Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu
切换分支/标签
  1. 12 5月, 2017 1 次提交
    • I
      numa: move source of default CPUs to NUMA node mapping into boards · ea089eeb
      由 Igor Mammedov 提交于 
      Originally CPU threads were by default assigned in
round-robin fashion. However it was causing issues in
guest since CPU threads from the same socket/core could
be placed on different NUMA nodes.
Commit fb43b73b (pc: fix default VCPU to NUMA node mapping)
fixed it by grouping threads within a socket on the same node
introducing cpu_index_to_socket_id() callback and commit
20bb648d (spapr: Fix default NUMA node allocation for threads)
reused callback to fix similar issues for SPAPR machine
even though socket doesn't make much sense there.

As result QEMU ended up having 3 default distribution rules
used by 3 targets /virt-arm, spapr, pc/.

In effort of moving NUMA mapping for CPUs into possible_cpus,
generalize default mapping in numa.c by making boards decide
on default mapping and let them explicitly tell generic
numa code to which node a CPU thread belongs to by replacing
cpu_index_to_socket_id() with @cpu_index_to_instance_props()
which provides default node_id assigned by board to specified
cpu_index.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <1494415802-227633-2-git-send-email-imammedo@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
      ea089eeb
  3. 24 4月, 2017 1 次提交
  5. 22 2月, 2017 7 次提交
  7. 21 2月, 2017 3 次提交
    • M
      hw/i386: Deprecate -drive if=scsi with PC machine types · f778a82f
      由 Markus Armbruster 提交于 
      The PC machines (pc-q35-* pc-i440fx-* pc-* isapc xenfv) automatically
create lsi53c895a SCSI HBAs and SCSI devices to honor -drive if=scsi.
For giggles, try -drive if=scsi,bus=25,media=cdrom --- this makes QEMU
create 25 of them.

lsi53c895a is thoroughly obsolete (PCI Ultra2 SCSI, ca. 2000), and
currently has no maintainer in QEMU.  megasas is a better choice,
except with old OSes that lack drivers.  virtio-scsi is a much better
choice when you have a driver, but only (newish) Linux comes with one
in the box.  There is no good default that works for all guests.

Encourage users to pick a non-obsolete SCSI HBA that works for them by
deprecating -drive if=scsi.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-4-git-send-email-armbru@redhat.com>
Acked-By: NPaolo Bonzini <pbonzini@redhat.com>
      f778a82f
    • M
      hw: Deprecate -drive if=scsi with non-onboard HBAs · a64aa578
      由 Markus Armbruster 提交于 
      Block backends defined with "-drive if=T" with T other than "none" are
meant to be picked up by machine initialization code: a suitable
frontend gets created and wired up automatically.

Drives defined with if=scsi are also picked up by SCSI HBAs added with
-device, unlike other interface types.  Deprecate this usage, as follows.

Create the frontends for onboard HBAs in machine initialization code,
exactly like we do for if=ide and other interface types.  Change
scsi_legacy_handle_cmdline() to create a frontend only when it's still
missing, and warn that this usage is deprecated.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-3-git-send-email-armbru@redhat.com>
      a64aa578
    • M
      hw: Default -drive to if=ide explicitly where it works · 2059839b
      由 Markus Armbruster 提交于 
      Block backends defined with -drive if=ide are meant to be picked up by
machine initialization code: a suitable frontend gets created and
wired up automatically.

if=ide drives not picked up that way can still be used with -device as
if they had if=none, but that's unclean and best avoided.  Unused ones
produce an "Orphaned drive without device" warning.

-drive parameter "if" is optional, and the default depends on the
machine type.  If a machine type doesn't specify a default, the
default is "ide".

