FITRIM is a mounted filesystem feature to discard (or "trim") blocks which
are not in use by the filesystem. This is useful for solid-state drives
(SSDs) and thinly-provisioned storage.  Provide access to the feature
from the host so that filesystems can be trimmed periodically or before
migration.

Here is an example using scsi_debug:

    # modprobe scsi_debug lbpu=1 lbpws=1
    # sg_vpd -p0xb2 /dev/sdb
    Logical block provisioning VPD page (SBC):
      Unmap command supported (LBPU): 1
      Write same (16) with unmap bit supported (LBWS): 1
      Write same (10) with unmap bit supported (LBWS10): 0
    # mke2fs /dev/sdb
    # cat /sys/bus/pseudo/drivers/scsi_debug/map
    1-616,16257-16383
    # mount /dev/sdb /run/media/pbonzini/test
    # dd if=/dev/zero of=/run/media/pbonzini/test/file
    # cat map
    1-616,645-1588,1599-4026,4029-16383
    # rm /run/media/pbonzini/test/file
    # ./qemu-ga /dev/fd/0
    {"execute":"guest-fstrim"}
    {"return": {}}
    # cat map
    1-612
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

We will use these functions and types for more than FSFREEZE, so rename them.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Link trace objects to fix these errors:
  LINK  vscclient
oslib-posix.o: In function `trace_qemu_vfree':
/src/qemu/obj-amd64/./trace.h:39: undefined reference to `trace1'
oslib-posix.o: In function `trace_qemu_memalign':
/src/qemu/obj-amd64/./trace.h:31: undefined reference to `trace3'
oslib-posix.o: In function `trace_qemu_vmalloc':
/src/qemu/obj-amd64/./trace.h:35: undefined reference to `trace2'

Add LDFLAGS to vscclient link command.

Clean up also in subdirectories of libcacard.

Use quiet-command for sed invocation.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAlon Levy <alevy@redhat.com>

Add a simple register fuzzing test to floppy controller tests.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Convert uses of FLOPPY_ERROR to either FLOPPY_DPRINTF
(for implemented cases) or to use LOG_UNIMP (unimplemented).
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use LOG_UNIMP for some target CPU cases.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Acked-by: NAlexander Graf <agraf@suse.de>

Add new log category (LOG_UNIMP) for unimplemented functionality.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Don't use global variables directly but via accessor functions. Rename globals.

Convert macros to functions, add GCC format attributes.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move logging functions from exec.c to qemu-log.c,
compile it only once.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The timer was deadlocking when the interval was set too low. It would cause a
flood of timer events and the CPU would halt indefinately. This is a known issue
and theres a generic workaround in place in ptimer on ptimer_set_limit(),
however the Xilinx timer uses ptimer_set_count() instead of set_limit. Changed
the call to set_count() to an equivalent call of set_limit() instead, which
brings the workaround into play.
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The Xilinx timer does not interact with the qemu_timer API, so dont include it.
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

QEMU exposes its version to the guest's hardware and in some cases that is wrong
(e.g. Windows prints messages about driver updates when you switch
the QEMU version).
There is a new field now on the struct QEmuMachine, hw_version, which may
contain the version that the specific machine should report. If that field is
set, then that machine will report that version to the guest.
Signed-off-by: NCrístian Viana <vianac@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds two things. First it allows QEMU to distinguish between
regular powerdown and S4 powerdown. Later separate QMP notification will
be added for S4 powerdown. Second it allows S3/S4 states to be disabled
from QEMU command line. Some guests known to be broken with regards to
power management, but allow to use it anyway. Using new properties
management will be able to disable S3/S4 for such guests.

Supported system state are passed to a firmware using new fw_cfg file.
The file contains  6 byte array. Each byte represents one system
state. If byte at offset X has its MSB set it means that system state
X is supported and to enter it guest should use the value from lowest 3
bits.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

I think I understand enough of what's going on in these rules to ensure this is
right.  But I could certainly use a second or third opinion...
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fedora 17's toolchain wants optimization enabled for _FORTIFY_SOURCE;
so disable _FORTIFY_SOURCE when debugging.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* afaerber-or/qom-next-2: (22 commits)
  qom: Push error reporting to object_property_find()
  qdev: Remove qdev_prop_exists()
  qbus: Initialize in standard way
  qbus: Make child devices links
  qdev: Connect busses with their parent devices
  qdev: Convert busses to QEMU Object Model
  qdev: Move SysBus initialization to sysbus.c
  qdev: Use wrapper for qdev_get_path
  qdev: Remove qdev_prop_set_defaults
  qdev: Clean up global properties
  qdev: Move bus properties to abstract superclasses
  qdev: Move bus properties to a separate global
  qdev: Push "type" property up to Object
  arm_l2x0: Rename "type" property to "cache-type"
  m48t59: Rename "type" property to "model"
  qom: Assert that public types have a non-NULL parent field
  qom: Drop type_register_static_alias() macro
  qom: Make Object a type
  qom: Add class_base_init
  qom: Add object_child_foreach()
  ...

