- 29 10月, 2011 40 次提交
-
-
由 Paolo Bonzini 提交于
Otherwise, if cancellation is "faked" by the AIO layer and goes through qemu_aio_flush, the whole request is completed synchronously during scsi_req_cancel. Using the enqueued flag would work here, but not in the next patches, so I'm introducing a new io_canceled flag. That's because scsi_req_data is a synchronous callback and the enqueued flag might be reset by the time it returns. scsi-disk cannot unref the request until after calling scsi_req_data. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
This will let scsi-block choose between passthrough and emulation. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Also delete a stale occurrence of SCSIReqOps inside SCSIDeviceInfo. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
The field is only in scsi-disk for now. Moving it up to SCSIDevice makes it easier to reuse the scsi-generic reqops elsewhere. At the same time, make scsi-generic get max_lba from snooped READ CAPACITY commands as well. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Set s->removable, s->qdev.blocksize and s->qdev.type in the callers of scsi_initfn. With this in place, s->qdev.type is allowed, and we can just reuse it as the first byte in VPD data (just like we do in standard INQUIRY data). Also set s->removable is set consistently and we can use it. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
This field is redundant, and having it makes it more complicated to share reqops between the upcoming scsi-block and scsi-generic. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Same as for scsi-generic, avoid duplication even if it causes longer lines. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Instead of "guessing" the block size when there is no medium in the drive, wait for the guest to send a READ CAPACITY command and snoop it from there. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Pass down the host status so that failing transport can be detected by the guest. Similar treatment of host status could be done in virtio-blk, too. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
A succeeding ioctl does not imply that the SCSI command succeeded. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
This is not needed anymore, since asynchronous ioctls were introduced by commit 221f715d (new scsi-generic abstraction, use SG_IO, 2009-03-28). Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
It is not needed, because s->bs is already stored in SCSIDevice, and can be reached from the conf.bs member. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Flush does not go anymore through scsi_disk_emulate_command. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Tested by the Windows Logo Kit SCSI Compliance test. From SBC-3, paragraph 5.25: "The LOGICAL BLOCK ADDRESS field shall be set to zero if the PMI bit is set to zero. If the PMI bit is set to zero and the LOGICAL BLOCK ADDRESS field is not set to zero, then the device server shall terminate the command with CHECK CONDITION status with the sense key set to ILLEGAL REQUEST and the additional sense code set to INVALID FIELD IN CDB". Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
This also requires little more than adding the new argument to scsi_device_find, and the qdev property. All devices by default end up on channel 0. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
This only requires changes in two places: in SCSIBus, we need to look for a free LUN if somebody creates a device with a pre-existing scsi-id but the default LUN (-1, meaning "search for a free spot"); in vSCSI, we need to actually parse the LUN according to the SCSI spec. For vSCSI, max_target/max_lun are set according to the logical unit addressing format in SAM. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Change the devs array into a linked list, and add a scsi_device_find function to navigate the children list instead. This lets the SCSI bus use more complex addressing, and HBAs can talk to the correct device when there are multiple LUNs per target. scsi_device_find may return another LUN on the same target if none is found that matches exactly. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
SCSI buses will need to read the children list first-to-last. This requires using a QTAILQ, because hell breaks loose if you just try inserting at the tail (thus reversing the order of all existing visits from last-to-first to first-to-tail). Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
This adds support for media change notification via the GET EVENT STATUS NOTIFICATION command, used by Linux versions 2.6.38 and newer. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
This patch adds to scsi-disk the missing mode page 0x01 for both disk and CD-ROM drives, and mode page 0x0e for CD drives only. A few offsets were wrong in atapi.c. Also change the 2Ah mode page to expose DVD media read capabilities in the IDE cdrom. This lets you run dvd+rw-mediainfo on the virtual DVD drives. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
A small refactoring of the MODE SENSE implementation in scsi-disk. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
This patch adds a few stub implementations for MMC commands to scsi-disk, to be filled in later in the series. It also adds to scsi-defs.h constants for commands implemented by ide/atapi.c, when missing. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Building on the previous patch, this one adds a media change callback to scsi-disk. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Reporting media change events via unit attention sense codes requires a small state machine: first report "NO MEDIUM", then report "MEDIUM MAY HAVE CHANGED". Unfortunately there is no good hooking point for the device to notice that its pending unit attention condition has been reported. This patch reworks the generic machinery to add one. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
The first two bytes (after the 8-byte ATAPI header) are the mode page number and the number of bytes after the length field itself. Make this clear in the code. The AUDIO_CTL page was filled with wrong values. It is not anymore in MMC, but at least keep the values sane. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
As a complement to the previous patch, move definitions for GET EVENT STATUS NOTIFICATION from the two functions to scsi-defs.h. The NCR_* constants are just bit values corresponding to the ENC_* values, with no offsets even, so keep just one copy. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
The definitions in ide/internal.h are duplicates, since ATAPI commands actually come from SCSI. Use the ones in scsi-defs.h and move the missing ones there. Two exceptions: - MODE_PAGE_WRITE_PARMS conflicts with the "flexible disk geometry" page in scsi-disk.c. It is unused, so pick the latter. - GPCMD_* is left in ide/internal.h, at least for now. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Ronnie Sahlberg 提交于
Signed-off-by: NRonnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
Several BlockDriverState fields are not being reinitialized across bdrv_close()/bdrv_open(). Make sure they are reset to their default values. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
Several block drivers set bs->read_only in .bdrv_open() but block.c:bdrv_open_common() clobbers its value. Additionally, QED uses bdrv_is_read_only() in .bdrv_open() to decide whether to perform consistency checks. The correct ordering is to initialize bs->read_only from the open flags before calling .bdrv_open(). This way block drivers can override it if necessary and can use bdrv_is_read_only() in .bdrv_open(). Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
Using bdrv_close() is not enough to free a BlockDriverState. Since we explicitly create it with bdrv_new(), use bdrv_delete() to close and delete it. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Dong Xu Wang 提交于
If qcow2_cache_flush failed, s->lock will not be unlock. Signed-off-by: NDong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Ronnie Sahlberg 提交于
This patch adds a short description of how to specify a NBD device to QEMU. Syntax for both TCP and Unix Domain Sockets are provided as well as examples. Signed-off-by: NRonnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-