since IO block used by CPU hotplug is fixed size and
initialized it the same file as build_legacy_cpu_hotplug_aml()
just use ACPI_GPE_PROC_LEN directly instead of passing
it around in several files.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>

Since AML part of CPU hotplug is tightly coupled with
its hardware part (IO port layout/protocol), move
build_legacy_cpu_hotplug_aml() to cpu_hotplug.c
and remove empty cpu_hotplug_acpi_table.c
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>

now as those defines are used only locally inside of
cpu_hotplug_acpi_table.c, move them out of header file.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>

move the former SSDT part of CPU hoplug close to DSDT part.
AML is only moved but there isn't any functional change.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

ACPI spec requires GPE handlers only for GPE events
that hardware implements.
So remove AML for not supported by QEMU device model
events.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>

print expected file name if it doesn't exists if
verbose mode is enabled*. It helps to avoid running
bios-tables-test under debugger to figure out missing
file name.

*)
verbose mode is enabled if "V" env. variable is set
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>

target-arm queue:
 * support instruction syndrome info for data aborts from A64 to EL2
 * add HSTR_EL2 register
 * fix incorrect ESR IL bits in various syndrome register cases
 * virt: fix limit of 64-bit ACPI/ECAM PCI MMIO range
 * gicv2: RAZ/WI non-sec access to sec interrupts
 * i2c: add aspeed i2c controller
 * virt: Reject gic-version=host for non-KVM (don't segv on aarch64 host)
 * xlnx-zynqmp: Add a secure prop to en/disable ARM Security Extensions
 * xlnx-zynqmp: Support KVM on AArch64 hosts
 * ptimer: Various fixes for awkward corner cases
 * char: QOMify various ARM UART models
 * char: get rid of qemu_char_get_next_serial
 * target-arm: Fix TTBR selecting logic on AArch32 Stage 2 translation
 * zynqmp: Add the ZCU102 board

# gpg: Signature made Mon 06 Jun 2016 17:01:11 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20160606-1: (25 commits)
  zynqmp: Add the ZCU102 board
  target-arm: Fix TTBR selecting logic on AArch32 Stage 2 translation
  char: get rid of qemu_char_get_next_serial
  hw/char: QOM'ify xilinx_uartlite model
  hw/char: QOM'ify stm32f2xx_usart model
  hw/char: QOM'ify digic-uart model
  hw/char: QOM'ify cadence_uart model
  hw/char: QOM'ify pl011 model
  hw/ptimer: Introduce ptimer_get_limit
  hw/ptimer: Support "on the fly" timer mode switch
  hw/ptimer: Update .delta on period/freq change
  hw/ptimer: Perform counter wrap around if timer already expired
  hw/ptimer: Fix issues caused by the adjusted timer limit value
  xlnx-zynqmp: Use the in kernel GIC model for KVM runs
  xlnx-zynqmp: Delay realization of GIC until post CPU realization
  xlnx-zynqmp: Make the RPU subsystem optional
  xlnx-zynqmp: Add a secure prop to en/disable ARM Security Extensions
  hw/arm/virt: Reject gic-version=host for non-KVM
  i2c: add aspeed i2c controller
  hw/intc/gic: RAZ/WI non-sec access to sec interrupts
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Most Zynq UltraScale+ users will be targetting and using the ZCU102
board instead of the development focused EP108. To make our QEMU machine
names clearer add a ZCU102 machine model.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: cc82eec026b2febfca252d73362bb7084616c1ad.1464213234.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Address size is 40-bit for the AArch32 stage 2 translation,
and t0sz can be negative (from -8 to 7),
so we need to adjust it to use the existing TTBR selecting logic.
Signed-off-by: NSergey Sorokin <afarallax@yandex.ru>
Message-id: 1464974151-1231644-1-git-send-email-afarallax@yandex.ru
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

