- 01 8月, 2012 19 次提交
-
-
由 Stefan Hajnoczi 提交于
The vlan implementation in net.c has been replaced by hubs so we can remove the code. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Zhi Yong Wu 提交于
Instead of using VLANState use net/hub.h to support the vlan qdev property. The vlan qdev property becomes an alias for the peer qdev property but is represented as a VLAN ID number. When a VLAN ID is selected the device will really peer with a hub port. Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Stefan Hajnoczi 提交于
Since hubs are now used to implement the 'vlan' feature and the vlan argument is always NULL, remove the argument entirely and update all net clients that use qemu_new_net_client(). Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Stefan Hajnoczi 提交于
Checks can be performed to make sure that hubs have at least one NIC and one host device, warning the user if this is not the case. Configurations which do not meet this rule tend to be broken but just emit a warning. This patch preserves compatibility with the checks performed by net core on vlans. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Stefan Hajnoczi 提交于
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Stefan Hajnoczi 提交于
Stop using the special-case vlan code in net.c. Instead use the hub net client to implement the vlan feature. The next patch will remove vlan code from net.c completely. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Stefan Hajnoczi 提交于
The vlan feature can be implemented in terms of hubs. By introducing a hub net client it becomes possible to remove the special case vlan code from net.c and push the vlan feature out of generic networking code. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
-
由 Corey Bryant 提交于
The bridge helper uses the SIOCBRADDIF ioctl to add an inteface to a bridge. SIOCBRADDIF is not available on old Linux versions. This patch adds support to use the SIOCDEVPRIVATE ioctl with BRCTL_ADD_IF if SIOCBRADDIF is not available. Reported-by: NFabien Chouteau <chouteau@adacore.com> Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Peter Maydell 提交于
If the smartcard configure check passes, add '-I\$(SRC_PATH)/libcacard' to QEMU_INCLUDES, not QEMU_CFLAGS. Otherwise the unexpanded SRC_PATH will cause a warning in every following configure test. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
Fix compile warning in the utimensat/futimens test ("implicit declaration of function 'utimensat'", ditto futimens) by adding a missing include. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
Fix compile warnings in the VDE library probe ("passing argument 1 of 'vde_open_real' discards 'const' qualifier from pointer target type", ditto argument 2). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
Fix compile warning (variable 'png_ptr' set but not used) in the PNG detection test code. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
The old test code raises two compiler warnings which are errors since commit 417c9d72. These errors could result in compilations with compiler flag -march486 (so all nice features of newer processors got lost). Signed-off-by: NStefan Weil <sw@weilnetz.de> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
The distinction between QEMU_CFLAGS and CFLAGS is that the former is for flags without which QEMU can't compile, whereas the latter is for flags like "-g -O2" which the user can safely override. "-march=i486" is in the former category, and so belongs in QEMU_CFLAGS. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
"+=" does not work with dash and other simple /bin/sh implementations. The new code prepends the flag while the old code either did not work (it continued after an error message which typically was not read) or appended the flag. That difference should not matter here. Reported-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NStefan Weil <sw@weilnetz.de> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
Since commit 417c9d72 all configure tests normally run with -Werror. Some of these tests now fail because they raised a compiler warning. This patch fixes support for capabilities. Signed-off-by: NStefan Weil <sw@weilnetz.de> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
Since commit 417c9d72, all configure tests normally run with -Werror. Some of these tests now fail because they raised a compiler warning. Here a build breakage for ALSA (configure --audio-drv-list=alsa) is fixed. Signed-off-by: NStefan Weil <sw@weilnetz.de> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
