Signed-off-by: NAnton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Message-Id: <1487614915-18710-3-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The purpose of the KVM_SET_SIGNAL_MASK API is to let userspace "kick"
a VCPU out of KVM_RUN through a POSIX signal.  A signal is attached
to a dummy signal handler; by blocking the signal outside KVM_RUN and
unblocking it inside, this possible race is closed:

          VCPU thread                     service thread
   --------------------------------------------------------------
        check flag
                                          set flag
                                          raise signal
        (signal handler does nothing)
        KVM_RUN

However, one issue with KVM_SET_SIGNAL_MASK is that it has to take
tsk->sighand->siglock on every KVM_RUN.  This lock is often on a
remote NUMA node, because it is on the node of a thread's creator.
Taking this lock can be very expensive if there are many userspace
exits (as is the case for SMP Windows VMs without Hyper-V reference
time counter).

KVM_CAP_IMMEDIATE_EXIT provides an alternative, where the flag is
placed directly in kvm_run so that KVM can see it:

          VCPU thread                     service thread
   --------------------------------------------------------------
                                          raise signal
        signal handler
          set run->immediate_exit
        KVM_RUN
          check run->immediate_exit

The previous patches changed QEMU so that the only blocked signal is
SIG_IPI, so we can now stop using KVM_SET_SIGNAL_MASK and sigtimedwait
if KVM_CAP_IMMEDIATE_EXIT is available.

On a 14-VCPU guest, an "inl" operation goes down from 30k to 6k on
an unlocked (no BQL) MemoryRegion, or from 30k to 15k if the BQL
is involved.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This lets us remove a bunch of CONFIG_LINUX defines.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Call kvm_on_sigbus_vcpu asynchronously from the VCPU thread.
Information for the SIGBUS can be stored in thread-local variables
and processed later in kvm_cpu_exec.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Build it on kvm_arch_on_sigbus_vcpu instead.  They do the same
for "action optional" SIGBUSes, and the main thread should never get
"action required" SIGBUSes because it blocks the signal.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move the KVM "eat signals" code under CONFIG_LINUX, in preparation
for moving it to kvm-all.c; reraise non-MCE SIGBUS immediately,
without passing it to KVM.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch should have no semantic change.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The cast is there because sigbus_handler is invoked via sigfd_handler.
But it feels just wrong to use struct qemu_signalfd_siginfo in the
prototype of a function that is passed to sigaction.

Instead, do a simple-minded conversion of qemu_signalfd_siginfo to
siginfo_t.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge the original development branch due to breakage caused by the
MTTCG merge.

Conflicts:
	cpu-exec.c
	translate-common.c
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 077dd742 inadvertently downgraded the 'dtc' submodule,
undoing the increment added in commit 6e85fce0. Revert this,
returning the submodule state to where we should be.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio, pc: fixes, features

virtio support for region caches broke a bunch of stuff - fixing most of
it though it's not ideal.  Still pondering the right way to fix it.
New: VM gen ID and hotplug for PXB.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 02 Mar 2017 06:19:17 GMT
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  hw/pxb-pcie: fix PCI Express hotplug support
  tests/acpi: update DSDT after last patch
  acpi: simplify _OSC
  virtio: unbreak virtio-pci with IOMMU after caching ring translations
  virtio: add missing region cache init in virtio_load()
  virtio: invalidate memory in vring_set_avail_event()
  virtio: guard vring access when setting notification
  virtio: check for vring setup in virtio_queue_empty
  MAINTAINERS: Add VM Generation ID entries
  tests: Move reusable ACPI code into a utility file
  qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commands
  ACPI: Add Virtual Machine Generation ID support
  ACPI: Add vmgenid blob storage to the build tables
  docs: VM Generation ID device description
  linker-loader: Add new 'write pointer' command
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Thu 02 Mar 2017 03:42:59 GMT
# gpg:                using RSA key 0xBDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg:                 aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg:                 aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98  D624 BDBE 7B27 C0DE 3057

* remotes/cody/tags/block-pull-request:
  block/rbd: add support for 'mon_host', 'auth_supported' via QAPI
  block/rbd: add blockdev-add support
  block/rbd: parse all options via bdrv_parse_filename
  block/rbd: add all the currently supported runtime_opts
  block/rbd: don't copy strings in qemu_rbd_next_tok()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Queued sparc patch

# gpg: Signature made Wed 01 Mar 2017 19:53:21 GMT
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC  16A4 AD12 70CC 4DD0 279B

* remotes/rth/tags/pull-tgt-20170302:
  target/sparc: Restore ldstub of odd asis
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

audio: replay support, sdl2 fix.