since there is no user of qemu_char_get_next_serial any more,
it's time to let it go away.
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-7-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* drop qemu_char_get_next_serial and use chardev prop
* create xilinx_uartlite_create wrapper function to create
  xilinx_uartlite device
* change affected board code to use the new way
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-6-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* drop qemu_char_get_next_serial and use chardev prop
* change affected board code to use the new way
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-5-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* drop qemu_char_get_next_serial and use chardev prop
* change affected board code to use the new way
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-4-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* drop qemu_char_get_next_serial and use chardev prop
* create cadence_uart_create wrapper function to create
  cadence_uart_device
* change affected board code to use the new way
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-3-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* drop qemu_char_get_next_serial and use chardev prop
* add pl011_create wrapper function to create pl011 uart device
* change affected board code to use the new way
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-2-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Currently ptimer users are used to store copy of the limit value, because
ptimer doesn't provide facility to retrieve the limit. Let's provide it.
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 8f1fa9f90d8dbf8086fb02f3b4835eaeb4089cf6.1464367869.git.digetx@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Allow switching between periodic <-> oneshot modes while timer is running.
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: f030be6e28fbd219e1e8d22297aee367bd9af5bb.1464367869.git.digetx@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Delta value must be updated on period/freq change, otherwise running timer
would be restarted (counter reloaded with old delta). Only m68k/mcf520x
and arm/arm_timer devices are currently doing freq change correctly, i.e.
stopping the timer. Perform delta update to fix affected devices and
eliminate potential further mistakes.
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 4987ef5fdc128bb9a744fd794d3f609135c6a39c.1464367869.git.digetx@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ptimer_get_count() might be called while QEMU timer already been expired.
In that case ptimer would return counter = 0, which might be undesirable
in case of polled timer. Do counter wrap around for periodic timer to keep
it distributed. In order to achieve more accurate emulation behaviour of
certain hardware, don't perform wrap around when in icount mode and return
counter = 0 in that case (that doesn't affect polled counter distribution).
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 4ce381c7d24d85d165ff251d2875d16a4b6a5c04.1464367869.git.digetx@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Multiple issues here related to the timer with a adjusted .limit value:

1) ptimer_get_count() returns incorrect counter value for the disabled
timer after loading the counter with a small value, because adjusted limit
value is used instead of the original.

For instance:
    1) ptimer_stop(t)
    2) ptimer_set_period(t, 1)
    3) ptimer_set_limit(t, 0, 1)
    4) ptimer_get_count(t) <-- would return 10000 instead of 0

2) ptimer_get_count() might return incorrect value for the timer running
with a adjusted limit value.

For instance:
    1) ptimer_stop(t)
    2) ptimer_set_period(t, 1)
    3) ptimer_set_limit(t, 10, 1)
    4) ptimer_run(t)
    5) ptimer_get_count(t) <-- might return value > 10

3) Neither ptimer_set_period() nor ptimer_set_freq() are adjusting the
limit value, so it is still possible to make timer timeout value
arbitrary small.

For instance:
    1) ptimer_set_period(t, 10000)
    2) ptimer_set_limit(t, 1, 0)
    3) ptimer_set_period(t, 1) <-- bypass limit correction

Fix all of the above issues by adjusting timer period instead of the limit.
Perform the adjustment for periodic timer only. Use the delta value instead
of the limit to make decision whether adjustment is required, as limit could
be altered while timer is running, resulting in incorrect value returned by
ptimer_get_count.
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: cd141f74f5737480ec586b9c7d18cce1d69884e2.1464367869.git.digetx@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use the in kernel GIC model when running with KVM enabled.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-5-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Delay the realization of the GIC until after CPUs are
realized. This is needed for KVM as the in-kernel GIC
model will fail if it is realized with no available CPUs.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The way we currently model the RPU subsystem is of quite
limited use. In addition to that, it causes problems for
KVM and for GDB debugging.

Make the RPU optional by adding a has_rpu property and
default to having it disabled.

This changes the default setup from having the RPU to not
longer having it.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a secure prop to en/disable ARM Security Extensions.
This is particularly useful for KVM runs.

Default to disabled to match the behavior of KVM.

This changes the default setup from having the ARM Security
Extensions to not longer having them.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If you try to gic-version=host with TCG on a KVM aarch64 host,
qemu segfaults, since host requires KVM APIs.

Explicitly reject gic-version=host if KVM is not enabled

https://bugzilla.redhat.com/show_bug.cgi?id=1339977Signed-off-by: NCole Robinson <crobinso@redhat.com>
Message-id: b1b3b0dd143b7995a7f4062966b80a2cf3e3c71e.1464273085.git.crobinso@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers
directly connected to the APB bus. They can be programmed as master or
slave but the propopsed model only supports the master mode.