Don't run configure tests with -Werror in the compiler flags. The idea of -Werror is that it makes problems very obvious to developers, so they get fixed quickly. However, when running configure tests, failures due to -Werror are far from obvious -- they simply result in the test quietly failing when it should have passed. Not using -Werror is in line with recommended practice in the Autoconf world. This commit is essentially backing out the changes in commit 417c9d72. Instead we fix the problem that commit was trying to address in a different way: we add -Werror only for the test of the nss headers, with a comment that this is specifically intended to detect a bug in some releases of nss. We also have to clean up a bug in the smartcard test where it was trying to include smartcard_cflags in the test compile flags: this would always result in a failure with -Werror, because they include an escaped "$(SRC_PATH)" which is only valid when used in the final makefile. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
Split the configure test that checks for valgrind into two, one part checking whether we have the gcc pragma to disable unused-but-set variables, and the other part checking for the existence of valgrind.h. The first of these has to be compiled with -Werror and the second does not and shouldn't generate any warnings. This (a) allows us to enable "make errors in configure tests be build failures" and (b) enables use of valgrind on systems with a gcc which doesn't know about -Wunused-but-set-varibale, like Debian squeeze. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 30 7月, 2012 4 次提交
-
-
由 Anthony Liguori 提交于
* mst/tags/for_anthony: msi/msix: added API to set MSI message address and data pci: Add INTx routing notifier pci: Add pci_device_route_intx_to_irq pci: Unregister BARs before device exit pci: convert PCIUnregisterFunc to void msix: Switch msix_uninit to return void msix: Allow full specification of MSIX layout msix: Split PBA into it's own MemoryRegion msix: Note endian TODO item msix: Move msix_mmio_read virtio: Convert to msix_init_exclusive_bar() interface ivshmem: Convert to msix_init_exclusive_bar() interface msix: Add simple BAR allocation MSIX setup functions msix: fix PCIDevice naming inconsistency msix: drop unused msix_bar_size, require valid bar_size
-
由 Anthony Liguori 提交于
* bonzini/nbd-next: qemu-nbd: add --cache and --aio options qemu-nbd: reorganize help message
-
由 Anthony Liguori 提交于
* bonzini/scsi-next: (32 commits) virtio-scsi: enable MSI-X support virtio-scsi: add ioeventfd support virtio-scsi: report parameter change events virtio-scsi: do not report dropped events after reset virtio-scsi: Report missed events virtio-scsi: Implement hotplug support for virtio-scsi scsi: report parameter changes to HBA drivers scsi-disk: report resized disk via sense codes scsi: establish precedence levels for unit attention scsi: introduce hotplug() and hot_unplug() interfaces for SCSI bus scsi: add tracepoint for scsi_req_cancel scsi-disk: removable hard disks support load/eject scsi-disk: Fail medium writes with proper sense for readonly LUNs scsi-disk: improve the lba-out-of-range tests for read/write/verify scsi-disk: rd/wr/vr-protect !=0 is an error scsi-disk: support toggling the write cache scsi-disk: parse MODE SELECT commands and parameters scsi-disk: fix changeable values for MODE_PAGE_R_W_ERROR scsi-disk: adjust offsets in MODE SENSE by 2 scsi-disk: support emulated TO_DEV requests ...
-
由 Anthony Liguori 提交于
* commit '6c779f22': Change ram_save_block to return -1 if there are no more changes ram: save_live_setup() we don't need to synchronize the dirty bitmap. ram: iterate phase ram: save_live_complete() only do one loop ram: save_live_setup() don't need to sent pages savevm: split save_live into stage2 and stage3 savevm: split save_live_setup from save_live_state savevm: introduce is_active method savevm: Refactor cancel operation in its own operation savevm: remove SaveLiveStateHandler savevm: remove SaveSetParamsHandler savevm: Live migration handlers register the struct directly savevm: Use a struct to pass all handlers
-
- 29 7月, 2012 4 次提交
-
-
由 Michael S. Tsirkin 提交于
Merge master and pci branch, resolve build breakage in hw/esp.c introduced by f90c2bcd. Conflicts: hw/esp.c
-
由 Vitaly Chipounov 提交于
According to the Intel manual "Intel® 64 and IA-32 Architectures Software Developer’s Manual Volume 3", "3.4.4 Segment Loading Instructions in IA-32e Mode": "When in compatibility mode, FS and GS overrides operate as defined by 32-bit mode behavior regardless of the value loaded into the upper 32 linear-address bits of the hidden descriptor register base field. Compatibility mode ignores the upper 32 bits when calculating an effective address." However, the code misses the 64-bit mode case, where an instruction with address and segment size override would be translated incorrectly. For example, inc dword ptr gs:260h[ebx*4] gets incorrectly translated to: (uint32_t)(gs.base + ebx * 4 + 0x260) instead of gs.base + (uint32_t)(ebx * 4 + 0x260) Signed-off-by: NVitaly Chipounov <vitaly.chipounov@epfl.ch> Reviewed-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Paolo Bonzini 提交于