# gpg: Signature made Wed 01 Mar 2017 15:38:09 GMT
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-audio-20170301-1:
  audio/sdlaudio: Allow audio playback with SDL2
  audio: make audio poll timer deterministic
  replay: add record/replay for audio passthrough
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

docs: update sample configuration files

# gpg: Signature made Wed 01 Mar 2017 13:43:34 GMT
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-docs-20170301-1:
  mach-virt: Provide sample configuration files
  q35: Improve sample configuration files
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Migration pull

Note: The 'postcopy: Update userfaultfd.h header' is part of
Paolo's header update and will disappear if applied after it.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

# gpg: Signature made Tue 28 Feb 2017 12:38:34 GMT
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20170228a: (27 commits)
  postcopy: Add extra check for COPY function
  postcopy: Add doc about hugepages and postcopy
  postcopy: Check for userfault+hugepage feature
  postcopy: Update userfaultfd.h header
  postcopy: Allow hugepages
  postcopy: Send whole huge pages
  postcopy: Mask fault addresses to huge page boundary
  postcopy: Load huge pages in one go
  postcopy: Use temporary for placing zero huge pages
  postcopy: Plumb pagesize down into place helpers
  postcopy: Record largest page size
  postcopy: enhance ram_block_discard_range for hugepages
  exec: ram_block_discard_range
  postcopy: Chunk discards for hugepages
  postcopy: Transmit and compare individual page sizes
  postcopy: Transmit ram size summary word
  migration: fix use-after-free of to_dst_file
  migration: Update docs to discourage version bumps
  migration: fix id leak regression
  migrate: Introduce a 'dc->vmsd' check to avoid segfault for --only-migratable
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Wed 01 Mar 2017 09:02:53 GMT
# gpg:                using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* remotes/elmarco/tags/leak-pull-request: (28 commits)
  tests: fix virtio-blk-test leaks
  tests: add specialized device_find function
  tests: fix usb-test leaks
  tests: allows to run single test in usb-hcd-ehci-test
  usb: release the created buses
  bus: do not unref hotplug handler
  tests: fix virtio-9p-test leaks
  tests: fix virtio-scsi-test leak
  tests: fix e1000e leaks
  tests: fix i440fx-test leaks
  tests: fix e1000-test leak
  tests: fix tco-test leaks
  tests: fix eepro100-test leak
  pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice
  tests: fix ipmi-bt-test leak
  tests: fix ipmi-kcs-test leak
  tests: fix bios-tables-test leak
  tests: fix hd-geo-test leaks
  tests: fix ide-test leaks
  tests: fix vhost-user-test leaks
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ppc patch queue for 2017-03-01

I was hoping to get this pull request squeezed in before the soft
freeze, but I ran into some difficulties during testing.  Everything
here was at least posted before the soft freeze, so I'm hoping we can
still merge it for 2.9.

The biggest things here are:
    * Cleanups to handling of hashed page tables, that will make
      adding support for the POWER9 MMU easier
    * Cleanups to the XICS interrupt controller that will make
      implementing the powernv machine easier
    * TCG implementation of extended overflow and carry handling for
      POWER9

It also includes:
    * Increasing the CPU limit for pseries to 1024 vCPUs
    * Generating proper OF node names in qemu (making hotplug and
      coldplug logic closer together)

# gpg: Signature made Wed 01 Mar 2017 04:43:06 GMT
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.9-20170301: (50 commits)
  Add PowerPC 32-bit guest memory dump support
  ppc/xics: rename 'ICPState *' variables to 'icp'
  ppc/xics: move InterruptStatsProvider to the sPAPR machine
  ppc/xics: move ics-simple post_load under the machine
  ppc/xics: remove the XICSState classes
  ppc/xics: export the XICS init routines
  ppc/xics: move the ICP array under the sPAPR machine
  ppc/xics: register the reset handler of ICP objects
  ppc/xics: simplify spapr_dt_xics() interface
  ppc/xics: use the QOM interface to grab an ICP
  ppc/xics: move the cpu_setup() handler under the ICPState class
  ppc/xics: simplify the cpu_setup() handler
  ppc/xics: move kernel_xics_fd out of KVMXICSState
  ppc/xics: extend the QOM interface to handle ICPs
  ppc/xics: remove the XICS list of ICS
  ppc/xics: register the reset handler of ICS objects
  ppc/xics: remove xics_find_source()
  ppc/xics: use the QOM interface to resend irqs
  ppc/xics: use the QOM interface to get irqs
  ppc/xics: use the QOM interface under the sPAPR machine
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Update OpenBIOS images

# gpg: Signature made Tue 28 Feb 2017 22:09:11 GMT
# gpg:                using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-openbios-signed:
  Update OpenBIOS images to 0cd97cc built from submodule.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

x86 queue, 2017-02-27

"-cpu max" and query-cpu-model-expansion support for x86. This
should be the last x86 pull request before 2.9 soft freeze.