Many machine types default to if=ide, even though they don't actually
have an IDE controller.  A future patch will change these defaults to
something more sensible.  To prepare for it, this patch makes default
"ide" explicit for the machines that actually pick up if=ide drives:

* alpha: clipper
* arm/aarch64: spitz borzoi terrier tosa
* i386/x86_64: generic-pc-machine (with concrete subtypes pc-q35-*
  pc-i440fx-* pc-* isapc xenfv)
* mips64el: fulong2e
* mips/mipsel/mips64el: malta mips
* ppc/ppc64: mac99 g3beige prep
* sh4/sh4eb: r2d
* sparc64: sun4u sun4v

Note that ppc64 machine powernv already sets an "ide" default
explicitly.  Its IDE controller isn't implemented, yet.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1487153147-11530-2-git-send-email-armbru@redhat.com>
      2059839b
  9. 01 2月, 2017 1 次提交
  11. 25 1月, 2017 1 次提交
  13. 24 1月, 2017 3 次提交
  15. 17 1月, 2017 1 次提交
  17. 22 12月, 2016 3 次提交
  19. 16 11月, 2016 3 次提交
  21. 15 11月, 2016 3 次提交
  23. 03 11月, 2016 1 次提交
  25. 02 11月, 2016 2 次提交
  27. 25 10月, 2016 4 次提交
  29. 24 10月, 2016 1 次提交
  31. 18 10月, 2016 1 次提交
  33. 10 10月, 2016 1 次提交
  35. 14 9月, 2016 1 次提交
    • W
      pc: apic: fix touch LAPIC when irqchip is split · bb93e099
      由 Wanpeng Li 提交于 
      Add -kernel_irqchip=split
./x86-run x86/eventinj.flat

qemu-system-x86_64 -enable-kvm -machine kernel_irqchip=split -cpu host
-device pc-testdev -device isa-debug-exit,iobase=0xf4,iosize=0x4 -vnc
none -serial stdio -device pci-testdev -kernel x86/eventinj.flat
enabling apic
paging enabled
cr0 = 80010011
cr3 = 7fff000
cr4 = 20
Sending vec 33 and 62 and mask one with TPR
irq1 running
irq1 running
After 33/62 TPR test
FAIL: TPR
irq0 running
irq0 running

Both irq1 and irq0 are executing twice.

kvm_entry: vcpu 0
kvm_exit: reason MSR_WRITE rip 0x401f33 info 0 0
kvm_apic: apic_write APIC_EOI = 0x0
kvm_eoi: apicid 0 vector 62
kvm_msr: msr_write 80b = 0x0
kvm_entry: vcpu 0
kvm_exit: reason PENDING_INTERRUPT rip 0x401f35 info 0 0
kvm_userspace_exit: reason KVM_EXIT_IRQ_WINDOW_OPEN (7)
kvm_inj_virq: irq 62
kvm_entry: vcpu 0
kvm_exit: reason IO_INSTRUCTION rip 0x4016ec info 3fd0008 0

From the trace we can see there is an interrupt window exit
after the first interrupt EOI(irq 62), and the same irq(62)
is injected duplicately after the interrupt window.

QEMU does KVM_INTERRUPT(62) ioctl after KVM exits with
KVM_EXIT_IRQ_WINDOW_OPEN, which QEMU requested while the
guest was printing.  The printing calls

serial_update_irq() -> qemu_irq_lower() -> qemu_set_irq() ->
gsi_handler() -> qemu_set_irq() -> pic_irq_request() ->
apic_deliver_pic_intr() -> kvm_handle_interrupt()

kvm_handle_interrupt() does

	interrupt_request |= CPU_INTERRUPT_HARD

which later calls cpu_get_pic_interrupt() in kvm_arch_pre_run(),
but that function uses stale information from APIC and injects
62 again. If we synchronized the APIC, then the test would #GP,
because there would be no injectable interrupt in LAPIC or PIC,
so pic_read_irq() would return 15, thinking it was spurious.

This patch fix it by don't touch LAPIC if LAPIC is in kernel.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Suggested-by: NRadim Krčmář <rkrcmar@redhat.com>
Cc: qemu-stable@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Message-Id: <1473832464-3478-1-git-send-email-wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      bb93e099
  37. 08 9月, 2016 2 次提交