- 04 10月, 2011 7 次提交
-
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Please, note that the RunState type as defined in sysemu.h and its runstate_as_string() function are being dropped in favor of the RunState type generated by the QAPI. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Next commit will convert the query-status command to use the RunState type as generated by the QAPI. In order to "transparently" replace the current enum by the QAPI one, we have to make some changes to some enum values. As the changes are simple renames, I'll do them in one shot. The changes are: - Rename the prefix from RSTATE_ to RUN_STATE_ - RUN_STATE_SAVEVM to RUN_STATE_SAVE_VM - RUN_STATE_IN_MIGRATE to RUN_STATE_INMIGRATE - RUN_STATE_PANICKED to RUN_STATE_INTERNAL_ERROR - RUN_STATE_POST_MIGRATE to RUN_STATE_POSTMIGRATE - RUN_STATE_PRE_LAUNCH to RUN_STATE_PRELAUNCH - RUN_STATE_PRE_MIGRATE to RUN_STATE_PREMIGRATE - RUN_STATE_RESTORE to RUN_STATE_RESTORE_VM - RUN_STATE_PRE_MIGRATE to RUN_STATE_FINISH_MIGRATE Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Anthony Liguori 提交于
A simple example conversion 'info name'. This also adds the new files for QMP and HMP. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Anthony Liguori 提交于
Use the new middle mode within the existing QMP server. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 02 10月, 2011 1 次提交
-
-
由 Blue Swirl 提交于
Add a monitor command 'info mtree' to show the memory hierarchy much like /proc/iomem in Linux. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 16 9月, 2011 6 次提交
-
-
由 Luiz Capitulino 提交于
Today our printf format for the "info status" command is: VM status: %s Where the string can be "running", "running (single step mode)" or "paused". This commit extends it to: VM status: %s (%s) The second string corresponds to the "status" field as returned by the query-status QMP command and it's only printed if "status" is not "running" or "paused". Example: VM status: paused (shutdown) PS: libvirt uses "info status" when using HMP, but the new format should not break it. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
This new key reports the current VM status to clients. Please, check the documentation being added in this commit for more details. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
We have two states where issuing cont before system_reset can cause problems: RSTATE_SHUTDOWN (when -no-shutdown is used) and RSTATE_PANICKED (which only happens with kvm). This commit fixes that by doing the following when state is RSTATE_SHUTDOWN or RSTATE_PANICKED: 1. returning an error to the user/client if cont is issued 2. automatically transition to RSTATE_PAUSED during system_reset Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Use runstate_is_running() instead, which is introduced by this commit. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Test against RSTATE_IN_MIGRATE instead. Please, note that the RSTATE_IN_MIGRATE state is only set when all the initial VM setup is done, while 'incoming_expected' was set right in the beginning when parsing command-line options. Shouldn't be a problem as far as I could check. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Today, when notifying a VM state change with vm_state_notify(), we pass a VMSTOP macro as the 'reason' argument. This is not ideal because the VMSTOP macros tell why qemu stopped and not exactly what the current VM state is. One example to demonstrate this problem is that vm_start() calls vm_state_notify() with reason=0, which turns out to be VMSTOP_USER. This commit fixes that by replacing the VMSTOP macros with a proper state type called RunState. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 09 9月, 2011 1 次提交
-
-
由 Nathan Kunkee 提交于
This patch fixes the spacing of the PC output from 'info cpus' for SPARC. Signed-off-by: NNathan Kunkee <nkunkee42@hotmail.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 01 9月, 2011 3 次提交
-
-
由 Lluís 提交于
The current interface is generic for this small set of operations, and thus other backends can easily modify the "trace/control.c" file to add their own implementation. Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
-
由 Lluís 提交于
Generalize the 'st_print_trace_events' and 'st_change_trace_event_state' into backend-specific 'trace_print_events' and 'trace_event_set_state' (respectively) in the "trace/control.h" file. Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
-
由 Lluís 提交于
Provides a more hierarchical view of the variable domain. Also adds the CONFIG_TRACE_* variables for all backends. [Stefan added missing 'test' in stap if statement] Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 25 8月, 2011 1 次提交
-
-
由 Jamie Iles 提交于
Commit c62f6d1d (monitor: fix build breakage with --disable-vnc) conditionalised some VNC setup code but left an unused variable. Move the variable into the conditional code to fix the build breakage. Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 22 8月, 2011 7 次提交
-
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Austin Clements 提交于
This is the same fix that was recently applied to info mem. Before this change, info tlb output looked like: ffffffffffffc000: 000000000fffc000 --------W ffffffffffffd000: 000000000fffd000 --------W ffffffffffffe000: 000000000fffe000 --------W fffffffffffff000: 000000000ffff000 --------W With this change, it looks like 00000000ffffc000: 000000000fffc000 --------W 00000000ffffd000: 000000000fffd000 --------W 00000000ffffe000: 000000000fffe000 --------W 00000000fffff000: 000000000ffff000 --------W Signed-off-by: NAustin Clements <amdragon@mit.edu> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Austin Clements 提交于
Previously, "info mem" considered and displayed only the last-level protection bits for a memory range, which doesn't accurrately represent the protection of that range. Now it shows the combined protection. Signed-off-by: NAustin Clements <amdragon@mit.edu> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Austin Clements 提交于
"info mem" groups its output into contiguous ranges with identical protection bits, but previously forgot to print the last range. Signed-off-by: NAustin Clements <amdragon@mit.edu> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Austin Clements 提交于
