4:
    Explicitly mention that change is linux specific.
Signed-off-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Current CDROM detection is hardcoded based on source file name.
Make this smarter on linux by attempting a CDROM specific ioctl.

This makes '-cdrom /dev/sr0' succeed with no media present.

v2:
    Give ioctl check higher priority than filename check.

v3:
    Actually initialize 'prio' variable.
    Check for ioctl success rather than absence of specific failure.

v4:
    Explicitly mention that change is linux specific.
Signed-off-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The while loop will be executed exactly 0 or 1 times, depending on
env->exit_request.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

By virtue of the previous patch env->current_tb will always be NULL at
the top of cpu_exec's outermost for loop, and at the end of the innermost
while loop.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

There are three paths from the innermost while loop of cpu_exec
to the top of the outermost for loop.  Two do not reset
env->current_tb.  Fix this.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

These are unused since edea5f01 (no need to define global registers in
cpu-exec.c, 2008-05-10).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently we do not implement VLAN tagging for rtl8139(C+),
still data is read from ring buffer headers.

- augment unused assignment with TODO item
- cast txdw1 to void for now
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* Handling of multicast list was missing.
* Multicast all was missing.
* Promiscuous mode for multicast frames was wrong.

This patch is a step to synchronize my maintainer version
of eepro100.c (git://repo.or.cz/qemu/ar7.git) with the
version integrated in QEMU.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Handling of transmit commands is rather complex,
so about 80 lines of code were moved from function
action_command to the new function tx_command.

The two new values "tx" and "cb_address" in the
eepro100 status structure made this possible without
passing too many parameters.

In addition, the moved code was cleaned a little bit:
old comments marked with //~ were removed, C++ style
comments were replaced by C style comments, C++ like
variable declarations after code were reordered.

Simplified mode is still broken. Nor did I fix
endianess issues. Both problems will be fixed in
additional patches (which need this one).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Fixes the boot problem introduced by r665 image in
694b9309.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Common:
 * Remove unnecessary 0x prefix
 * Print %y
 * Fix NZVC flag print order to match CPU bit order

Sparc64 specific:
 * Print registers without line wrapping
 * Print %f40-%f63
 * Pretty print CCR flags
 * Print %fsr and %fprs in full precision
 * More consistent formatting
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: Nmalc <av1474@comtv.ru>

This reverts commit 4839abe7.

The commit was badly broken, Gentoo has sdl as the default driver,
consequently 5 gentoo users have hit the breakage and were kind enough
to report, so thank you:

Claes Gyllenswrd
vekin
Chris

But above all thanks to Toralf Foerster who actually provied enough
information to pinpoint the breakage to sdlaudio.

http://bugs.gentoo.org/show_bug.cgi?id=294269

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Don't clear interrupts on disabling, because
* Sun4M_SystemArchitecture_edited2.pdf doesn't describe
  that masking or un-masking IRQ shall clear pending ones.

* Field tests also show that SPARCstation-20 doesn't
  clear them.

* The patch makes Solaris 2.5.1/2.6 boot ~1500 times
  faster (~20 seconds instead of ~8 hours)
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

According to pages 9-31 - 9-34 of "SuperSPARC & MultiCache Controller
User's Manual":

1. "A lower priority fault may not overwrite the
    MFSR status of a higher priority fault."
2. The MFAR is overwritten according to the policy defined for the MFSR
3. The overwrite bit is asserted if the fault status register (MFSR)
   has been written more than once by faults of the same class
4. SuperSPARC will never place instruction fault addresses in the MFAR.

Implementation of points 1-3 allows booting Solaris 2.6 and 2.5.1.

v2: CODING_STYLE fixes
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The existing P_REXB internal opcode flag unconditionally emits
the REX prefix.  Technically it's not needed if the register in
question is %al, %bl, %cl, %dl.

Eliding the prefix requires splitting the P_REXB flag into two,
in order to indicate whether the byte register in question is
in the REG or the R/M field.  Within TCG, the byte register is
in the REG field only for stores.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Random reading depends on having the last row/page latched and not beeing
clobbered between read and any following random reads.

Also, s->iolen must be updated when loading the io/data register with
randomly accessed flash data.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

When make is called without a valid configuration,
it should tell the user what to do.

Revision 0e8c9214
was a regression which resulted in a message
which was no longer user friendly
(reported by Aurelien Jarno).

This patch restores the old behaviour.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NAndreas Färber <afaerber@opensolaris.org>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Attached is a patch to fix a typo in 'P' packet processing for M68K.

Without this patch, QEMU fails to honor GDB's P packets from GDB
(writing to registers) for the address registers (A0 - A7).

The problem is because of an obvious typo.  Notice that the second
"if" condition is meant to be n < 16 in:

  if (n < 8) {
    :
  } else if (n < 8) {
Signed-off-by: NKazu Hirata <kazu@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This avoids an unnecessary REX.W prefix when dealing with AND
operands that fit into a 32-bit quantity.  The most common change
actually seen is movz[wb]q -> movz[wb]l.

Similarly, avoid REXW in ext{8,16}u_i64 tcg opcodes.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch adds hardware cursor feature to SM501 graphics chip emulation,
to make the graphic console more useful for QEMU SH4 users.
Signed-off-by: NShin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>