* 'w64' of git://qemu.weilnetz.de/qemu:
  w64: Fix time conversion for some versions of MinGW-w64
  nbd: Fix compiler warning (w64)
  disas: Replace 'unsigned long' by 'uintptr_t'
  cpu-exec: Remove non-portable type cast and fix format string
  target-mips: Fix type cast for w64 (uintptr_t)
  w64: Fix type cast in os_host_main_loop_wait
  w64: Fix data types in softmmu*.h
  w64: Use uintptr_t in exec.c
  softmmu: Use uintptr_t for physaddr and rename it
  w64: Fix struct CPUTLBEntry
  w64: Fix definition of setjmp
  w32: Move defines for socket specific errors to qemu-os-win32.h
  w64: Use larger alignment for section with generated code
  w64: Fix data types in cpu-all.h, exec.c
  w64: Fix type casts used in some macros in cpu-all.h
  tcg/i386: Add support for w64 ABI
  tcg/i386: Use GDB JIT debugging interface only for hosts with ELF

Move code from cpu_alpha_init() into a CPU initializer.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NRichard Henderson <rth@twiddle.net>

Embed CPUAlphaState as first member of AlphaCPU.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NRichard Henderson <rth@twiddle.net>

tb.time is a time value, but not necessarily of the same size as time_t:
while time_t is 64 bit for w64, tb.time still is 32 bit only.

Therefore we need en explicit conversion.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

Portable printing of dev_offset (data type off_t) needs a type cast.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

This is needed for w64. It changes nothing for other hosts.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

This change is needed for w64, but also changes the code for other hosts.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

This changes nothing for other hosts.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

Casting a pointer to an integer must use (DWORD_PTR) instead of (DWORD).
This also matches the definition of 'fd' (gint for w32, gint64 for w64).
Signed-off-by: NStefan Weil <sw@weilnetz.de>

w64 requires uintptr_t.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

Replace all type casts to 'long' or 'unsigned long' by 'intptr_t' or 'uintptr_t'.

For type casts which are only used to extract the lower bits of an address
or to modify those bits, signedness does not matter. There I always use 'uintptr_t'.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

Variable physaddr is a host address which should be represented by
data type 'uintptr_t'.

This is needed for w64 and changes nothing for other hosts.

v2:
Rename physaddr -> hostaddr (suggested by Blue Swirl).
Signed-off-by: NStefan Weil <sw@weilnetz.de>

For w64, some entries need 'uintptr_t' instead of 'unsigned long'.

For other host systems, both data types are identical, so nothing changes.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

The default definition of setjmp which is implemented in MinGW-w64
cannot be used with programs like QEMU which call longjmp from
code without structured exception handling (SEH).

This code therefore disables stack unwinding.

We could also implement SEH for QEMU's generated JIT code, but
that is much more difficult. Stack unwinding would also cost
execution time.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

As those defines are only used for w32,
they should be in the header file for w32.

All files which include slirp.h or qemu_socket.h also
include qemu-os-win32.h.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

The MinGW-w64 compiler allows __attribute__((aligned (32)).
Signed-off-by: NStefan Weil <sw@weilnetz.de>

w64 needs uintptr_t instead of unsigned long.
For other hosts, nothing changes.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

Instead of type casts to long, w64 needs type casts to intptr_t.
For other hosts, this changes nothing.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

w64 uses the registers rcx, rdx, r8 and r9 for function arguments,
so it needs a different declaration of tcg_target_call_iarg_regs.

rax, rcx, rdx, r8, r9, r10 and r11 may be changed by function calls.

rbx, rbp, rdi, rsi, r12, r13, r14 and r15 remain unchanged by function calls.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NStefan Weil <sw@weilnetz.de>

Not all i386 / x86_64 hosts use ELF.
Ask the compiler whether ELF is used.

On w64, gdb crashes when ELF_HOST_MACHINE is defined.

Cc: Blue Swirl <blauwirbel@gmail.com>
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NStefan Weil <sw@weilnetz.de>

* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf:
  pseries: Fix reset of VIO network device
  pseries: Reset vscsi properly
  pseries: Correctly use the device model reset hooks
  pseries: Remove old hcalls hook stub
  pseries: Remove old debug leftovers from spapr_vscsi
  pseries: Fix RTAS based config access
  target-ppc/machine.c: Drop unnecessary ifdefs
  target-ppc: Init dcache and icache size for e500 user mode
  target-ppc: Fix type casts for w64 (uintptr_t)
  target-ppc: QOM'ify CPU reset
  target-ppc: Start QOM'ifying CPU init
  target-ppc: QOM'ify CPU
  target-ppc: Add hooks for handling tcg and kvm limitations
  target-ppc: Drop cpu_ppc_close()
  pseries: Consolidate hack for RTAS display-character usage
  pseries: Remove unused fields from VIOsPAPRBus structure
  pseries: Implement RTAS system-reboot call
  pseries: Fix bug with reset of VIO CRQs
  pseries: Clean up hcall_dprintf() debugging messages
  PPC: Fix TLB invalidation bug within the PPC interrupt handler.