Past contributions since 2012-01-13 were only made by Red Hat people, so they are already available under GPLv2+. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Dunrong Huang 提交于
This patch will fix the following linking failed: LINK qemu-ga gcc: error: qga/../qapi-generated/qga-qapi-types.o: No such file or directory gcc: error: qga/../qapi-generated/qga-qapi-visit.o: No such file or directory gcc: error: qga/../qapi-generated/qga-qmp-marshal.o: No such file or directory make: *** [qemu-ga] Error 1 Commit cdc976b0 changes the dependencies of qemu-ga to depend "../qapi-generated/qga-qapi-types.o", which will be expanded to "qga/../qapi-generated/qga-qapi-types.o" when building qemu-ga. In top-level Makefile, we defined a target "qapi-generated/qga-qapi-types.o" which was not equal to "qga/../qapi-generated/qga-qapi-types" in the Makefile world. So "No such file" error happened when qemu-ga was linking. The easy approach to fix is to change the target name to "qga/../qapi-generated/qga-qapi-types.o", but it is weird. So, in order to solve it more graciously, I move those temporary files(qga-qapi-*.{c,h}) qemu-ga depends on to qemu-ga/qapi-generated, this makes dependencies more clearer. Signed-off-by: NDunrong Huang <riegamaths@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 28 7月, 2012 13 次提交
-
-
由 Blue Swirl 提交于
System headers (e.g. gutils.h) may define 'inline', #undefine it before #defining. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
It's silly and non-conforming to standards to return void, don't do it. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
Drop a duplicate definition of the 'disabled' property from the escc qdev property list: this redefinition is currently effectively ignored but will become an error. (The duplication was inadvertently introduced in 2009 in commit ec02f7de.) Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Acked-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Paolo Bonzini 提交于
After commit dcff25f2, Dependency file are taken from the directories that have a Makefile.objs file. This is not enough, since files can be included from other directories. So, pick them from directories that have an object file in them. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Paolo Bonzini 提交于
No reason to leave them out, and it will ensure that the dependencies are picked up. Later we can perhaps move the files to another directory to avoid ../ usage. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Eduardo Habkost 提交于
Otherwise 'make check' won't recompile files that need to be recompiled because of header changes. To reproduce the bug, run: $ make check # succeeds $ echo B0RKED > hw/mc146818rtc_regs.h $ make check # is supposed to try to rebuild tests/rtc-test.o and fail Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
The qemu_chr_new() function doesn't set errno on failure, so don't print strerror(errno) on the error handling path when dealing with the -serial, -parallel and -virtioconsole arguments. This avoids nonsensical error messages like: $ ./arm-softmmu/qemu-system-arm -serial wombat qemu: could not open serial device 'wombat': Success We also rephrase the message slightly to make it a little clearer that we're expecting the name of a QEMU chr backend rather than a host or guest serial/parallel/etc device. Reported-by: NChristian Müller <christian.mueller@heig-vd.ch> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Max Filippov 提交于
Quote from ISA, 2.1: For most Xtensa instructions, bit numbering is irrelevant; only the BBC and BBS instructions assign bit numbers to values on which the processor operates. The BBC/BBS instructions use big-endian bit ordering (0 is the most-significant bit) on a big-endian processor configuration. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jia Liu 提交于
Add testcases for OpenRISC. Signed-off-by: NJia Liu <proljc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jia Liu 提交于
Add QEMU OpenRISC linux user support. Signed-off-by: NJia Liu <proljc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jia Liu 提交于
Add OpenRISC linux syscall, signal and termbits. Signed-off-by: NJia Liu <proljc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jia Liu 提交于
Add OpenRISC gdb stub support. Signed-off-by: NJia Liu <proljc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jia Liu 提交于
Add OpenRISC system instructions. Signed-off-by: NJia Liu <proljc@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-