Previously, on 32-bit i386, info mem used signed 32-bit int's to store the page table indexes. As a result, address calculation was done in 32 bits and then incorrectly sign-extended to 64 bits, yielding output like ffffffffef000000-ffffffffef031000 0000000000031000 ur- ffffffffef7bc000-ffffffffef7bd000 0000000000001000 urw ffffffffef7bd000-ffffffffef7be000 0000000000001000 ur- This makes these indexes unsigned, which yields correct output 00000000ef000000-00000000ef031000 0000000000031000 ur- 00000000ef7bc000-00000000ef7bd000 0000000000001000 urw 00000000ef7bd000-00000000ef7be000 0000000000001000 ur- Signed-off-by: NAustin Clements <amdragon@mit.edu> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 21 8月, 2011 1 次提交
-
-
由 Anthony Liguori 提交于
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 29 7月, 2011 1 次提交
-
-
由 TeLeMan 提交于
The breakage was introduced by the commit 13661089Signed-off-by: NTeLeMan <geleman@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 24 7月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
Allow client connections for VNC and socket based character devices to be passed in over the monitor using SCM_RIGHTS. One intended usage scenario is to start QEMU with VNC on a UNIX domain socket. An unprivileged user which cannot access the UNIX domain socket, can then connect to QEMU's VNC server by passing an open FD to libvirt, which passes it onto QEMU. { "execute": "get_fd", "arguments": { "fdname": "myclient" } } { "return": {} } { "execute": "add_client", "arguments": { "protocol": "vnc", "fdname": "myclient", "skipauth": true } } { "return": {} } In this case 'protocol' can be 'vnc' or 'spice', or the name of a character device (eg from -chardev id=XXXX) The 'skipauth' parameter can be used to skip any configured VNC authentication scheme, which is useful if the mgmt layer talking to the monitor has already authenticated the client in another way. * console.h: Define 'vnc_display_add_client' method * monitor.c: Implement 'client_add' command * qemu-char.c, qemu-char.h: Add 'qemu_char_add_client' method * qerror.c, qerror.h: Add QERR_ADD_CLIENT_FAILED * qmp-commands.hx: Declare 'client_add' command * ui/vnc.c: Implement 'vnc_display_add_client' method Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 27 6月, 2011 1 次提交
-
-
由 Blue Swirl 提交于
Most exec-all.h include directives are now useless, remove them. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 01 6月, 2011 2 次提交
-
-
由 Luiz Capitulino 提交于
This **CHANGES** the human monitor "nmi" command behavior. Currently it accepts an CPU argument which, when provided, will send the NMI to the specified CPU. This feature is of discussable value though and HMP shouldn't have more features than QMP, so let's use QMP's instead (it's also simpler). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Lai Jiangshan 提交于
inject-nmi command injects an NMI on all CPUs of guest. It is only supported for x86 guest currently, it will returns "Unsupported" error for non-x86 guest. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 10 5月, 2011 1 次提交
-
-
由 Scott Wood 提交于
Read them via KVM_GET_SREGS in kvm_arch_get_registers(), and display them in "info registers". Also get CR and PID from the existing KVM_GET_REGS. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 13 4月, 2011 2 次提交
-
-
由 Stefan Weil 提交于
Using cpu_physical_memory_read, cpu_physical_memory_write and ldub_phys improves readability and allows removing some type casts. lduw_phys and ldl_phys were not used because both require aligned addresses. Therefore it is not possible to simply replace existing calls by one of these functions. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Stefan Weil 提交于
All other type casts in calls of cpu_physical_memory_read are used by hardware emulations and will be fixed by separate patches. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 02 4月, 2011 1 次提交
-
-
由 David Gibson 提交于
On ppc machines with hash table MMUs, the special purpose register SDR1 contains both the base address of the encoded size (hashed) page tables. At present, we interpret the SDR1 value within the address translation path. But because the encodings of the size for 32-bit and 64-bit are different this makes for a confusing branch on the MMU type with a bunch of curly shifts and masks in the middle of the translate path. This patch cleans things up by moving the interpretation on SDR1 into the helper function handling the write to the register. This leaves a simple pre-sanitized base address and mask for the hash table in the CPUState structure which is easier to work with in the translation path. This makes the translation path more readable. It addresses the FIXME comment currently in the mtsdr1 helper, by validating the SDR1 value during interpretation. Finally it opens the way for emulating a pSeries-style partition where the hash table used for translation is not mapped into the guests's RAM. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 22 3月, 2011 1 次提交
-
-
由 Jes Sorensen 提交于
Per default VNC is enabled. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 21 3月, 2011 1 次提交
-
-
由 Paolo Bonzini 提交于
This was done with: sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \ $(git grep -l 'qemu_get_clock\>' ) sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \ $(git grep -l 'qemu_new_timer\>' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. There was exactly one false positive in qemu_run_timers: - current_time = qemu_get_clock (clock); + current_time = qemu_get_clock_ns (clock); which is of course not in this patch. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 17 3月, 2011 1 次提交
-
-
由 Jan Kiszka 提交于
Based on patch by Glauber Costa: To allow management applications like libvirt to apply CPU affinities to the VCPU threads, expose their ID via info cpus. This patch provides the pre-existing and used interface from qemu-kvm. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 15 3月, 2011 1 次提交
-
-
由 Jan Kiszka 提交于
Allow to tell cpu_x86_inject_mce that it should ignore Action Optional MCE events when the target VCPU is still processing another one. This will be used by KVM soon. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> CC: Huang Ying <ying.huang@intel.com> CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> CC: Jin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-