On the TODO list, we also have :

 - improve and harden the state machine.
 - bus recovery support (used by the Linux driver).
 - transfer mode state machine bits. this is not strictly necessary as
   it is mostly used for debug. The bus busy bit is deducted from the
   I2C core engine of qemu.
 - support of the pool buffer: 2048 bytes of internal SRAM (not used
   by the Linux driver).
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org
[PMM: removed unused functions aspeed_i2c_bus_get_state() and
 aspeed_i2c_bus_set_state()]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Treat non-secure accesses to registers and bits in registers of secure
interrupts as RAZ/WI.
Signed-off-by: NJens Wiklander <jens.wiklander@linaro.org>
Message-id: 1464273945-2055-1-git-send-email-jens.wiklander@linaro.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Set the MMIO range limit field to 'base + size - 1' as required.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>
Message-id: 1463856217-17969-1-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Remove some incorrect code from arm_cpu_do_interrupt_aarch64()
which attempts to set the IL bit in the syndrome register based
on the value of env->thumb. This is wrong in several ways:
 * IL doesn't indicate Thumb-vs-ARM, it indicates instruction
   length (which may be 16 or 32 for Thumb and is always 32 for ARM)
 * not every syndrome format uses IL like this -- for some IL is
   always set, and for some it is always clear
 * the code is changing esr_el[new_el] even for interrupt entry,
   which is not supposed to modify ESR_ELx at all

Delete the code, and instead rely on the syndrome value in
env->exception.syndrome having already been set up with the
correct value of IL.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1463487258-27468-3-git-send-email-peter.maydell@linaro.org

For some exception syndrome types, the IL bit should always be set.
This includes the instruction abort, watchpoint and software step
syndrome types; add the missing ARM_EL_IL bit to the syndrome
values returned by syn_insn_abort(), syn_swstep() and syn_watchpoint().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1463487258-27468-2-git-send-email-peter.maydell@linaro.org

Add support for generating the ISS (Instruction Specific Syndrome) for
Data Abort exceptions taken from AArch64.
These syndromes are used by hypervisors for example to trap and emulate
memory accesses.

We save the decoded data out-of-band with the TBs at translation time.
When exceptions hit, the extra data attached to the TB is used to
recreate the state needed to encode instruction syndromes.
This avoids the need to emit moves with every load/store.

Based on a suggestion from Peter Maydell.
Suggested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1462464601-10888-2-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add the Hypervisor System Trap Register for EL2.

This register is used early in the Linux boot and without it the kernel
aborts with a "Synchronous Abort" error.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: ea5aae4b10283de4705b864fe9d4bd2eaddaacae.1463174342.git.alistair.francis@xilinx.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

readdir_r() to readdir() conversion, various minor cleanups

# gpg: Signature made Mon 06 Jun 2016 10:52:52 BST
# gpg:                using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg:                 aka "Greg Kurz <groug@free.fr>"
# gpg:                 aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg:                 aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg:                 aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg:                 aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894  DBA2 02FC 3AEB 0101 DBC2

* remotes/gkurz/tags/for-upstream:
  9p: switch back to readdir()
  9p: add locking to V9fsDir
  9p: introduce the V9fsDir type
  9p: drop useless out: label
  9p: drop useless inclusion of hw/i386/pc.h
  9p/fsdev: remove obsolete references to virtio
  9p: some more cleanup in #include directives
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio-gpu: scanout fix, live migration support
vmsvga: security fixes

# gpg: Signature made Mon 06 Jun 2016 08:05:00 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vga-20160606-1:
  virtio-gpu: add live migration support
  vmsvga: don't process more than 1024 fifo commands at once
  vmsvga: shadow fifo registers
  vmsvga: add more fifo checks
  vmsvga: move fifo sanity checks to vmsvga_fifo_length
  virtio-gpu: fix scanout rectangles
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit fcaafb10 accidentally broke reads from
scsi-disk devices when being updated from its original form to use the new
byte-based block functions. Add the extra missing sector to offset conversion
in order to restore read functionality.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NEric Blake <eblake@redhat.com>
Tested-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1464931021-25117-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

audio: pa volume fix, some qomifying.

# gpg: Signature made Mon 06 Jun 2016 08:01:21 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-audio-20160606-1:
  hw/audio: QOM'ify milkymist-ac97.c
  hw/audio: QOM'ify intel-hda
  hw/audio: QOM cleanup for intel-hda
  hw/audio: QOM'ify cs4231.c
  audio: pa: Set volume of recording stream instead of recording device
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>