Currently, the PAPR VIO network device does not have a reset handler.  This
means that after a hard reset, H_REGISTER_LOGICAL_LAN will return an error
when the new guest boot attempts to initialize the device.

This patch corrects this, adding a suitable reset hook.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Currently the PAPR vscsi implementation does not properly clear its table
of request tags when the system is reset.  This patch adds a reset hook
to do so.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Recently we added code to properly clean away VIO CRQs on reset  However,
this directly uses qemu_register, rather than the existing device model
reset callbacks.  This patch cleans this up by adding proper use of the
reset hook to the VIO bus model.  The existing CRQ reset code is converted
to the new method.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Some time ago we removed all use of the 'hcalls' callback in the pseries
VIO code, which was used to workaround an ordering problem which has since
been solved properly.  However, the function pointer for the hook remains.
This patch cleans it away.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The PAPR VSCSI emulation contains a few lines of code which were once used
for debug but now do nothing at all.  This patch removes them.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

On the pseries platform, access to PCI config space is via RTAS calls(
which go to the hypervisor) rather than MMIO.  This means we don't use
the same code path as nearly everyone else which goes through pci_host.c
and we're missing some of the parameter checking along the way.

We do have some parameter checking in the RTAS calls, but it's not enough.
It checks for overruns, but does not check for unaligned accesses,
oversized accesses (which means the guest could trigger an assertion
failure from pci_host_config_{read,write}_common().  Worse it doesn't do
the basic checking for the number of RTAS arguments and results before
accessing them.

This patch fixes these bugs.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
[AF: Fix typos spotted by mst]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This is Diamond 233L Standard Core Rev.C (LE), implemented through
linux/gdb overlay.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

For QOM'ified CPUs we cannot g_free() CPUArchState, we must
object_delete() the object it is embedded into.

Fixes LP#982321 (invalid free() while executing pacman with qemu-arm).
Reported-by: NSerge Schneider <serge@xecdesign.com>
Reported-by: NRussell Keith Davis <russell@russelldavis.org>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NSerge Schneider <serge@xecdesign.com>
Tested-by: NRussell Keith Davis <russell@russelldavis.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

machine.c is only compiled for softmmu targets, so checks for
!defined(CONFIG_USER_ONLY) are unnecessary and can be dropped.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
[AF: Use more verbose commit message suggested by PMM]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

commit f7aa5583 pulled the dcache and icache
line size initialization inside of a '#if !defined(CONFIG_USER_ONLY)' block.
This is not correct because instructions like 'dcbz' need the dcache size
initialized even for user mode.
Signed-off-by: NMeador Inge <meadori@codesourcery.com>
Cc: Varun Sethi <Varun.Sethi@freescale.com>
[AF: Simplify #ifdefs by using cache line size 32 for *-user as before]
Suggested-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This changes nothing for other hosts.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Move code from cpu_state_reset() into ppc_cpu_reset().
Reorder #include of helper_regs.h to use it in translate_init.c.

Adjust whitespace and add braces.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>

Move code not dependent on ppc_def_t from cpu_ppc_init() into an initfn.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>

Embed CPUPPCState as first member of PowerPCCPU.
Distinguish between "powerpc-cpu", "powerpc64-cpu" and
"embedded-powerpc-cpu".

Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>

On target-ppc, our table of CPU types and features encodes the features as
found on the hardware, regardless of whether these features are actually
usable under TCG or KVM.  We already have cases where the information from
the cpu table must be fixed up to account for limitations in the emulation
method we're using.  e.g. TCG does not support the DFP and VSX instructions
and KVM needs different numbering of the CPUs in order to tell it the
correct thread to core mappings.

This patch cleans up these hacks to handle emulation limitations by
consolidating them into a pair of functions specifically for the purpose.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
[AF: Style and typo fixes, rename new functions and drop ppc_def_t arg]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It is unused, so avoid QOM'ifying it unneededly.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>

Currently the pseries machine contains not one but two somewhat ugly hacks
to allow printing of early debug messages before the guest has properly
read the device tree.

First, we special case H_PUT_TERM_CHAR so that a vtermno of 0 (usually
invalid) will look for a suitable vty and use that.  This supports Linux's
early debug code which will use H_PUT_TERM_CHAR with vtermno==0 before
reading the device tree.  Second, we support the RTAS display-character call.
This takes no vtermno so we assume the address of the default first VTY.

This patch makes things more consistent by folding the second hack into the
first.  Now, display-character uses the existing vty_lookup() function to
do the same search for a suitable VTY.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndreas Färber <afaerber@suse.de>