If the connection is interrupted before the first login is successfully
completed qemu-kvm is waiting forever in qemu_aio_wait().

This is fixed by performing an sync login to the target. If the
connection breaks after the first successful login errors are
handled internally by libiscsi.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If an invalid URL is specified iscsi_get_error(iscsi) is called
with iscsi == NULL.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

g_assert_cmpint is not available on glib 2.12, which is the minimum
version required to build QEMU (we only require 2.16 to run tests,
since that is the first version including GTester).  Do not use it
in hardware models, use a normal assertion instead.

This fixes the buildbot failure for default_x86_64_rhel5.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The cancellation test is failing on the buildbots.  While the failure
merits a little more investigation to understand what is going on,
the logs show that the failure is not impacting the coverage
provided by the test.  Hence, loosen a bit the assertions in a
way that should let the test proceed and hopefully pass.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fix typos, whitespace and update comments to match current
implementation.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Disable the rate-limit timer on device remove (e.g. hot-unplug).
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If we got fewer bytes from the backend than requested, don't poke the
backend for more bytes; the guest will ask for more (or if the guest has
already asked for more, the backend knows about it via handle_input()).
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Popping an elem from the vq just to find out its length causes problems
with save/load later on.  Use the new virtqueue_get_avail_bytes()
function instead, saves us the complexity in the migration code, as well
as makes the migration endian-safe.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It used a wrong struct type name since its introduction in
8f04ee08 (isa: pic: convert to QEMU
Object Model), apparently it is unused so far.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

visit_type_size() requires either visitor->type_size() or
visitor_uint64() to be implemented, otherwise a NULL function pointer is
invoked.

It is possible to trigger this crash as follows:

  $ qemu-system-x86_64 -netdev tap,sndbuf=0,id=netdev0 \
                       -device virtio-blk-pci,netdev=netdev0

The 'sndbuf' option has type "size".
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When adding the Haswell CPU model, I intended to make it a superset of the
features present on the SandyBridge model, but I have removed the SEP and
RDTSCP features from the feature list by mistake. This patch adds the missing
SEP and RDTSCP features (that are present on SandyBridge) to Haswell.
Reported-by: NMartin Kletzander <mkletzan@redhat.com>
Acked-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit 094b287f accidentally broke the "-usb" command line
option, so it would have no effect if the user had not specified
any machine options at that point. (the return value from
'qemu_opts_find(qemu_find_opts("machine"), 0);' is NULL if there
are no user specified options, so it is only to be used for
looking up an option, not when trying to set one.) Similarly,
would '-usbdevice' no longer cause USB to default to enabled.

Fix this regression by using the same style of code for forcing
the usb=on machine option that we use for other aliases such as
'-enable-kvm'.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It is not used anymore, and there is no need to make it public.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

All conditional deallocation can now be done with object_delete.
Remove the @qom_allocated and @glib_allocated fields; replace the latter
with a direct assignment of the @free function pointer.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Store in the object the freeing function that will be used at deletion
time.  This makes it possible to use object_delete on statically-allocated
(embedded) objects.  Dually, it makes it possible to use object_unparent
and object_unref without leaking memory, when the lifetime of object
might extend until after the call to object_delete.
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add an ObjectClass method that is done at object_unparent time.  It
should remove any backlinks to the object in the composition tree,
so that object_delete will be able to drop the last reference and
free the object.

Use it for qdev buses.
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The reference count for embedded objects is always one too low, because
object_initialize_with_type returns with zero references to the object.
This causes premature finalization of the object (or an assertion failure)
after calling object_ref to add an extra reference and object_unref to
remove it.

The fix is to move the initial object_ref call from object_new_with_type
to object_initialize_with_type.
Acked-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit 0d936928 (qdev: Convert busses to QEMU Object Model, 2012-05-02)
removed a check on the type of the bus where a SCSI disk is hotplugged.
However, hot-plugging to the wrong kind of device now causes a crash
due to either a NULL pointer dereference (avoided by the previous patch)
or a failed QOM cast.

Instead, in this case we need to use object_dynamic_cast and check for
the result, similar to what was done before that commit.
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Trying to cast a NULL value will cause a crash.  Returning
NULL is also sensible, and it is also what the type-unsafe
DO_UPCAST macro does.
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The repeated calls to WaitForMultipleObjects may cause a livelock in aio_poll,
where no progress is made on bottom halves.  This patch matches the behavior
of the POSIX code.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Avoid passing a non-PCI IRQ to ich9_gsi_to_pirq. It's wrong and triggers
an assertion.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Same as for i44fx: KVM does not support SMM yet. Signal it initialized
to Seabios to avoid failures.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add the dmi-to-pci i82801b11 bridge chip. This is the pci bridge chip
that q35 uses on its host bus for PCI bus arbitration.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

pc q35 based chipset emulator to support pci express natively. Based on
Anthony Liguori's suggestion, the machine name is 'q35-next', with an alias
of 'q35'. At this point, there are no compatibility guarantees. When the
chipset stabilizes more, we will begin to version the machine names.

Major features which still need to be added:

-Migration support (mostly around ahci)
-ACPI hotplug support (pcie hotplug support is working)
-Passthrough support
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add support for the ich9 smbus chip.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add support for the ICH9 LPC chip.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Lay the groundwork for subsequent ich9 support.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Factor out smram/pam logic for use by other chipsets, namely q35
at this point.

Note: Should be factored out into a generic North Bridge Class.

[jbaron@redhat.com: changes for updated memory API]
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Rename: kvm_piix3_gsi_handlei() -> kvm_pc_gsi_handler()
        kvm_piix3_setup_irq_routing() -> kvm_pc_setup_irq_routing()

This is in preparation for other users, namely q35 at this time.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move ioapic_init() from pc_piix.c to pc.c, to make it a common function.
Rename ioapic_init() -> ioapic_init_gsi().
Move to pc.h so q35 can use them as well.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Factor out pc nic initialization.
This simplifies the pc initialization and will reduce the code
duplication of q35 pc initialization.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* qemu-kvm/uq/master:
  Legacy qemu-kvm options have no argument
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* kraxel/usb.72:
  usb-redir: Don't handle interrupt output packets async
  usb-redir: Split usb_handle_interrupt_data into separate in/out functions
  usb-smartcard-reader: Properly NAK interrupt eps when we've no events
  usb-bt: Return NAK instead of STALL when interrupt ep has no data
  uhci: Fix double unlink
  uhci: Don't allow the guest to set port-enabled when there is no dev connected
  uhci: Add a completions_only flag for async completions
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* spice/spice.v64:
  spice: add new spice-server callbacks to ui/spice-display.c
  Fix the inconsistency in x509-dh-key-file parameter
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* stefanha/block:
  ide: Fix status register after short PRDs
  ide: Fix crash with too long PRD
  use int64_t for return values from rbd instead of int
  vdi: don't override libuuid symbols
  block: add bdrv_reopen() support for raw hdev, floppy, and cdrom
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* stefanha/net:
  tap: reset vnet header size on open
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>