Using the previous patches, we're now able to timestamp the SETUP
state. Once we have this time, let the user know about it in the
schema.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Code that does need to be visible is kept
well contained inside this file and this is the only
new additional file to the entire patch.

This file includes the entire protocol and interfaces
required to perform RDMA migration.

Also, the configure and Makefile modifications to link
this file are included.

Full documentation is in docs/rdma.txt
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This gives RDMA shared access to madvise() on the destination side
when an entire chunk is found to be zero.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

this patch adds a efficient encoding for zero blocks by
adding a new flag indicating a block is completely zero.

additionally bdrv_write_zeros() is used at the destination
to efficiently write these zeroes. depending on the implementation
this avoids that the destination target gets fully provisioned.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The auto-converge migration capability allows the user to specify if they
choose live migration seqeunce to automatically detect and force convergence.
Signed-off-by: NChegu Vinod <chegu_vinod@hp.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This capability allows you to disable dynamic chunk registration
for better throughput on high-performance links.

For example, using an 8GB RAM virtual machine with all 8GB of memory in
active use and the VM itself is completely idle using a 40 gbps infiniband link:

1. x-rdma-pin-all disabled total time: approximately 7.5 seconds @ 9.5 Gbps
2. x-rdma-pin-all enabled total time: approximately 4 seconds @ 26 Gbps

These numbers would of course scale up to whatever size virtual machine
you have to migrate using RDMA.

Enabling this feature does *not* have any measurable affect on
migration *downtime*. This is because, without this feature, all of the
memory will have already been registered already in advance during
the bulk round and does not need to be re-registered during the successive
iteration rounds.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

These are the prototypes and implementation of new hooks that
RDMA takes advantage of to perform dynamic page registration.

An optional hook is also introduced for a custom function
to be able to override the default save_page function.

Also included are the prototypes and accessor methods used by
arch_init.c which invoke funtions inside savevm.c to call out
to the hooks that may or may not have been overridden
inside of QEMUFileOps.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This exposes throughput (in megabits/sec) through QMP.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

RDMA writes happen asynchronously, and thus the performance accounting
also needs to be able to occur asynchronously. This allows anybody
to call into savevm.c to update both f->pos as well as into arch_init.c
to update the acct_info structure with up-to-date values when
the RDMA transfer actually completes.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

during bulk stage of ram migration if a page is a
zero page do not send it at all.
the memory at the destination reads as zero anyway.

even if there is an madvise with QEMU_MADV_DONTNEED
at the target upon receipt of a zero page I have observed
that the target starts swapping if the memory is overcommitted.
it seems that the pages are dropped asynchronously.

this patch also updates QMP to return the number of
skipped pages in MigrationStats.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

The indirection is useless now.  Backends can open s->file directly.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Second, drop the file descriptor indirection, and write directly to the
QEMUFile.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

As a start, use QEMUFile to store the destination and close it.
qemu_get_fd gets a file descriptor that will be used by the write
callbacks.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Buffering was needed because blocking writes could take a long time
and starve other threads seeking to grab the big QEMU mutex.

Now that all writes (except within _complete callbacks) are done
outside the big QEMU mutex, we do not need buffering at all.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Perform final cleanup in a bottom half, and add joining the thread to
the series of cleanup actions.

migrate_fd_error remains for connection error, but it doesn't need
to cleanup anything anymore.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Always use qemu_file_get_error to detect errors, since that is how
QEMUFile itself drops I/O after an error occurs.  There is no need
to propagate and check return values all the time.

Also remove the "complete" member, since we know that it is set (via
migrate_fd_cleanup) only when the state changes.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

We removed the calculation in commit e4ed1541

Now we add it back.  We need to create dirty_bytes_rate because we
can't include cpu-all.h from migration.c, and there is no other way to
include TARGET_PAGE_SIZE.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NReviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NReviewed-by: Eric Blake <eblake@redhat.com>

Avoid splitting the state of outgoing migration, more or less arbitrarily,
between two data structures.  QEMUFileBuffered anyway is used only during
migration.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

Put it near its use and un-export it.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This only moves the code (also from buffered_file.h to migration.h).
Fix whitespace until checkpatch is happy.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Code just now does (simplified for clarity)

    if (qemu_savevm_state_iterate(s->file) == 1) {
       vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
       qemu_savevm_state_complete(s->file);
    }

Problem here is that qemu_savevm_state_iterate() returns 1 when it
knows that remaining memory to sent takes less than max downtime.

But this means that we could end spending 2x max_downtime, one
downtime in qemu_savevm_iterate, and the other in
qemu_savevm_state_complete.

Changed code to:

    pending_size = qemu_savevm_state_pending(s->file, max_size);
    DPRINTF("pending size %lu max %lu\n", pending_size, max_size);
    if (pending_size >= max_size) {
        ret = qemu_savevm_state_iterate(s->file);
     } else {
        vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
        qemu_savevm_state_complete(s->file);
     }

So what we do is: at current network speed, we calculate the maximum
number of bytes we can sent: max_size.

Then we ask every save_live section how much they have pending.  If
they are less than max_size, we move to complete phase, otherwise we
do an iterate one.

This makes things much simpler, because now individual sections don't
have to caluclate the bandwidth (it was implossible to do right from
there).
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that we have a thread, and blocking writes, we don't need it.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

This way everything related with migration is run on the migration
thread and no locking is needed.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

We want the file assignment to happen before the thread is created to
avoid locking, so we just do it before creating the thread.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

And remove the superfluous integer return value.
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Error propagation is already there for socket backends.  Add it to other
protocols, simplifying code that tests for errors that will never happen.
With all protocols understanding Error, the code can be simplified
further by removing the return value.

Unfortunately, the quality of error messages varies depending
on where the error is detected, because no Error is passed to the
NonBlockingConnectHandler.  Thus, the exact error message still cannot
be sent to the user if the OS reports it asynchronously via SO_ERROR.
If NonBlockingConnectHandler received an Error**, we could for
example report the error class and/or message via a new field of the
query-migration command even if it is reported asynchronously.

Before:

    (qemu) migrate fd:ffff
    migrate: An undefined error has occurred
    (qemu) info migrate
    (qemu)

After:

    (qemu) migrate fd:ffff
    migrate: File descriptor named 'ffff' has not been found
    (qemu) info migrate
    capabilities: xbzrle: off
    Migration status: failed
    total time: 0 milliseconds
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This makes migration-unix.c again a cut-and-paste job from migration-tcp.c,
exactly as it was in the beginning. :)
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Adjust all callers
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

We only used it once, just remove the callback indirection.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

We only used it once, just remove the callback indirection.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

We only use it once, just remove the callback indirection.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

We only used it once, just remove the callback indirection
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

It indicates how many pages were dirtied during the last second.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>