* qmp/queue/qmp:
  build: install qmp-commands.txt
  Add rate limiting of RTC_CHANGE, BALLOON_CHANGE & WATCHDOG events
  Add event notification for guest balloon changes
  Fix some more license versions (GPL2+ instead of GPL2)
  monitor: Fix memory leak with readline completion
  qmp: do not include monitor.h from qapi-types-core.h
  qmp: include monitor.h when needed
  kvm: add missing include files

* kwolf/for-anthony: (39 commits)
  qemu-iotests: add 036 autoclear feature bit test
  qemu-iotests: add qcow2.py set-feature-bit command
  fdc-test: introduced qtest read_without_media
  fdc: fix implied seek while there is no media in drive
  qcow2: fix autoclear image header update
  xen: Don't peek behind the BlockDriverState abstraction
  xen: Don't change -drive if=xen device name during machine init
  block: Replace bdrv_get_format() by bdrv_get_format_name()
  qemu-img: document qed format on qemu-img man page
  qemu-iotests: COW with many AIO requests on the same cluster
  qemu-iotests: Some backing file COW tests
  qcow2: Fix avail_sectors in cluster allocation code
  qcow2: Simplify calculation for COW area at the end
  qcow2: always operate caches in writeback mode
  ide: support enable/disable write cache
  block: always open drivers in writeback mode
  block: add bdrv_set_enable_write_cache
  block: copy enable_write_cache in bdrv_append
  savevm: flush after saving vm state
  block: flush in writethrough mode after writes
  ...

* mst/tags/for_anthony:
  pci_bridge_dev: fix error path in pci_bridge_dev_initfn()
  qdev: release parent properties on dc->init failure
  msi: Use msi/msix_present more consistently
  msi: Invoke msi/msix_write_config from PCI core
  msi: Guard msi/msix_write_config with msi_present
  msi: Invoke msi/msix_reset from PCI core
  msi: Guard msi_reset with msi_present
  ahci: Clean up reset functions
  intel-hda: Fix reset of MSI function
  ahci: Fix reset of MSI function
  rtl8139: honor RxOverflow flag in can_receive method
  shpc: unparent device before free

* sweil/for-anthony:
  Fix some more license versions (GPL2+ instead of GPL2)
  dump: Fix license version (GPL2+ instead of GPL2)
  configure: Fix build for some versions of glibc (9pfs)
  monitor: Fix memory leak with readline completion

Avoids duplicated error_set().
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[AF: Also drop error_set() in object_property_del().]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Can be replaced everywhere with object_property_find().
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Move code to an initfn and finalizer.
Replace do_qbus_create_inplace() with qbus_realize().
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Make qbus children show up as link<> properties.  There is no stable
addressing for qbus children so we use an unstable naming convention.

This is okay in QOM though because the composition name is expected to
be what's stable.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This makes SysBus part of the root hierarchy and all busses children of
their respective parent DeviceState.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This is far less interesting than it sounds.  We simply add an Object to each
BusState and then register the types appropriately.  Most of the interesting
refactoring will follow in the next patches.

Since we're changing fundamental type names (BusInfo -> BusClass), it all needs
to convert at once.  Fortunately, not a lot of code is affected.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[AF: Made all new bus TypeInfos static const.]
[AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

TYPE_SYSTEM_BUS will be local to hw/sysbus.c, so move existing references
to main_system_bus and system_bus_info there.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This makes it easier to remove it from BusInfo.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[AF: Drop now unnecessary NULL initialization in scsibus_get_dev_path()]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Instead, qdev_property_add_static can set the default.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Now that global properties do not depend on buses anymore, set
them directly in the device instance_init function.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

In qdev, each bus in practice identified an abstract superclass, but
this was mostly hidden.  In QOM, instead, these abstract classes are
explicit so we can move bus properties there.

All bus property walks are removed, and all device property walks
are changed to look along the class hierarchy instead.

We would have duplicates if class A defines some properties and its
subclass B does not define any, because class_b->props will be
left equal to class_a->props.

The solution here is to reintroduce the class_base_init TypeInfo
callback, that was present in one of the early QOM versions but
removed (on my request...) before committing.

This breaks global bus properties, an obscure feature when used
with the command-line which is actually useful and used when used by
backwards-compatible machine types.  So this patch also adjusts the
global bus properties in hw/pc_piix.c to refer to the abstract class.

Globals and other properties must be modified in the same patch to
avoid complications related to initialization ordering.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Simple code movement in order to simplify future refactoring.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Now that Object is a type, add an instance_init function and push
the "type" property from qdev to there.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Resolves a name conflict with the qdev "type" property that is about to
be moved to Object.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NMark Langsdorf <mark.langsdorf@calxeda.com>

This resolves a name conflict with the qdev "type" property that is
about to move into Object.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[AF: Add braces missing in original code.]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This protects against unwanted effects of changing TYPE_OBJECT from
NULL to a string.
Suggested-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It's unused.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Right now the base Object class has a special NULL type.  Change this so
that we will be able to add class_init and class_base_init callbacks.
To do this, remove some special casing of ObjectClass that is not really
necessary.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The class_base_init TypeInfo callback was present in one of the early
QOM versions but removed (on my request...) before committing.  We
will need it soon, add it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

A utility function that will be used to implement hierarchical realization.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
[AF: Drop unrelated whitespace change, add Returns: in documentation]
[AF: Use new object_property_is_child() helper.]
Signed-off-by: NAndreas Färber <afaerber@suse.de>