This patch is a major overhaul of the device properties.  The properties
are saved directly in the device state struct now, the linked list of
property values is gone.

Advantages:
  * We don't have to maintain the list with the property values.
  * The value in the property list and the value actually used by
    the device can't go out of sync any more (used to happen for
    the pci.devfn == -1 case) because there is only one place where
    the value is stored.
  * A record describing the property is required now, you can't set
    random properties any more.

There are bus-specific and device-specific properties.  The former
should be used for properties common to all bus drivers.  Typical
use case is bus addressing, i.e. pci.devfn and i2c.address.

Properties have a PropertyInfo struct attached with name, size and
function pointers to parse and print properties.  A few common property
types have PropertyInfos defined in qdev-properties.c.  Drivers are free
to implement their own very special property parsers if needed.

Properties can have default values.  If unset they are zero-filled.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Useful for testing hardware emulations or manipulating its state to
stress guest drivers.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently only common PS2 state is initialized, leaving keyboard and
mouse specific state to contain stale values.

Signed-off-by: Dinesh Subhraveti <dineshs@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Hi,

Whoever wrote this migrate_set_speed function is totally stupid.

Any failed or completed migration keeps its state to allow probing of
migration data, but has no associated file anymore. It is, thus,
possible to crash qemu by calling migrate_set_speed after a migration
is finished (or failed, or cancelled), but before another one starts.

This patch fixes it.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch removes dead i386 assembly code from softmmu_header.h.

The code is conditional on ASM_SOFTMMU, which is never defined.
Optimisation for the fast path is already handled by tcg_out_qemu_ld()
and tcg_out_qemu_st(), so there seems to be little need for this code.
Signed-off-by: NStuart Brady <stuart.brady@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Instead of doing our own check for protocols which fails because raw isn't
formally a protocol but special cased in find_protocol specify the BDRV_O_FILE
option to use the same code as bdrv_file_open does.

While we're at it also add the missing documentation for -g to the main
qemu-io help string.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use static empty variable s_cputlb_empty_entry to clear entries,
also reset addend member when clearing entries.
This helps running with valgrind/memcheck

Signed-off-by: igor.v.kovalenko@gmail.com

--
Kind regards,
Igor V. Kovalenko
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Without this, after system reset, hpet does not detect transition from
non-legacy to legacy mode.
Signed-off-by: NBeth Kon <eak@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The load_vmstate and save_vmstate functions are implemented as a
variation of the normal read/write operation, enabled by the -b option.
This is the same mechanism as is used to switch from read/write to
pread/pwrite.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Here is a patch I had sent twice to the list 2 years ago.
Hopefuly this time someone will be interested

It adds support for passing vga mode to linux kernel through
vga= option in -append
Signed-off-by: NPascal Terjan <pterjan@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Using int for cpu_{in, out}[bwl] is inconsistent with other part
because for address or value, uintN_t is used by other qemu part.
At least, softmmu, CPU{Read, Write}MemoryFunc, pci, target_phys_addr_t
and the callers of cpu_{in, out}[bwl]().
This patch removes the inconsistency.

IO port has its own address space so define pio_addr_t as uint32_t
because PCI io space width is 32bit.
And use uint{32, 16, 8}_t for ioport value.
Changing signedness of value might cause subtle issue. However
only a suspicious caller is kvm_handle_io() which is ok. And other callers
pass unsigned value in the first place.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Cc: Stuart Brady <sdbrady@ntlworld.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: Samuel Thibault <samuel.thibault@gnu.org>
Cc: Tristan Gingold <gingold@adacore.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

remove some #ifdef DEBUG_UNUSED_IOPORT in ioport.c
and use PRIx32 where appropriate
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In qemu-iotests, some large images are created using qemu-img.

Without checks for errors, qemu-img will just create an
empty image, and later read / write tests will fail.

With the patch, failures during image creation are detected
and reported.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since we recently do not disable 3DNOW! support anymore, we should
avoid setting the bits in the default qemu64 CPU model to ease
migration. TCG does not support it anyway and even AMD deprecates
it's usage nowadays.
If you want to use it in KVM, use the phenom, athlon or host CPU
model.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

-S is not honored by qemu on incoming migration.  If a domain is migrated
while paused, thus, it will start running on the remote machine; this
is wrong.

Given the trivial patch to fix this, it looks more like a thinko
than anything else, probably dating back to the qemu-kvm merge.
The interesting part is that the -S mechanism was in fact *used* when
migrating (setting autostart = 0) and the incoming migration code was
starting the VM at the end of the migration.

Since I was removing the vm_start from there, I also corrected a related
imprecision.  The code was doing a vm_stop "just in case", but we can
be sure that the VM is not running---the vm_start call in vl.c has not
been reached yet.  So the vm_stop is removed together with the vm_start.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Also increase QDEV_MAX_IRQ.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

That dirties the working directory of the tree.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This combination of ld/object was suggested by Bartlomiej Celary
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

v1 -> v2 adds comment suggested by Ryan.
v2 -> v3 clarifies comment and corrects entry count
Signed-off-by: NBeth Kon <eak@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

remove unnecessary #ifdef DEBUG_PCI.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The VM state offset is a concept internal to the image format.  Replace
the old bdrv_{get,put}_buffer method that require an index into the
image file that is constructed from the VM state offset and an offset
into the vmstate with the bdrv_{load,save}_vmstate that just take an
offset into the VM state.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We're marking the used entry bitmap in smbios_load_external() for each
type we check, regardless of whether we loaded anything.  This makes
subsequent calls behave as if we've already loaded the tables from qemu
and can result in missing tables (ex. multiple type4 entries on an SMP
guest).  Only mark the bitmap if we actually load something.
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This allows to set segment registers via gdb also in system emulation
mode. Basic sanity checks are applied and nothing is changed if they
fail. But screwing up the target via this interface will never be
complicated, so I avoided being too paranoid here.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Clarify gdb's register set layout by using constants for
cpu_gdb_read/write_register.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds support for the vCont remote gdb command. It is used by
gdb 6.8 or better to switch the debugging focus for single-stepping
multi-threaded targets, ie. multi-threaded application in user mode
emulation or VCPUs in system emulation.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This got broken between a13a4126 and c92ef6a2: old slirp code used
255.255.255.0.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Disable the lengthy BIOS prompt for selecting a boot device by default,
but let the user reenable it via '-boot menu=on'.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This allows to specify an exceptional boot order only for the first
startup of the guest. After reboot, qemu will switch back to the default
order (or what was specified via 'order='). Makes installing from CD
images and then booting the freshly set up harddisk more handy.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Will be used by '-boot once=...', and should also help in other use
cases.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Convert the reset handler maintenance code to TAILQ services.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move registration function for the boot_set callback handler and provide
qemu_boot_set so that it can also be used outside the monitor code.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>