# gpg: Signature made Mon 27 Feb 2017 16:24:15 GMT
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-pull-request:
  i386: Improve query-cpu-model-expansion full mode
  i386: Implement query-cpu-model-expansion QMP command
  i386: Define static "base" CPU model
  i386: Don't set CPUClass::cpu_def on "max" model
  i386: Make "max" model not use any host CPUID info on TCG
  i386: Create "max" CPU model
  qapi-schema: Comment about full expansion of non-migration-safe models
  i386: Reorganize and document CPUID initialization steps
  i386: Rename X86CPU::host_features to X86CPU::max_features
  i386: Add ordering field to CPUClass
  i386: Unset cannot_destroy_with_object_finalize_yet on "host" model
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

seabios: update to 1.10.2 release

# gpg: Signature made Tue 28 Feb 2017 08:57:57 GMT
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-seabios-20170228-1:
  seabios: update to 1.10.2 release
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Queued TCG patch

# gpg: Signature made Tue 28 Feb 2017 21:30:32 GMT
# gpg:                using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC  16A4 AD12 70CC 4DD0 279B

* remotes/rth/tags/pull-tcg-20170301:
  aarch64: Change ext type to TCGType to fix warnings
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add the missing osc method for pxb-pcie devices as APCI spec recommends,
see 6.2.9.1 OSC Implementation Example for PCI Host Bridge Devices, ACPI 3.0a:

    It is recommended that a machine with multiple host bridge devices
    should report the same capabilities for all host bridges, and also
    negotiate control of the features described in the Control Field in
    the same way for all host bridges.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Our _OSC method has a bunch of unused code loading data
into external CTRL and SUPP fields which are then never
used. Drop this in favor of a single local variable.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Commit c611c764 ("virtio: add MemoryListener to cache ring
translations") registers a memory listener to dma_as. This may not
work when IOMMU is enabled: dma_as(bus_master_as) were initialized in
pcibus_machine_done() after virtio_realize(). This will cause a
segfault. Fixing this by using pci_device_iommu_address_space()
instead to make sure address space were initialized at this time.

With this fix, IOMMU device were required to be initialized before any
virtio-pci devices.

Fixes: c611c764 ("virtio: add MemoryListener to cache ring translations")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Commit 97cd965c ("virtio: use
VRingMemoryRegionCaches for avail and used rings") switched to a memory
region cache to avoid repeated map/unmap operations.

The virtio_load() process is a little tricky because vring addresses are
serialized in two separate places.  VIRTIO 1.0 devices serialize desc
and then a subsection with used and avail.  Legacy devices only
serialize desc.

Live migration of VIRTIO 1.0 devices fails on the destination host with:

  VQ 0 size 0x80 < last_avail_idx 0x12f8 - used_idx 0x0
  Failed to load virtio-blk:virtio
  error while loading state for instance 0x0 of device '0000:00:04.0/virtio-blk'

This happens because the memory region cache is only initialized after
desc is loaded and not after the used and avail subsection is loaded.
If the guest chose memory addresses that don't match the legacy ring
layout then the wrong guest memory location is accessed.

Wait until all ring addresses are known before trying to initialize the
region cache.  Also clarify the incomplete comment about VIRTIO-1 ring
address subsection.

Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: NEric Auger <eric.auger@redhat.com>

Remember to invalidate the avail event field so the memory pages are
marked dirty.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NEric Auger <eric.auger@redhat.com>

Switching to vring caches exposed an existing bug in
virtio_queue_set_notification(): We can't access vring structures
if they have not been set up yet. This may happen, for example,
for virtio-blk devices with multiple queues: The code will try to
switch notifiers for every queue, but the guest may have only set up
a subset of them.

Fix this by guarding access to the vring memory by checking for
vring.desc. The first aio poll will iron out any remaining
inconsistencies for later-configured queues (buggy legacy drivers).
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

If the vring has not been set up, there is nothing in the virtqueue.
virtio_queue_host_notifier_aio_poll calls virtio_queue_empty even in
this case; we have to filter it out just like virtio_queue_notify_aio_vq.
Reported-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Also usable by upcoming VM Generation ID tests
Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Add commands to query Virtual Machine Generation ID counter.

QMP command example:
    { "execute": "query-vm-generation-id" }

HMP command example:
    info vm-generation-id
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This implements the VM Generation ID feature by passing a 128-bit
GUID to the guest via a fw_cfg blob.
Any time the GUID changes, an ACPI notify event is sent to the guest

The user interface is a simple device with one parameter:
 - guid (string, must be "auto" or in UUID format
   xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx)
Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This allows them to be centrally initialized and destroyed

The "AcpiBuildTables.vmgenid" array will be used to construct the
"etc/vmgenid_guid" fw_cfg blob.

Its contents will be linked into fw_cfg after being built on the
pc_machine_done() -> acpi_setup() -> acpi_build() call path, and dropped
without use on the subsequent, guest triggered, acpi_build_update() ->
acpi_build() call path.
Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch is based off an earlier version by
Gal Hammer (ghammer@redhat.com)

Requirements section, ASCII diagrams and overall help
provided by Laszlo Ersek (lersek@redhat.com)
Signed-off-by: NGal Hammer <ghammer@redhat.com>
Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This is similar to the existing 'add pointer' functionality, but instead
of instructing the guest (BIOS or UEFI) to patch memory, it instructs
the guest to write the pointer back to QEMU via a writeable fw_cfg file.
Signed-off-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>